The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Interleaved High-Conversion-Ratio Bidirectional DC–DC Converter for Distributed Energy-Storage Systems—Circuit Generation, Analysis, and Design
Abstract
This paper presents a novel interleaved high-conversion-ratio bidirectional DC-DC converter based on switched capacitors and coupled inductors. Series-connected switched capacitor and inductor cells were used to increase the voltage conversion ratio, reduce voltage stresses on power switches, realize soft-charging/discharging of switched capacitors, and achieve autocurrent-sharing in parallel inductors. The interleaved structure combined with switched capacitors was adopted to reduce current ripple at the side having lower voltage, thus enabling applications that require high power levels. In this paper, we first review the status of high-voltage-ratio bidirectional dc-dc converters. Then, the evolution of the proposed extensible topologies and the steady-state operating principle under the inductor current continuous conduction mode is presented. Finally, the performance and features such as voltage gain, voltage and current stress, and the autocurrent-sharing mechanism that are realized by switched capacitors are verified; the optimal design of coupled-inductors, switched-capacitors, and the chip size of switches are given. A specific design of the driving circuit that facilitates actual applications is described. A 1-kW prototype converter, employing a hybrid configuration of SiC and Si mosfets, was constructed to verify the theoretical analysis, and achieved an optimal compromise between conversion efficiency and low cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Krismer, F., & Kolar, J. W. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025284 · Cited by 470
Cited by
Topologies and Control Schemes of Bidirectional DC–DC Power Converters: An Overview
Gorji, S. A., Sahebi, H. G., Ektesabi, M., & Rad, A. B. (2019) · IEEE Access · doi:10.1109/access.2019.2937239 · Cited by 439
A review of non-isolated bidirectional dc-dc converters for energy storage systems
Tytelmaier, K., Husev, O., Veligorskyi, O., & Yershov, R. (2016) · 2016 II International Young Scientists Forum on Applied Physics and Engineering (YSF) · doi:10.1109/ysf.2016.7753752 · Cited by 174
A Critical Review on Charging Technologies of Electric Vehicles
Shahjalal, M., Shams, T., Tasnim, M. N., Ahmed, M. R., Ahsan, M., & Haider, J. (2022) · Energies · doi:10.3390/en15218239 · Cited by 66
A novel high‐conversion‐ratio bidirectional three‐phase DC–DC converter
Wang, F., Wang, Y., Zhang, F., & Teng, C. (2019) · The Journal of Engineering · doi:10.1049/joe.2018.8782 · Cited by 14
Self-citation
Metadata
- Authors
- Wang, Y.-F., Xue, L.-K., Wang, C.-S., Wang, P., & Li, W.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2016-08
- Volume
- 31
- Issue
- 8
- Pages
- 5547-5561
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2295081357
- Cited by
- 168
- References
- 1
- FWCI
- 6.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Interleaved High-Conversion-Ratio Bidirectional DC–DC Converter for Distributed Energy-Storage Systems—Circuit Generation, Analysis, and Design. https://app.cochat.ai/papers/10.1109/tpel.2015.2496274
- The paper
- Wang, Y.-F., Xue, L.-K., Wang, C.-S., Wang, P., & Li, W. (2016). Interleaved High-Conversion-Ratio Bidirectional DC–DC Converter for Distributed Energy-Storage Systems—Circuit Generation, Analysis, and Design. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2015.2496274
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.