The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Single-Switch High Step-Up Converters With Built-In Transformer Voltage Multiplier Cell
Abstract
In this paper, a built-in voltage gain extension cell is proposed to give a universal topology derivation on next-generation high step-up converters for large voltage gain conversion systems. Several improved single-switch high step-up converters with built-in transformer voltage multiplier cell are derived with some advantageous performance, which includes extremely large voltage conversion ratio, minimized power device voltage stress, effective diode reverse-recovery alleviation, and soft-switching operation. The turns ratio of the built-in transformer can be employed as another design freedom to extend the voltage gain, which shows great design flexibility. Compared with their active clamp counterpart, only one MOSFET is required to simplify the circuit configuration and improve the system reliability. The over resonance frequency and the below resonance frequency operation modes are studied to explore the circuit performance, and the key parameter design criterion is provided to show a valuable guidance for future industrial applications. Finally, the experimental results from a 500 W 36-380 V prototype are provided to validate the effectiveness of the main contributions in this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Self-citation
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Overview of High-Step-Up Coupled-Inductor Boost Converters
Liu, H., Hu, H., Wu, H., Xing, Y., & Batarseh, I. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2532930 · Cited by 432
Forouzesh, M., Shen, Y., Yari, K., Siwakoti, Y. P., & Blaabjerg, F. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2746750 · Cited by 431
Nonisolated High Gain DC–DC Converter for DC Microgrids
Lakshmi, M., & Hemamalini, S. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733463 · Cited by 341
Metadata
- Authors
- Deng, Y., Rong, Q., Li, W., Zhao, Y., Shi, J., & He, X.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2012-08
- Volume
- 27
- Issue
- 8
- Pages
- 3557-3567
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2031679376
- Cited by
- 172
- References
- 1
- FWCI
- 9.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.