The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A Novel Duty Cycle Control Strategy to Reduce Both Torque and Flux Ripples for DTC of Permanent Magnet Synchronous Motor Drives With Switching Frequency Reduction
Abstract
Conventional switching-table-based direct torque control (DTC) presents large torque and flux ripples as well as variable switching frequency. Many methods have been proposed to tackle the aforementioned problems, among which duty cycle control is a kind of very effective approach. It is known that by adjusting the duty ratio of the active vector selected from the switching table, the torque ripple can be reduced. However, most of the prior duty cycle control methods only focus on the torque performance improvement and fail to take the flux ripple reduction into account. Furthermore, the methods obtaining the duty ratio are usually complicated and relies heavily on the accuracy of machine parameters, which negates the merits of simplicity and robustness of conventional DTC. This paper proposes a unified switching table to select three vectors rather than two vectors in prior arts; hence, lower flux ripple and more sinusoidal stator current can be obtained while maintaining the torque performance. A very simple but effective method is proposed to obtain the durations of the three vectors. The influence of one-step delay caused by digital implementation is investigated. By arranging the switching sequence of the three vectors appropriately, the switching frequency can be significantly reduced. The superiority of the novel method is confirmed by a comparative study with its counterpart using two vectors only. Both simulation and experimental results obtained from a 1-kW permanent magnet synchronous motor (PMSM) DTC drive are presented to validate the effectiveness of the novel duty cycle control strategy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Foo, G. H. B., & Rahman, M. F. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2036354 · Cited by 190 · cited 1×
“including permanent magnet synchronous motor (PMSM) [3], [ 4 ], doubly fed induction generator (DFIG) [5], synchronous reluctance machine [6], etc.”
Background
Cited by
Model Predictive Direct Power Control of a PWM Rectifier With Duty Cycle Optimization
Zhang, Y., Xie, W., Li, Z., & Zhang, Y. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2243846 · Cited by 304
Self-citation
Metadata
- Authors
- Zhang, Y., & Zhu, J.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2011-10
- Volume
- 26
- Issue
- 10
- Pages
- 3055-3067
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2140308545
- Cited by
- 201
- References
- 1
- FWCI
- 10.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.