New Measuring Technique for Reducing the Number of Voltage Sensors in Modular Multilevel Converters
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
This paper presents a new technique for measuring the capacitor voltages in a modular multilevel converter using a reduced number of voltage sensors. With this technique, the minimum number of voltage sensors per arm is two. Each sensor measures the output voltage of a set of submodules (SMs) connected in series and acquires a new measurement when there is only one SM activated within the set. The acquired value corresponds to the capacitor voltage of the activated SM minus the voltage drops produced in the switches. A simple mathematical model is used to estimate all the SM capacitor voltages, and it is then updated whenever there is a new measurement available. An algorithm that enforces the periodic update of the voltage measurements is also presented. The proposed measuring technique highly reduces the number of voltage sensors; hence reducing the complexity and costs of the signal conditioning and data acquisition stages. Simulation and experimental results are presented to demonstrate the efficiency of the proposed technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“A capacitor voltage measuring system with reduced number of sensors can be implemented, where the minimum number can be as low as two voltage sensors per arm [131].”
From Modular Multilevel Converters: Recent Achievements and Challenges (2021) · cites this paper as [131]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent Advances and Industrial Applications of Multilevel Converters
Kouro, S., Malinowski, M., Gopakumar, K., Pou, J., Franquelo, L. G., Wu, B., Rodriguez, J., Pérez, M. A., & Leon, J. I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049719 · Cited by 3,872
Self-citationAn innovative modular multilevel converter topology suitable for a wide power range
Lesnicar, A., & Marquardt, R. (2004) · 2003 IEEE Bologna Power Tech Conference Proceedings, · doi:10.1109/ptc.2003.1304403 · Cited by 2,908
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210
The age of multilevel converters arrives
Franquelo, L., Rodriguez, J., Leon, J., Kouro, S., Portillo, R., & Prats, M. (2008) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2008.923519 · Cited by 2,016
Control and Experiment of Pulsewidth-Modulated Modular Multilevel Converters
Hagiwara, M., & Akagi, H. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2014236 · Cited by 1,565
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387 · cited 2×
“ever, if a voltage balancing algorithm with controlled switching frequency is used [25], [26], only one SM is activated or deactivated per switching transition, achieving a constant switching”
MethodCircuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346 · cited 1×
“Among the multilevel converter topologies, the modular multilevel converter (MMC) [3]–[7] offers several salient fea-”
BackgroundDynamic Performance of a Modular Multilevel Back-to-Back HVDC System
Saeedifard, M., & Iravani, R. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2050787 · Cited by 1,188
A new modular voltage source inverter topology
Marquardt, R. (2003) · Medical Entomology and Zoology · Cited by 503
Design and Operation of a Hybrid Modular Multilevel Converter
Zeng, R., Xu, L., Yao, L., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2320822 · Cited by 455
Cited by
Modular Multilevel Converters: Recent Achievements and Challenges
Perez, M. A., Ceballos, S., Konstantinou, G., Pou, J., & Aguilera, R. P. (2021) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2021.3060791 · Cited by 327
Self-citationReliable Modular Multilevel Converter Fault Detection With Redundant Voltage Sensor
Picas, R., Zaragoza, J., Pou, J., & Ceballos, S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2526684 · Cited by 134
Self-citationAbushafa, O., Dahidah, M., Gadoue, S. M., & Atkinson, D. J. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2795519 · Cited by 102
Fault Diagnosis and Monitoring of Modular Multilevel Converter With Fast Response of Voltage Sensors
Zhang, J., Hu, X., Xu, S., Zhang, Y., & Chen, Z. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2928248 · Cited by 99
Li, Z., Ricardo Lizana, F., Sha, S., Yu, Z., Peterchev, A. V., & Goetz, S. M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2886147 · Cited by 77
Metadata
- Authors
- Picas, R., Zaragoza, J., Pou, J., Ceballos, S., & Balcells, J.
- Affiliations
- Universitat Politècnica de Catalunya (ES)
- UNSW Sydney (AU)
- Tecnalia (ES)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2016-01
- Volume
- 31
- Issue
- 1
- Pages
- 177-187
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2051322855
- Cited by
- 62
- References
- 27
- Citations by year
- 2026: 2 · 2025: 5 · 2024: 3 · 2023: 5 · 2022: 5 · 2021: 13 · 2020: 5 · 2019: 4 · 2018: 8 · 2017: 6 · 2016: 4
- FWCI
- 3.21
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (publishedVersion, other-oa)
- UPCommons institutional repository (Universitat Politècnica de Catalunya) (submittedVersion, cc-by-nc-nd)
- TECNALIA Publications (Fundación TECNALIA Research & Innovation) (submittedVersion, public-domain)
- RECERCAT (Consorci de Serveis Universitaris de Catalunya) (submittedVersion, public-domain)
- Funders
- Ministerio de Economía y Competitividad of Spain (ENE2012-36871-C02-00)
- European Union
- Consolider-Ingenio Program (CD2009-00046)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Keywords
- modular multilevel converter, submodules, mathematical model, signal conditioning
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: New Measuring Technique for Reducing the Number of Voltage Sensors in Modular Multilevel Converters. https://app.cochat.ai/papers/10.1109/tpel.2015.2412658
- The paper
- Picas, R., Zaragoza, J., Pou, J., Ceballos, S., & Balcells, J. (2016). New Measuring Technique for Reducing the Number of Voltage Sensors in Modular Multilevel Converters. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2015.2412658
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.