The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Tripolar Pad for Inductive Power Transfer Systems for EV Charging
Open accessAbstract
A recently proposed magnetic structure called Tripolar Pad (TPP) is investigated as a primary pad in an inductive power transfer battery charging system for electric vehicles. In this paper, a TPP primary is evaluated for 3.3 kW power transfer to both a circular pad and a bipolar pad as secondary pads. A mathematical model is presented to describe the power transfer from the TPP primary to the secondary pads then a control scheme is proposed which exploits the mutual decoupling between the TPP coils to find optimal primary currents. The optimization of the primary currents in the TPP improved the effective coupling factor over traditional topologies, particularly when the secondary was misaligned, and maintained leakage magnetic flux below International Commission on Non-Ionizing Radiation Protection guidelines. The result for the proposed TPP is validated with practical measurements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
GUIDELINES FOR LIMITING EXPOSURE TO TIME-VARYING ELECTRIC AND MAGNETIC FIELDS (1 Hz TO 100 kHz)
(2010) · Health Physics · doi:10.1097/hp.0b013e3181f06c86 · Cited by 2,164
A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer
Hui, S. Y. R., Zhong, W., & Lee, C. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249670 · Cited by 1,465
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Self-citationLin, J., Saunders, R. A., Schulmeister, K., Söderberg, P. G., Stuck, B. E., Swerdlow, A. J., Taki, M., Veyret, B., Ziegelberger, G., Repacholi, M. H., et al. (2010) · HAL · Cited by 1,261
Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Self-citationAdvances in Wireless Power Transfer Systems for Roadway-Powered Electric Vehicles
Choi, S. Y., Gu, B. W., Jeong, S. Y., & Rim, C. T. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2343674 · Cited by 682
Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles
Huh, J., Lee, S. W., Lee, W. Y., Cho, G. H., & Rim, C. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160972 · Cited by 669
Zaheer, A., Hao, H., Covic, G. A., & Kacprzak, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2329693 · Cited by 371
Self-citationChoi, B., Nho, J., Cha, H., Ahn, T., & Choi, S. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822039 · Cited by 237
Multiphase Pickups for Large Lateral Tolerance Contactless Power-Transfer Systems
Elliott, G., Raabe, S., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031184 · Cited by 234
Self-citationDevelopment and evaluation of single sided flux couplers for contactless electric vehicle charging
Budhia, M., Covic, G. A., Boys, J. T., & Huang, C.-Y. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6063826 · Cited by 232
Self-citationA bipolar primary pad topology for EV stationary charging and highway power by inductive coupling
Covic, G. A., Kissin, M. L. G., Kacprzak, D., Clausen, N., & Hao, H. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6064008 · Cited by 197
Self-citationUltraslim S-Type Power Supply Rails for Roadway-Powered Electric Vehicles
Choi, S. Y., Jeong, S. Y., Gu, B. W., Lim, G. C., & Rim, C. T. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2444894 · Cited by 175
Study on intelligent battery charging using inductive transmission of power and information
Hirai, J., Kim, T.-W., & Kawamura, A. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838106 · Cited by 172
Lumped Track Layout Design for Dynamic Wireless Charging of Electric Vehicles
Buja, G., Bertoluzzo, M., & Dashora, H. K. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2538738 · Cited by 144
Moon, S., & Moon, G. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2506779 · Cited by 142
Large air-gap coupler for inductive charger [for electric vehicles]
Sakamoto, H., Harada, K., Washimiya, S., Takehara, K., Matsuo, Y., & Nakao, F. (1999) · IEEE Transactions on Magnetics · doi:10.1109/20.800578 · Cited by 133
Evaluation of Magnetic Pad Sizes and Topologies for Electric Vehicle Charging
Lin, F. J., Covic, G. A., & Boys, J. T. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2419592 · Cited by 129
Self-citationInductive coupler for contactless power transmission
Sergeant, P., & den Bossche, A. V. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070059 · Cited by 122
Practical Design Considerations for Contactless Power Transfer Quadrature Pick-Ups
Raabe, S., & Covic, G. A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165461 · Cited by 110
Self-citationModel for a Three-Phase Contactless Power Transfer System
Matsumoto, H., Neba, Y., Ishizaka, K., & Itoh, R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2124472 · Cited by 109
Trifoliate Three-Phase Contactless Power Transformer in Case of Winding-Alignment
Matsumoto, H., Neba, Y., Iura, H., Tsutsumi, D., Ishizaka, K., & Itoh, R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2242421 · Cited by 63
Budhia, M., Covic, G. A., & Boys, J. T. (2010) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2010.5728981 · Cited by 54
Self-citationAnalysis on Tripolar Pad for Inductive Power Transfer systems
Kim, S., Covic, G. A., & Boys, J. T. (2016) · IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer · doi:10.1109/wow.2016.7772059 · Cited by 24
Self-citationProposal and Verification of Two-Layer Three-Phase Contactless Power Transformer
Matsumoto, H., Nakashima, R., Neba, Y., & Asahara, H. (2015) · IEEJ Transactions on Industry Applications · doi:10.1541/ieejias.135.539 · Cited by 14
Cited by
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Wireless Laser Power Transmission: A Review of Recent Progress
Jin, K., & Zhou, W. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2853156 · Cited by 308
A critical review on wireless charging for electric vehicles
Machura, P., & Li, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.027 · Cited by 295
Metadata
- Authors
- Kim, S., Covic, G. A., & Boys, J. T.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-07
- Volume
- 32
- Issue
- 7
- Pages
- 5045-5057
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2508845814
- Cited by
- 312
- References
- 25
- FWCI
- 8.84
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.