CoChat

Review of DC-DC Converter Topologies Based on Impedance Network with Wide Input Voltage Range and High Gain for Fuel Cell Vehicles

Open access

The DOI matches its Crossref record; 117 of the 119 references it cites were found in a registry or an index.

Abstract

The development of fuel cell vehicles (FCVs) has a major impact on improving air quality and reducing other fossil-fuel-related problems. DC-DC boost converters with wide input voltage ranges and high gains are essential to fuel cells and DC buses in the powertrains of FCVs, helping to improve the low voltage of fuel cells and “soft” output characteristics. To build DC-DC converters with the desired performance, their topologies have been widely investigated and optimized. Aiming to obtain the optimal design of wide input range and high-gain DC-DC boost converter topologies for FCVs, a review of the research status of DC-DC boost converters based on an impedance network is presented. Additionally, an evaluation system for DC-DC topologies for FCVs is constructed, providing a reference for designing wide input range and high-gain boost converters. The evaluation system uses eight indexes to comprehensively evaluate the performance of DC-DC boost converters for FCVs. On this basis, issues about DC-DC converters for FCVs are discussed, and future research directions are proposed. The main future research directions of DC-DC converter for FCVs include utilizing a DC-DC converter to realize online monitoring of the water content in FCs and designing buck-boost DC-DC converters suitable for high-power commercial FCVs.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s42154-021-00163-z

Cites

117 of 117 references verified0 citation errors · 0 not checkable

Statistics

Figures

Image 1
CC-BY · From the PDF
Fig.2 Relationships among Capacitor + Capacitor topologies
Fig.2 Relationships among Capacitor + Capacitor topologiesCC-BY · From the PDF
Fig.3 Novel topologies based on impedance network
Fig.3 Novel topologies based on impedance networkCC-BY · From the PDF
Fig.4 Two types of SI structures
Fig.4 Two types of SI structuresCC-BY · From the PDF
Fig.5 Two-phase interleaved step-up structure
Fig.5 Two-phase interleaved step-up structureCC-BY · From the PDF
Fig.6 Structure of an SI combined with a charge pump
Fig.6 Structure of an SI combined with a charge pumpCC-BY · From the PDF
Fig.7 Quadratic boost structure
Fig.7 Quadratic boost structureCC-BY · From the PDF
Fig.8 Two types of SC structures
Fig.8 Two types of SC structuresCC-BY · From the PDF
Image 9
CC-BY · From the PDF
Fig.10 Modified VM
Fig.10 Modified VMCC-BY · From the PDF
Fig.11 Z-source structure
Fig.11 Z-source structureCC-BY · From the PDF
Fig.12 Quasi-Z-source structure
Fig.12 Quasi-Z-source structureCC-BY · From the PDF
Fig.13 TL structure
Fig.13 TL structureCC-BY · From the PDF
Image 14
CC-BY · From the PDF
Fig.15 Schematic of hybrid structure construction
Fig.15 Schematic of hybrid structure constructionCC-BY · From the PDF
Fig. 16 Schematic of cascaded structure construction
Fig. 16 Schematic of cascaded structure constructionCC-BY · From the PDF
Image 17
CC-BY · From the PDF
Fig.18 Distribution of indexes of typical novel topologies
Fig.18 Distribution of indexes of typical novel topologiesCC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 117 references

Research works printed but not linked: 5

  1. James, R., Andrew, D.: Fuel cell system: principle, design and application. Science Press, Beijing (2006)
  2. Ouyang, M., Li, J., Yang, F., Lu, L.: Automotive new powertrain: systems, models and controls. Tsinghua University Press, Beijing (2008)
  3. Chen, Z., Xu, J., Wu, J., He, M.: High voltage gain zero-ripple non-isolated converters with a coupled-inductor. Proc. CSEE. 34(33), 5836-5845 (2014)
  4. Chen, Z., Xu, J., Wu, J., Qiu, H.: High voltage gain boost converter based on coupled-inductor voltage-doubler cell and LC snubber circuit. Trans. China Electrotechnical Soc. 31(2), 78-85 (2016)
  5. Zhou, X., Ma, H., Gao, D.: Performances of DC-DC converter for fuel cell vehicle based on SiC and Si device. J. Automot. Saf. Energy. 8(1), 79-86 (2017)

Cited by

See all 42

Metadata

Authors
Wu, X., Wang, J., Zhang, Y., Du, J., Liu, Z., & Chen, Y.
Affiliations
  • Harbin University of Science and Technology (CN)
  • Tianjin University (CN)
  • Tsinghua University (CN)
Corresponding author
Wu, Xiaogang
Venue
Automotive Innovation
Published
2021-10-19
Volume
4
Issue
4
Pages
351-372
ISSN
  • 2096-4250 (ISSN-L)
  • 2522-8765
OpenAlex
W3207204721
Cited by
42
References
119
Citations by year
2026: 4 · 2025: 9 · 2024: 15 · 2023: 9 · 2022: 4 · 2021: 1
FWCI
2.13
Type
journal article
Language
en
Open access
Licence
Locations
Automotive Innovation (publishedVersion, cc-by)
Funders
international science and technology cooperation programme (2019YFE0100200)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
  • Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
Keywords
boost converter, fuel cell vehicles, impedance network, wide input voltage range, high gain, converter topology, buck-boost converter, DC bus

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Review of DC-DC Converter Topologies Based on Impedance Network with Wide Input Voltage Range and High Gain for Fuel Cell Vehicles. https://app.cochat.ai/papers/10.1007/s42154-021-00163-z
The paper
Wu, X., Wang, J., Zhang, Y., Du, J., Liu, Z., & Chen, Y. (2021). Review of DC-DC Converter Topologies Based on Impedance Network with Wide Input Voltage Range and High Gain for Fuel Cell Vehicles. Automotive Innovation. https://doi.org/10.1007/s42154-021-00163-z

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.