Hybrid-Switching Full-Bridge DC–DC Converter With Minimal Voltage Stress of Bridge Rectifier, Reduced Circulating Losses, and Filter Requirement for Electric Vehicle Battery Chargers
The DOI matches its Crossref record.
Abstract
This paper first presents a hybrid-switching step-down dc-dc converter, and then, by introducing transformer isolation, a novel hybrid-switching phase-shift full-bridge dc-dc converter is derived for electric vehicle battery chargers. The proposed converter provides wide zero-voltage-switching range in the leading-leg switches, achieves zero-current-switching for lagging-leg switches, and uses a hybrid-switching method to avoid freewheeling circulating losses in the primary side. Because the resonant capacitor voltage of the hybrid-switching circuit is applied between the bridge rectifier and the output inductor for the duration of the freewheeling intervals, a smaller sized output inductor can be utilized. With the current rectifier diode of the hybrid-switching circuit providing a clamping path, the voltage overshoots that arise during the turn-off of the rectifier diodes are eliminated and the voltage stress of bridge rectifier is clamped to the minimal achievable value, which is equal to secondary-reflected input voltage of the transformer. The inductive energy stored in the output inductor and the capacitive energy stored in the resonant capacitor of the hybrid-switching circuit are transferred to the output simultaneously during the freewheeling intervals with only one diode in series in the current path, achieving more effective and efficient energy transfer. The effectiveness of the proposed converter was experimentally verified using a 3.6-kW prototype circuit designed for electric vehicle onboard chargers. Experimental results of the hardware prototype show that the converter achieves a peak efficiency of 98.1% and high system efficiencies over wide output voltage and power ranges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
He, P., & Khaligh, A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2630927 · Cited by 501
Ji, B., Pickert, V., Cao, W., & Zahawi, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2251358 · Cited by 329
Shen, Y., Zhao, W., Chen, Z., & Cai, C. (2018) · IEEE Access · doi:10.1109/access.2018.2811760 · Cited by 157
“The output voltage of the PSFB converter can be regulated by using phase-shift control in a wide voltage range, but it is hard to realize ZVS for the lagging leg switches in light loads condition and there are the problem of duty cycle losses of secondary side [9], [10].”
BackgroundHybrid PWM-Resonant Converter for Electric Vehicle On-Board Battery Chargers
Lee, I.-O. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2456635 · Cited by 134
“In general, the OBC consists of a power factor corrector and an isolated dc–dc converter that recharges directly the battery in EVs within the output voltage range of 250–420 V [1]–[3].”
Background
Metadata
- Authors
- Gu, B., Lai, J.-S., Kees, N., & Zheng, C.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2013-03
- Volume
- 28
- Issue
- 3
- Pages
- 1132-1144
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2104910888
- Cited by
- 182
- References
- 0
- FWCI
- 10.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hybrid-Switching Full-Bridge DC–DC Converter With Minimal Voltage Stress of Bridge Rectifier, Reduced Circulating Losses, and Filter Requirement for Electric Vehicle Battery Chargers. https://app.cochat.ai/papers/10.1109/tpel.2012.2210565
- The paper
- Gu, B., Lai, J.-S., Kees, N., & Zheng, C. (2013). Hybrid-Switching Full-Bridge DC–DC Converter With Minimal Voltage Stress of Bridge Rectifier, Reduced Circulating Losses, and Filter Requirement for Electric Vehicle Battery Chargers. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2012.2210565
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.