The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Hybrid PWM-Resonant Converter for Electric Vehicle On-Board Battery Chargers
Abstract
A novel hybrid pulse-width-modulation resonant converter is presented in this paper for electric vehicle (EV) 3.3-kW on-board battery chargers (OBCs). While the proposed converter has all the benefits of the earlier developed hybrid converters for OBCs, the proposed converter has fewer components and achieves much lower voltage stress in the rectifying diodes compared to the earlier hybrid converters. As a result, it is possible to employ superior diodes such as Schottky barrier diodes below 300 V featuring low forward-voltage drop and better reverse-recovery for EV 3.3-kW OBC applications. In addition, the proposed converter achieves much better transformer utilization compared to the earlier hybrid converters. Due to this, the proposed converter can achieve more optimal efficiency over the overall battery charging profile. The effectiveness of the proposed converter has been verified with the experimental results under an output voltage range of 250-420-V dc at 3.3 kW.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118 · cited 1×
“6 kW [4].”
An LLC Resonant DC–DC Converter for Wide Output Voltage Range Battery Charging Applications
Musavi, F., Craciun, M., Gautam, D. S., Eberle, W., & Dunford, W. G. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2241792 · Cited by 498 · cited 4×
“Among various battery charging algorithms for the battery in EVs, the constant-current (CC) and constant-voltage (CV) charging method is the most robust and effective, and thus is widely applied to the charger applications [5], [6].”
BackgroundInfluentialDesign Methodology of LLC Resonant Converters for Electric Vehicle Battery Chargers
Deng, J., Li, S., Hu, S., Mi, C. C., & Ma, R. (2014) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2287379 · Cited by 478 · cited 1×
“verters (SRCs) also experience the similar problem, because the switching frequency varies very widely for charging the battery in EVs [13]–[15].”
BackgroundWhitaker, B., Barkley, A., Cole, Z., Passmore, B., Martin, D., McNutt, T. R., Lostetter, A. B., Lee, J. S., & Shiozaki, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2279950 · Cited by 441
Design and Analysis of a Full-Bridge LLC-Based PEV Charger Optimized for Wide Battery Voltage Range
Wang, H., Dusmez, S., & Khaligh, A. (2014) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2288772 · Cited by 293
Wang, H., Dusmez, S., & Khaligh, A. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2311399 · Cited by 182 · cited 1×
“Among various battery charging algorithms for the battery in EVs, the constant-current (CC) and constant-voltage (CV) charging method is the most robust and effective, and thus is widely applied to the charger applications [5], [6].”
MethodGu, B., Lai, J.-S., Kees, N., & Zheng, C. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2210565 · Cited by 182 · cited 1×
“In general, the OBC consists of a power factor corrector and an isolated dc–dc converter that recharges directly the battery in EVs within the output voltage range of 250–420 V [1]–[3].”
BackgroundMishima, T., Akamatsu, K., & Nakaoka, M. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2258040 · Cited by 149
Ryu, S., Kim, D.-H., Kim, M., Kim, J.-S., & Lee, B. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2300036 · Cited by 148
Liu, C., Gu, B., Lai, J., Wang, M., Ji, Y., Cai, G., Zhao, Z. M., Chen, C.-L., Zheng, C., & Sun, P. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2205019 · Cited by 139 · cited 6×
“While the proposed converter has all the benefits of the hybrid converters presented in [16]–[18], the proposed converter achieves much better transformer utilization compared to the hybrid converter in [17].”
BackgroundMethodInfluential
Research works printed but not linked: 1
- kim, 2015, Integrated dual full-bridge converter with current-doubler rectifier for EV charger-accepted for published, IEEE Trans Power Electron
Cited by
Review of energy storage systems for electric vehicle applications: Issues and challenges
Hannan, M. A., Hoque, M. M., Mohamed, A., & Ayob, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.171 · Cited by 1,050
A Review of Bidirectional On-Board Chargers for Electric Vehicles
Yuan, J., Dorn-Gomba, L., Callegaro, A. D., Reimers, J., & Emadi, A. (2021) · IEEE Access · doi:10.1109/access.2021.3069448 · Cited by 390
“The on-board charger (OBC) provides the ability for EVs to be charged directly from the AC grid and is widely used in automotive industry for its convenience, especially compared to the high-cost and large-volume of off-board charging solutions [7]–[10].”
BackgroundRubino, L., Capasso, C., & Veneri, O. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.06.097 · Cited by 215
A Hierarchical Active Balancing Architecture for Lithium-Ion Batteries
Zhang, Z., Gui, H., Gu, D.-J., Yang, Y., & Ren, X. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2575844 · Cited by 181
“DUE to the limited voltage of individual lithium-ion battery cell, multiple cells have to be connected in series to meet the high voltage in the applications such as electric vehicles (EV) and energy storage units for renewable energy systems [1], [2].”
BackgroundLithium-Ion Battery Charge Equalization Algorithm for Electric Vehicle Applications
Hannan, M. A., Hoque, M. M., Peng, S. E., & Uddin, M. N. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2672674 · Cited by 174
Metadata
- Authors
- Lee, I.-O.
- Affiliations
- Keimyung University (KR)
- Corresponding author
- Lee, Il-Oun
- ORCID
- Lee, Il-Oun
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2016-05
- Volume
- 31
- Issue
- 5
- Pages
- 3639-3649
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2213978322
- Cited by
- 134
- References
- 18
- Citations by year
- 2026: 5 · 2025: 14 · 2024: 12 · 2023: 17 · 2022: 15 · 2021: 14 · 2020: 6 · 2019: 13 · 2018: 10 · 2017: 16 · 2016: 12
- FWCI
- 6.11
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Funders
- National Research Foundation of Korea (NRF) (NRF-2015R1C1A1A01051992)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- on-board charger, electric vehicle charging, pulse width modulation, resonant converter, Schottky diodes, diode voltage stress, transformer utilization, charging efficiency, DC-DC converter
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hybrid PWM-Resonant Converter for Electric Vehicle On-Board Battery Chargers. https://app.cochat.ai/papers/10.1109/tpel.2015.2456635
- The paper
- Lee, I.-O. (2016). Hybrid PWM-Resonant Converter for Electric Vehicle On-Board Battery Chargers. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2015.2456635
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.