The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Current Sensor Fault Diagnosis and Tolerant Control for VSI-Based Induction Motor Drives
Abstract
Fault-tolerant control is attracting more interests due to its capability of increasing the reliability of voltage source inverters (VSI). Fault detection, localization, and tolerant control schemes of current sensor are presented for high-fault-tolerance induction motor drives. Generally, three-phase current sensors are used in high-power inverters; nevertheless, failure of current sensors degrades the performance and reliability and even leads to the breakdown of the vector control system due to the fact that flux angle cannot be estimated correctly. The proposed scheme integrates three independent observers, taking a-phase current, b-phase current, and c-phase current as inputs, respectively. The observers are capable of online monitoring the state of current sensors under normal operation. Furthermore, after one or even two current sensors getting faulty, the observers can detect and localize the faults and switch the system to tolerant vector control mode even with only one healthy phase current sensor available. Hence, it is very attractive in some safety crucial applications. Stability and convergence of the observer are analytically derived and verified. A dSpace-based 1.1-kW induction motor variable-speed system is set up for the experiment, and experimental results demonstrate the validity of the proposed algorithm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
A New Approach for Current Sensor Fault Diagnosis in PMSG Drives for Wind Energy Conversion Systems
Freire, N. M. A., Estima, J. O., & Cardoso, A. J. M. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2271992 · Cited by 115
Khojet El Khil, S., Jlassi, I., Estima, J. O., Mrabet‐Bellaaj, N., & Marques Cardoso, A. J. (2016) · Electronics Letters · doi:10.1049/el.2016.2198 · Cited by 58
Cited by
Wang, X., Wang, Z., Xu, Z., Cheng, M., Wang, W., & Hu, Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2876400 · Cited by 263
Diagnosis of Open-Switch and Current Sensor Faults in PMSM Drives Through Stator Current Analysis
Khojet El Khil, S., Jlassi, I., Marques Cardoso, A. J., Estima, J. O., & Mrabet-Bellaaj, N. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2930592 · Cited by 147
Metadata
- Authors
- Yu, Y., Zhao, Y., Wang, B., Huang, X., & Xu, D.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2018-05
- Volume
- 33
- Issue
- 5
- Pages
- 4238-4248
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2621628992
- Cited by
- 189
- References
- 3
- FWCI
- 6.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.