Comparative Analysis of Two-Coil and Three-Coil Structures for Wireless Power Transfer
The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Abstract
With the development of electric vehicles and consumer electronics, wireless power transfer (WPT) is becoming a popular technology. Recently, magnetic resonant coupling has been considered to be the most effective and attractive WPT approach, and the two-coil structure is the most widely used for magnetic resonant coupling. It has been recently reported that the system's energy efficiency can be improved by a three-coil structure. In this paper, the three-coil structure is compared with the two-coil structure based on circuit theory. Simplified circuit models of the two- and three-coil structures are proposed to give a more intuitive and comprehensive analysis of the energy efficiency differences between the two structures. With the simplified model, the condition for a three-coil structure obtaining higher energy efficiency over its two-coil counterpart is derived, and the analysis shows that the WPT system with higher energy efficiency within a wider range of loads can be achieved by properly designed three-coil systems. Additionally, it also shows that the three-coil system has the significant advantage of reducing the current stress and the electromagnetic field emission that is caused by misalignments. The theoretical analysis is confirmed by both simulation and experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wireless Power Transfer via Strongly Coupled Magnetic Resonances
Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J. D., Fisher, P., & Soljačić, M. (2007) · Science · doi:10.1126/science.1143254 · Cited by 5,576 · cited 1×
“The source coil (also called driving coil) and load coil in the fourcoil structure are the most widely used components to improve the power transfer capacity, because impedance matching can be achieved by tuning the parameters of these additional coils [21], [22].”
BackgroundWireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185 · cited 2×
“Because it is inefficient to convert power at frequencies above the MHz level using state-of-the art power electronics devices [1] and the power transfer distance will be significantly limited for low resonant frequencies, the switching frequency of our experimental system is selected to be 684 kHz.”
BackgroundSample, A. P., Meyer, D. A., & Smith, J. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046002 · Cited by 1,808
A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer
Hui, S. Y. R., Zhong, W., & Lee, C. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249670 · Cited by 1,465 · cited 1×
“2526780 but the overall energy efficiency of the impedance matching WPT system is limited to below 50% [9]–[11].”
BackgroundDevelopment of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Budhia, M., Boys, J. T., Covic, G. A., & Huang, C.-Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179274 · Cited by 1,273 · cited 1×
“It also can be used to evaluate alternative compensation networks for new WPT systems as in [43] and [44].”
Covic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power Transfer
Li, S., Li, W., Deng, J., Nguyen, T. D., & Mi, C. C. (2015) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2014.2347006 · Cited by 1,091
Li, H., Li, J., Wang, K., Chen, W., & Yang, X. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2349534 · Cited by 592
Design and Optimization of a 3-Coil Inductive Link for Efficient Wireless Power Transmission
Kiani, M., Jow, U.-M., & Ghovanloo, M. (2011) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2011.2158431 · Cited by 591 · cited 1×
“has been given in [28].”
Imura, T., & Hori, Y. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2112317 · Cited by 581
Beh, T. C., Kato, M., Imura, T., Oh, S., & Hori, Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2206337 · Cited by 502 · cited 1×
“Relays are designed to select capacitors and/or coils to be connected to the resonant circuits to improve the energy efficiency against system parameter variations [16]–[18].”
BackgroundAn Adaptive Impedance-Matching Network Based on a Novel Capacitor Matrix for Wireless Power Transfer
Lim, Y., Tang, H., Lim, S., & Park, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2292596 · Cited by 484
Maximum Energy Efficiency Tracking for Wireless Power Transfer Systems
Zhong, W. X., & Hui, S. Y. R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2351496 · Cited by 476 · cited 1×
“Maximum energy efficiency tracking is realized by adjusting the input voltage or/and the output voltage using power converters [12]–[15].”
MethodThe Circuit Theory Behind Coupled-Mode Magnetic Resonance-Based Wireless Power Transmission
Kiani, M., & Ghovanloo, M. (2012) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2011.2180446 · Cited by 421 · cited 1×
“For midrange coupling conditions, it has been proven that both coupled-mode theory and circuit theory basically result in the same set of equations in the steady state and that either method can be applied [35]–[37].”
MethodCircuit-Model-Based Analysis of a Wireless Energy-Transfer System via Coupled Magnetic Resonances
Cheon, S., Kim, Y.-H., Kang, S.-Y., Lee, M. L., Lee, J.-M., & Zyung, T. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072893 · Cited by 395 · cited 1×
“For midrange coupling conditions, it has been proven that both coupled-mode theory and circuit theory basically result in the same set of equations in the steady state and that either method can be applied [35]–[37].”
MethodGeneral Analysis on the Use of Tesla's Resonators in Domino Forms for Wireless Power Transfer
Zhong, W., Lee, C. K., & Hui, S. Y. R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2171176 · Cited by 362
A Study on Magnetic Field Repeater in Wireless Power Transfer
Ahn, D., & Hong, S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188254 · Cited by 351
Circuit Model Based Analysis of a Wireless Energy Transfer System via Coupled Magnetic Resonances
Cheon, S.-H., Kim, Y.-H., Lee, M.-L., & Kang, S.-Y. (2011) · The Transactions of the Korean Institute of Power Electronics · doi:10.6113/tkpe.2011.16.2.137 · Cited by 337
Li, W., Zhao, H., Li, S., Deng, J., Kan, T., & Mi, C. C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2384003 · Cited by 331
Analysis and Tracking of Optimal Load in Wireless Power Transfer Systems
Fu, M., Yin, H., Zhu, X., & Ma, C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2347071 · Cited by 330
Effects of Magnetic Coupling of Nonadjacent Resonators on Wireless Power Domino-Resonator Systems
Lee, C. K., Zhong, W. X., & Hui, S. Y. R. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2169460 · Cited by 309 · cited 1×
“It has been reported that the cross-coupling effects of nonadjacent resonators would cause the maximum efficiency operation to shift away slightly from the resonance frequency in domino-resonator systems [24], and the source coil could induce a bifurcation phenomenon in the three-coil system [30]; therefore, if M02 ca…”
BackgroundA Study of Loosely Coupled Coils for Wireless Power Transfer
Chen, C.-J., Chu, T.-H., Lin, C.-L., & Jou, Z.-C. (2010) · IEEE Transactions on Circuits and Systems II: Express Briefs · doi:10.1109/tcsii.2010.2048403 · Cited by 306 · cited 1×
“The source coil (also called driving coil) and load coil in the fourcoil structure are the most widely used components to improve the power transfer capacity, because impedance matching can be achieved by tuning the parameters of these additional coils [21], [22].”
BackgroundMoon, S., Kim, B.-C., Cho, S.-Y., Ahn, C.-H., & Moon, G.-W. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301762 · Cited by 251
Compact and Efficient Bipolar Coupler for Wireless Power Chargers: Design and Analysis
Deng, J., Li, W., Nguyen, T. D., Li, S., & Mi, C. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2417115 · Cited by 237
A review on inductive charging for electric vehicles
Wu, H. H., Gilchrist, A., Sealy, K., Israelsen, P., & Muhs, J. (2011) · 2011 IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2011.5994820 · Cited by 231 · cited 1×
“W ITH the advantages of safety and convenience, wireless power transfer (WPT) technology shows great potential for applications in electric vehicles [1]–[6] and consumer electronics [7], [8].”
BackgroundYan, Z., Li, Y., Zhang, C., & Yang, Q. (2014) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2291861 · Cited by 226 · cited 1×
“Coil misalignments is likely unavoidable and, therefore, the efficiency and transfer power impact of the misalignment has been theoretically analyzed and experimentally tested [33], [39]–[42].”
BackgroundRelay Effect of Wireless Power Transfer Using Strongly Coupled Magnetic Resonances
Zhang, F., Hackworth, S. A., Fu, W., Li, C., Mao, Z., & Sun, M. (2011) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2010.2087010 · Cited by 197 · cited 1×
“With the relay resonators (also referred to as domino resonator, intermediate coils, or repeater) placed at optimum positions, the overall WPT distance and energy efficiency can be substantially increased [23]–[27].”
BackgroundKurschner, D., Rathge, C., & Jumar, U. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2181134 · Cited by 149 · cited 3×
“In addition to the energy efficiency optimization, the design of the WPT system also requires consideration of the tolerances of system parameter variations, the load variations, and the misalignment and electromagnetic field (EMF) emission [33], [34].”
BackgroundMethodImproving Power Transfer Efficiency of a Short-Range Telemetry System Using Compact Metamaterials
Rajagopalan, A., RamRakhyani, A. K., Schurig, D., & Lazzi, G. (2014) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2014.2304927 · Cited by 122 · cited 1×
“With the relay resonators (also referred to as domino resonator, intermediate coils, or repeater) placed at optimum positions, the overall WPT distance and energy efficiency can be substantially increased [23]–[27].”
BackgroundNguyen, M. Q., Hughes, Z., Woods, P., Seo, Y.-S., Rao, S., & Chiao, J. ‐. (2014) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2014.2302738 · Cited by 119
Dang, Z., & Qahouq, J. A. A. (2014) · IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2014.6803477 · Cited by 50
Design of Self-Matched Planar Loop Resonators for Wireless Nonradiative Power Transfer
Tierney, B. B., & Grbic, A. (2014) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2014.2303940 · Cited by 20 · cited 1×
“By tuning the operating frequency, the power transfer capacity can be maximized in the over-coupled region to reduce the influence of the frequency splitting phenomena [19], [20].”
BackgroundA study of three-coil magnetically coupled resonators for wireless power transfer
Zhang, J. A., Yuan, X., & Wang, C. (2015) · IEEE International Wireless Symposium · doi:10.1109/ieee-iws.2015.7164536 · Cited by 8 · cited 3×
“Additionally, in [29], limited by the mechanical structure, the distance between the source coil and transmitter coil cannot be reduced to small values, but a strong coupling of the source coil and transmitter coil is found to be a very important operating condition for the three-coil structures.”
BackgroundSelf-citation
Cited by
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
Metadata
- Authors
- Zhang, J., Yuan, X., Wang, C., & He, Y.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-01
- Volume
- 32
- Issue
- 1
- Pages
- 341-352
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2344831607
- Cited by
- 186
- References
- 33
- FWCI
- 8.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.