Optimized Design of Full-Bridge Modular Multilevel Converter With Low Energy Storage Requirements for HVdc Transmission System
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Modular multilevel converter (MMC) is a well-proved circuit topology in voltage-source converter-based high voltage direct current (VSC-HVdc) transmission systems. As is known, the conventional half-bridge submodule (HBSM)-based MMC-HVdc is not suitable for overhead line transmission applications. In addition, high energy storage requirements, i.e., large capacitance is inevitable. The conventional design of the full-bridge submodule (FBSM)-based MMC usually does not utilize the negative voltage state of FBSM in normal operation. Considering the same dc voltage as with the HBSM case and utilizing the negative voltage state of the FBSM, this paper presents the design method of the power transmission capability of a single FBSM. Meanwhile, an optimized energy storage capacitance design method of the FBSM is proposed. With this method, the capacitance of FBSM can be reduced significantly. The correctness and effectiveness of the proposed method is verified by the simulation of a ±160 kV VSC-HVdc MMC and the comparison results of the dc short fault blocking and ride through capability are also provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modular Multilevel Converters for HVDC Applications: Review on Converter Cells and Functionalities
Nami, A., Liang, J., Dijkhuizen, F., & Demetriades, G. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2327641 · Cited by 1,042
Gnanarathna, U. N., Gole, A. M., & Jayasinghe, R. P. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2060737 · Cited by 739
Design and Operation of a Hybrid Modular Multilevel Converter
Zeng, R., Xu, L., Yao, L., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2320822 · Cited by 455
Modular Multilevel Converter topologies with DC-Short circuit current limitation
Marquardt, R. (2011) · 8th International Conference on Power Electronics - ECCE Asia · doi:10.1109/icpe.2011.5944451 · Cited by 413 · cited 1×
“In [18], a new submodule provided in Fig.”
BackgroundPou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336608 · Cited by 406 · cited 1×
“In addition, authors in [28] and [29] provided a strategy by circulating current injection in order to minimize”
BackgroundIlves, K., Antonopoulos, A., Harnefors, L., Norrga, S., Angquist, L., & Nee, H.-P. (2011) · IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2011.6120033 · Cited by 112
Cited by
Optimized Design and Control for Hybrid MMC With Reduced Capacitance Requirements
Dong, P., Lyu, J., & Cai, X. (2018) · IEEE Access · doi:10.1109/access.2018.2869400 · Cited by 37
Xu, S., Song, Q., Zhou, Y., Meng, J., Yang, W., Zhao, B., & Zeng, R. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2958495 · Cited by 33
Zhao, C., Lei, M., Hu, Y., Li, Z., Gao, F., Wang, P., & Li, Y. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2877088 · Cited by 32
Self-citation
Metadata
- Authors
- Zhao, C., Li, Y., Li, Z., Wang, P., Ma, X., & Luo, Y.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2018-01
- Volume
- 33
- Issue
- 1
- Pages
- 97-109
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2581668132
- Cited by
- 96
- References
- 6
- FWCI
- 6.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.