An Improved Pulse Width Modulation Method for Chopper-Cell-Based Modular Multilevel Converters
The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Abstract
In this paper, an improved pulse width modulation (PWM) method for chopper-cell (or half-bridge)based modular multilevel converters (MMCs) is proposed. This method can generate an output voltage with maximally 2N+1 (where N is the number of submodules in the upper or lower arm of MMC) levels, which is as great as that of the carrier-phase-shifted PWM (CPSPWM) method. However, no phase-shifted carrier is needed. Compared with the existing submodule unified pulse width modulated (SUPWM) method, the level number of the output voltage is almost doubled and the height of the step in the staircase voltage is reduced by 50%. Meanwhile, the equivalent switching frequency in the output voltage is twice that of the conventional SUPWM method. All these features lead to much reduced harmonic content in the output voltage. What is more, the voltages of the submodule capacitors can be well balanced without any close-loop voltage balancing controllers which are mandatory in the CPSPWM schemes. Simulation and experimental results on a MMC-based inverter show validity of the proposed method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multilevel inverters: a survey of topologies, controls, and applications
Rodriguez, J., Lai, J.-S., & Peng, F. Z. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2002.801052 · Cited by 6,715 · cited 1×
“Among the existing circuits, the cascaded, diode-clamped, and capacitor-clamped topologies are usually recognized as the three most common types [1]–[5].”
BackgroundRecent Advances and Industrial Applications of Multilevel Converters
Kouro, S., Malinowski, M., Gopakumar, K., Pou, J., Franquelo, L. G., Wu, B., Rodriguez, J., Pérez, M. A., & Leon, J. I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049719 · Cited by 3,872
An innovative modular multilevel converter topology suitable for a wide power range
Lesnicar, A., & Marquardt, R. (2004) · 2003 IEEE Bologna Power Tech Conference Proceedings, · doi:10.1109/ptc.2003.1304403 · Cited by 2,908
A Survey on Cascaded Multilevel Inverters
Malinowski, M., Gopakumar, K., Rodriguez, J., & Pérez, M. A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030767 · Cited by 2,322
A Survey on Neutral-Point-Clamped Inverters
Rodriguez, J., Bernet, S., Steimer, P. K., & Lizama, I. E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2032430 · Cited by 1,813
Control and Experiment of Pulsewidth-Modulated Modular Multilevel Converters
Hagiwara, M., & Akagi, H. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2014236 · Cited by 1,565 · cited 4×
“The use of coupled inductors will result in considerable reductions in size, weight, and cost to the magnetic core [5], [10].”
BackgroundMethodInfluentialDynamic Performance of a Modular Multilevel Back-to-Back HVDC System
Saeedifard, M., & Iravani, R. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2050787 · Cited by 1,188 · cited 1×
“They include the carrier-phase-shifted PWM (CPSPWM) method in [10] and [11] and the submodules unified pulse width modulated (SUPWM) method in [12]–[15].”
MethodClassification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC)
Akagi, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143431 · Cited by 1,172
Modulation, Losses, and Semiconductor Requirements of Modular Multilevel Converters
Rohner, S., Bernet, S., Hiller, M., & Sommer, R. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031187 · Cited by 934 · cited 2×
“This reference voltage is obtained by considering the staircase waveform of uan and uU [13].”
BackgroundMethodOn dynamics and voltage control of the Modular Multilevel Converter
Antonopoulos, A., Ängquist, L., & Nee, H. (2009) · European Conference on Power Electronics and Applications · Cited by 831
Cited by
Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346
Modular Multilevel Converters for HVDC Applications: Review on Converter Cells and Functionalities
Nami, A., Liang, J., Dijkhuizen, F., & Demetriades, G. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2327641 · Cited by 1,042
Dekka, A., Wu, B., Fuentes, R. L., Perez, M., & Zargari, N. R. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2742938 · Cited by 576
“root mean square (RMS) value of the arm current [97].”
Pou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336608 · Cited by 406
Analysis of the Phase-Shifted Carrier Modulation for Modular Multilevel Converters
Li, B., Yang, R., Xu, D., Wang, G., Wang, W., & Xu, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2299802 · Cited by 403
Gowaid, I. A., Adam, G. P., Massoud, A. M., Ahmed, S., Holliday, D., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2306453 · Cited by 356
Mei, J., Xiao, B., Shen, K., Tolbert, L. M., & Zheng, J. Y. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2243758 · Cited by 319
Islam, M. R., Guo, Y., & Zhu, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2290313 · Cited by 301
A Control Method for Voltage Balancing in Modular Multilevel Converters
Deng, F., & Chen, Z. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2251426 · Cited by 296
Zhang, M., Huang, L., Yao, W., & Lu, Z. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2269140 · Cited by 292
A Level-Increased Nearest Level Modulation Method for Modular Multilevel Converters
Hu, P., & Jiang, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2325875 · Cited by 254
Analysis and Injection Control of Circulating Current for Modular Multilevel Converters
Wang, J., Han, X., Ma, H., & Bai, Z. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2808901 · Cited by 109
Gong, Z., Wu, X., Dai, P., & Zhu, R. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844836 · Cited by 106
Ronanki, D., & Williamson, S. S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2884610 · Cited by 106
Tai, B., Gao, C., Liu, X., & Chen, Z. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2535463 · Cited by 46
Metadata
- Authors
- Li, Z., Wang, P., Zhu, H., Chu, Z., & Li, Y.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2012-08
- Volume
- 27
- Issue
- 8
- Pages
- 3472-3481
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2008873097
- Cited by
- 249
- References
- 19
- FWCI
- 17.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.