The DOI matches its Crossref record; 19 of the 24 references it cites were found in a registry or an index.
Liquid Jet Impingement Cooling of a Silicon Carbide Power Conversion Module for Vehicle Applications
Abstract
Thermal management of power electronics is an extremely challenging problem in the harsh environment of military hybrid vehicles, where the local air and liquid coolant's temperature exceed 100 °C under regular operating conditions. This paper presents the development work of a high heat flux, jet impingement-cooled heat exchanger for a 600-V/50-A silicon carbide (SiC) power module (rated at 175 °C device junction temperature), used for bidirectional power conversion between a 28-V battery and a 300-V dc bus. A total of 50 volume% mixture of water-ethylene glycol (WEG) coolant at 100 °C inlet temperature is the only available coolant. An array of WEG coolant microjets impinges on the base plate of the SiC module. The jet impingement cooling system has been optimized by experimental studies on a surrogate module, along with a high-fidelity computational model, to accurately estimate the SiC device junction temperature in relevant operating conditions. Results indicate that at the design heat load of 151 W (worst-case scenario), the SiC device junction temperature is reduced from 290 °C with commercial-off-the-shelf (COTS) cold plate cooling and 215 °C with COTS microchannel heat exchanger cooling, to 169 °C with a jet impingement-cooled heat exchanger, using the same flow rate.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Jet impingement cooling uses high-speed jets from micro-nozzles to target hotspots, achieving high HTC; it is effective for thermally demanding devices such as GaN monolithic microwave integrated circuit (MMIC) power amplifiers [29,52-54].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [52]
In the citing paper
“• High pumping power required ( ∼ 5 × ) [52]”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [52]
In the citing paper
“• R th reduction: up to 64.3% (vs. indirect) [52]”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [52]
Citations
Cites
Single-Phase Liquid Jet Impingement Heat Transfer
Webb, B. W., & Ma, C.-F. (1995) · Advances in Heat Transfer · doi:10.1016/s0065-2717(08)70296-x · Cited by 434
The velocity of rise of single cylindrical air bubbles through liquids contained in vertical tubes
White, E. T., & Beardmore, R. H. (1962) · Chemical Engineering Science · doi:10.1016/0009-2509(62)80036-0 · Cited by 394
Liquid Cooling of Electronic Devices by Single-Phase Convection
Incropera, F. P. (1999) · Medical Entomology and Zoology · Cited by 225
Wolf, D. H., Incropera, F. P., & Viskanta, R. (1993) · Advances in Heat Transfer · doi:10.1016/s0065-2717(08)70005-4 · Cited by 201
Mertens, R. G., Chow, L. C., Sundaram, K. B., Cregger, R. B., Rini, D. P., Turek, L. J., & Saarloos, B. A. (2007) · Journal of Electronic Packaging · doi:10.1115/1.2753937 · Cited by 59
Performance Improvement of a Power Conversion Module by Liquid Micro-Jet Impingement Cooling
Bhunia, A., Chandrasekaran, S., & Chen, C.-L. (2007) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2007.898366 · Cited by 58
Self-citationIntegrated micro heat sink for power multichip module
Gillot, C., Schaeffer, C., & BRICARD, A. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.821819 · Cited by 49
Impingement-based high performance cooling configurations for automotive power converters
Parida, P. R., Ekkad, S. V., & Ngo, K. D. T. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.10.024 · Cited by 48
Shaw, M. C., Waldrop, J. R., Chandrasekaran, S., Kagalwala, B. A., Jing, X., Brown, E. R., Dhir, V., & Fabbeo, M. (2003) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2002.1012567 · Cited by 41
Cooling of an IGBT Drive System with Vaporizable Dielectric Fluid (VDF)
Howes, J. C., Levett, D. B., Wilson, S. T., Marsala, J., & Saums, D. L. (2008) · Annual IEEE Semiconductor Thermal Measurement and Management Symposium/Proceedings · doi:10.1109/stherm.2008.4509358 · Cited by 38
Research works printed but not linked: 2
- rohsenow, 1998, Natural convection, Handbook of Heat Transfer, 4.12
- mitic, 2002, Spray cooling of IGBT electronic power modules, Proc Int Conf Thermal Challenges Next Generat Electron Syst, 147
Cited by
Heat Management in Power Converters: From State of the Art to Future Ultrahigh Efficiency Systems
Laloya, E., Lucia, O., Sarnago, H., & Burdio, J. M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2513433 · Cited by 188
Next generation electric drives for HEV/EV propulsion systems: Technology, trends and challenges
López, I., Ibarra, E., Matallana, A., Andreu, J., & Kortabarria, I. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109336 · Cited by 179
Jones-Jackson, S., Rodriguez, R., & Emadi, A. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059558 · Cited by 131
Additive Manufacturing for Enhancing Thermal Dissipation in Heat Sink Implementation: A Review
Nafis, B. M., Whitt, R., Iradukunda, A.-C., & Huitink, D. R. (2020) · Heat Transfer Engineering · doi:10.1080/01457632.2020.1766246 · Cited by 118
High-Efficiency Polymer-Based Direct Multi-Jet Impingement Cooling Solution for High-Power Devices
Wei, T., Oprins, H., Cherman, V. O., Qian, J., Wolf, I. D., Beyne, E., & Baelmans, M. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2872904 · Cited by 98
Metadata
- Authors
- Gould, K., Cai, S. Q., Neft, C., & Bhunia, A.
- Affiliations
- Teledyne Technologies (United States) (US)
- ORCID
- Cai, Steve Q.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2015-06
- Volume
- 30
- Issue
- 6
- Pages
- 2975-2984
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2039385801
- Cited by
- 93
- References
- 24
- Citations by year
- 2026: 5 · 2025: 8 · 2024: 8 · 2023: 7 · 2022: 12 · 2021: 9 · 2020: 12 · 2019: 11 · 2018: 8 · 2017: 9 · 2016: 2 · 2015: 2
- FWCI
- 5.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Funders
- U.S. Army Tank and Automotive Research Development & Engineering Center (W56HZV-10-C-0114)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer Mechanisms
- Keywords
- silicon carbide power modules, power electronics thermal management, ethylene glycol-water coolant, junction temperature, bidirectional power conversion, hybrid electric vehicles, military vehicles, high heat flux cooling, heat exchanger design
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Liquid Jet Impingement Cooling of a Silicon Carbide Power Conversion Module for Vehicle Applications. https://app.cochat.ai/papers/10.1109/tpel.2014.2331562
- The paper
- Gould, K., Cai, S. Q., Neft, C., & Bhunia, A. (2015). Liquid Jet Impingement Cooling of a Silicon Carbide Power Conversion Module for Vehicle Applications. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2014.2331562
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.