The DOI matches its Crossref record.
Dual-Purpose Nonoverlapping Coil Sets as Metal Object and Vehicle Position Detections for Wireless Stationary EV Chargers
Abstract
For commercialization of wireless stationary electric vehicles (EV) chargers, metal object detection (MOD) on a power supply coil and detection of position (DoP) of EVs are needed. In this paper, dual-purpose nonoverlapping coil sets for both MOD and DoP, which detect a variation of magnetic flux on the power supply coil, are newly proposed, where the proposed MOD and DoP methods make no contribution to any power losses. The existence of metal objects on the power supply coil is determined by an induced voltage difference of the nonoverlapping coil sets, whereas the position of the EV is determined by an induced voltage of the nonoverlapping coil sets. A sensing circuit, which has a variable resistor that is different from the conventional overlapping coil for MOD, can make the induced voltage difference zero even when the magnetic flux distribution is distorted by moving the pick-up coil. The proposed nonoverlapping coil sets with the sensing circuit have been demonstrated by simulations and experiments. When metallic coins and aluminum sheets are located on the power supply coil, the induced voltage difference of the coil sets, which is ideally zero without metal objects, significantly increases to 62.8 and 450 mV, respectively, which is more than ten times the value without metal objects throughout experiments. In addition, when the pick-up coil approaches the power supply coil, induced voltage of each coil set increased roughly 1.6 times at 10 cm air gap.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
A critical review on wireless charging for electric vehicles
Machura, P., & Li, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.027 · Cited by 295
Niu, S., Zhao, Q., Chen, H., Niu, S., & Jian, L. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2023.3292870 · Cited by 31
Niu, S., Niu, S., Zhang, C., & Jian, L. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3150114 · Cited by 28
Metadata
- Authors
- Jeong, S. Y., Kwak, H. G., Jang, G. C., Choi, S. Y., & Rim, C. T.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2018-09
- Volume
- 33
- Issue
- 9
- Pages
- 7387-7397
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2766028707
- Cited by
- 176
- References
- 0
- FWCI
- 6.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dual-Purpose Nonoverlapping Coil Sets as Metal Object and Vehicle Position Detections for Wireless Stationary EV Chargers. https://app.cochat.ai/papers/10.1109/tpel.2017.2765521
- The paper
- Jeong, S. Y., Kwak, H. G., Jang, G. C., Choi, S. Y., & Rim, C. T. (2018). Dual-Purpose Nonoverlapping Coil Sets as Metal Object and Vehicle Position Detections for Wireless Stationary EV Chargers. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2017.2765521
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.