Characterization of 6.5 kV IGBTs for High-Power Medium-Frequency Soft-Switched Applications
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Medium voltage high-power applications are usually realized using high voltage semiconductors (3.3 kV and above) operated in the hard switching mode with low switching frequencies (several hundreds of hertz). However, for high-power dc-dc converters employing a transformer for galvanic isolation, it is attractive to increase the switching frequency so that the transformer size can be reduced. An increase of the switching frequency implies an increase of the switching losses, and this has to be mitigated somehow, usually by choice of resonant topologies or soft switching techniques. Main focus of the paper is on the operation of the insulated gate bipolar transistor (IGBT) within a high-power dc-dc LLC resonant converter, in order to explore interactions between semiconductor and circuit properties, which both must be simultaneously considered in order to achieve the best utilization of a high voltage power semiconductor operating at higher switching frequencies. For these purposes, switching properties of a standard 6.5 kV IGBT are compared with switching properties of two different optimized versions of a 6.5 kV IGBT. Experimental results are included to support theoretical considerations and findings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Medium frequency topology in railway applications
Steiner, M., & Reinold, H. (2007) · 2007 European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417570 · Cited by 249
Cited by
Energy storage system: Current studies on batteries and power condition system
Zhang, C., Wei, Y.-L., Cao, P.-F., & Lin, M.-C. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.030 · Cited by 493
Power Electronic Traction Transformer—Medium Voltage Prototype
Zhao, C., Dujic, D., Mester, A., Steinke, J. K., Weiss, M., Lewdeni-Schmid, S., Chaudhuri, T., & Stefanutti, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2278960 · Cited by 478
Self-citationZheng, L., Han, X., An, Z., Kandula, R. P., Kandasamy, K., Saeedifard, M., & Divan, D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3066908 · Cited by 84
Novel insulation concept for an MV dry-cast medium-frequency transformer
Gradinger, T. B., Drofenik, U., & Alvarez, S. (2017) · 2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe) · doi:10.23919/epe17ecceeurope.2017.8099006 · Cited by 51
Metadata
- Authors
- Dujic, D., Steinke, G. K., Bellini, M., Rahimo, M., Storasta, L., & Steinke, J. K.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2014-02
- Volume
- 29
- Issue
- 2
- Pages
- 906-919
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W1996407463
- Cited by
- 75
- References
- 1
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization of 6.5 kV IGBTs for High-Power Medium-Frequency Soft-Switched Applications. https://app.cochat.ai/papers/10.1109/tpel.2013.2259264
- The paper
- Dujic, D., Steinke, G. K., Bellini, M., Rahimo, M., Storasta, L., & Steinke, J. K. (2014). Characterization of 6.5 kV IGBTs for High-Power Medium-Frequency Soft-Switched Applications. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2013.2259264
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.