High Step-Up Quasi-Z Source DC–DC Converter
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In this paper, a high step-up quasi-Z Source (QZS) dc-dc converter is proposed. This converter uses a hybrid switched-capacitors switched-inductor method in order to achieve high voltage gains. The proposed converter have resolved the voltage gain limitation of the basic QZS dc-dc converter while keeping its main advantages, such as continuous input current and low voltage stress on capacitors. Compared to the basic converter, the duty cycle is not limited, and the voltage stress on the diodes and switch is not increased. In addition to these features, the proposed converter has a flexible structure, and extra stages could be added to it in order to achieve even higher voltage gains without increasing the voltage stress on devices or limiting the duty cycle. The operation principle of the converter and related relationships and waveforms are presented in the paper. Also, a comprehensive comparison between the proposed and other QZS based dc-dc converters is provided which confirms the superiority of the proposed converter. Simulations are done in power systems computer aided design (PSCAD) in order to investigate the maximum power point tracking (MPPT) capability of the converter. In addition, the valid performance and practicality of the converter are studied through the results obtained from the laboratory built prototype.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of galvanically isolated impedance-source DC-DC converters
Chub, A., Vinnikov, D., Blaabjerg, F., & Peng, F. Z. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2453128 · Cited by 243
Flores Cortez, D., Waltrich, G., Fraigneaud, J., Miranda, H., & Barbi, I. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2350454 · Cited by 101 · cited 1×
“Generally, there are four different methods which have been proposed in order to increase the voltage gain of n-TCIB converters using: one-diodecapacitor-inductor units [12], two-switched-inductor units [13], three-switched-capacitor units [14], and four-hybrid switchedcapacitors switched-inductors units [15].”
Method
Cited by
Wang, J., Wang, B., Zhang, L., Wang, J., Shchurov, N. I., & Malozyomov, B. V. (2022) · Green Energy and Intelligent Transportation · doi:10.1016/j.geits.2022.100010 · Cited by 153
Wu, X., Wang, J., Zhang, Y., Du, J., Liu, Z., & Chen, Y. (2021) · Automotive Innovation · doi:10.1007/s42154-021-00163-z · Cited by 42
Sadeghpour, D., & Bauman, J. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3109505 · Cited by 37
Metadata
- Authors
- Haji-Esmaeili, M. M., Babaei, E., & Sabahi, M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2018-12
- Volume
- 33
- Issue
- 12
- Pages
- 10563-10571
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2794359905
- Cited by
- 226
- References
- 2
- FWCI
- 7.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High Step-Up Quasi-Z Source DC–DC Converter. https://app.cochat.ai/papers/10.1109/tpel.2018.2810884
- The paper
- Haji-Esmaeili, M. M., Babaei, E., & Sabahi, M. (2018). High Step-Up Quasi-Z Source DC–DC Converter. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2018.2810884
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.