Current Sensorless Power Balance Strategy for DC/DC Converters in a Cascaded Multilevel Converter Based Solid State Transformer
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This letter proposes a current sensorless controller for balancing the power in the dc/dc stage of a cascaded multilevel converter based solid state transformer. It is revealed that the equalization of the active power component of duty cycles in the cascaded multilevel rectifier stage can be a good indicator of power balance in the dc/dc stage. Additionally, the power balance of the dc/dc stage can guarantee the voltage balance in the rectifier stage if the differences among the power devices are negligible. Based on this principle, a novel power balance controller without sensing any current in the dc/dc stage is proposed. In the end, experimental results in a seven-level three-stage solid state transformer are provided for verifying the proposed method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Future Renewable Electric Energy Delivery and Management (FREEDM) System: The Energy Internet
Huang, A. Q., Crow, M. L., Heydt, G. T., Zheng, J. P., & Dale, S. J. (2011) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2081330 · Cited by 1,463 · cited 1×
“SOLID state transformer (SST) has been regarded as one of the most emerging technologies in the power distribution system [1]–[4].”
BackgroundSelf-citation
Cited by
Hou, N., & Li, Y. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2927930 · Cited by 553
Design and Demonstration of a 3.6-kV–120-V/10-kVA Solid-State Transformer for Smart Grid Application
She, X., Yu, X., Wang, F., & Huang, A. Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2293471 · Cited by 324
Self-citationResearch on Unbalanced-Load Correction Capability of Two Power Electronic Transformer Topologies
Wang, X., Liu, J., Ouyang, S., & Meng, F. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2331701 · Cited by 37
“[28] proposed a current sensorless power balance strategy for the dc–”
BackgroundItoh, J.-I., Aoyagi, K., & Nakanishi, T. (2017) · 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia) · doi:10.1109/ifeec.2017.7992060 · Cited by 3
Metadata
- Authors
- She, X., Huang, A. Q., & Ni, X.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2014-01
- Volume
- 29
- Issue
- 1
- Pages
- 17-22
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2071851764
- Cited by
- 119
- References
- 1
- FWCI
- 5.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.