Selection Methodology for Si Power MOSFETs Used to Enhance SiC Power MOSFET Short-Circuit Capability With the BaSIC(EMM) Topology
The DOI matches its Crossref record; 11 of the 13 references it cites were found in a registry or an index.
Abstract
The BaSIC(EMM) topology has been previously demonstrated to improve the short-circuit (SC) capability of 1.2-kV SiC power MOSFETs from 3.5 to 7.4 μs while producing a 17% increase in the net on-state resistance. However, a SC time of 10 μs could not be achieved. In this article, a systematic procedure for selection of the Si power MOSFET used in the BaSIC(EMM) topology is described based on information published by manufacturers of Si power MOSFETs in their datasheets. A tradeoff curve between the Si EMM drain saturation current at 150 °C versus its on-resistance at 25 °C is proposed in this article for determination of the best Si EMM product. The proposed methodology allowed identification of a superior Si EMM device. It was experimentally validated that a SC with-stand time of 11 μs, under a gate bias of 20 V applied to the 1.2-kV SiC power MOSFET at a drain bias of 800 V, was achievable with an increase in on-resistance of only 3.6%. These experimental results demonstrate a greatly improved tradeoff curve between SC time and increase in on-resistance.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This approach, the Baliga short-circuit improvement concept (BaSIC), improves device performance with respect to the single-source resistance approach [57], [58].”
From Review and Outlook on GaN and SiC Power Devices: Industrial State-of-the-Art, Applications, and Perspectives (2024) · cites this paper as [58]
Citations
Cites
Fundamentals of Power Semiconductor Devices
Baliga, B. J. (2008) · Springer eBooks · doi:10.1007/978-0-387-47314-7 · Cited by 2,174
Self-citationFundamentals of Power Semiconductor Devices
Baliga, B. J. (2019) · Springer eBooks · doi:10.1007/978-3-319-93988-9 · Cited by 473
Self-citationPerformance Evaluation of High-Power SiC MOSFET Modules in Comparison to Si IGBT Modules
Zhang, L., Yuan, X., Wu, X., Shi, C., Zhang, J., & Zhang, Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2834345 · Cited by 446 · cited 1×
“Power losses in the inverters can be significantly reduced by replacing Si IGBTs with SiC power MOSFETs [1], [2].”
BackgroundNew Short Circuit Failure Mechanism for 1.2kV 4H-SiC MOSFETs and JBSFETs
Han, K., Kanale, A., Baliga, B. J., Ballard, B., Morgan, A., & Hopkins, D. C. (2018) · 2018 IEEE 6th Workshop on Wide Bandgap Power Devices and Applications (WiPDA) · doi:10.1109/wipda.2018.8569178 · Cited by 35
Self-citationDesign and fabrication of 3.3kV SiC MOSFETs for industrial applications
Huang, X., Fursin, L., Bhalla, A., Simon, W., & Dries, J. C. (2017) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.23919/ispsd.2017.7988908 · Cited by 29
A New User-Configurable Method to Improve Short-Circuit Ruggedness of 1.2-kV SiC Power MOSFETs
Kanale, A., & Baliga, B. J. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3010154 · Cited by 27 · cited 7×
“This can be accomplished for SiC power MOSFETs by either reducing the gate drive voltage [7] or by making changes to the device structure [8].”
BackgroundMethodSelf-citationKanale, A., & Baliga, B. J. (2019) · IEEE International Conference on Power Electronics and Drive Systems (PEDS) · doi:10.1109/peds44367.2019.8998921 · Cited by 23 · cited 3×
“Experimental validation of this idea has been demonstrated by placement of a gate-source-shorted Si depletion-mode power MOSFET (DMM) in series with the source of the SiC power MOSFET [10].”
BackgroundMethodSelf-citationShort circuit robustness of 1200 V SiC switches
Singh, R., Grummel, B. J., & Sundaresan, S. (2015) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda.2015.7369309 · Cited by 21
Performance evaluation of SiC MOSFET, Si CoolMOS and IGBT
Liang, M., Zheng, T. Q., & Li, Y. (2014) · IEEE International Power Electronics and Application Conference and Exposition (PEAC) · doi:10.1109/peac.2014.7038063 · Cited by 20 · cited 1×
“Power losses in the inverters can be significantly reduced by replacing Si IGBTs with SiC power MOSFETs [1], [2].”
BackgroundCurrent Saturation Characteristics and Single-Pulse Short-Circuit Tests of Commercial SiC MOSFETs
Xing, D., Hu, B., Yu, S., Zhang, Y., Liu, T., Salemi, A., Kang, M., Wang, J., & Agarwal, A. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8913178 · Cited by 19 · cited 1×
“a load supply voltage of 800 V [3]–[5].”
BackgroundKanale, A., & Baliga, B. J. (2019) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda46397.2019.8998878 · Cited by 15
Self-citation
Research works printed but not linked: 3
- 2019, Rev D
- singh, 0, Short circuit robustness of 1200V SiC switches, Proc IEEE 3rd Workshop Wide Bandgap Power Devices Appl, 1
- bolotnikov, 0, Overview of 1.2 kV – 2.2 kV SiC MOSFETs targeted for industrial power conversion applications, Proc IEEE Appl Power Electron Conf Expo, 2445
Cited by
Buffolo, M., Favero, D., Marcuzzi, A., De Santi, C., Meneghesso, G., Zanoni, E., & Meneghini, M. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3346369 · Cited by 476
“This approach, the Baliga short-circuit improvement concept (BaSIC), improves device performance with respect to the single-source resistance approach [57], [58].”
BackgroundSilicon Carbide Power Devices: Progress and Future Outlook
Baliga, B. J. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3258344 · Cited by 136
“A methodology for selection of the Si EMM device was then created allowing experimental demonstration of an SC withstand time of over 10 μs with less than a 4% increase in the ON-resistance [84].”
Self-citationShort Circuit Protection of Silicon Carbide MOSFETs: Challenges, Methods, and Prospects
Zhang, M., Li, H., Yang, Z., Zhao, S., Wang, X., & Ding, L. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3430897 · Cited by 44
“While optimizing the device structure can enhance short-circuit withstand capability, a tradeoff exists between ON -state resistance ( R ds, on ) and short-circuit withstand capability in the design of SiC MOSFET s [43], [44], [45], [46], [47].”
BackgroundYu, R., Jahdi, S., Alatise, O. M., Gonzalez, J. A. O., Munagala, S. P., Simpson, N., & Mellor, P. (2023) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2023.3316928 · Cited by 30
“In [110], researchers optimized the circuit and investigated the influence of different Si MOSFET products on short circuit current at various temperatures and V gs .”
Yu, H., Wang, J., Deng, G., Liang, S., Liu, H., & Shen, Z. J. (2022) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3192509 · Cited by 26
“[13] A. Kanale and B. J. Baliga, “Selection methodology for Si power MOSFETs used to enhance SiC power MOSFET short-circuit capability with the BaSIC(EMM) topology,” IEEE Trans.”
MethodInfluential
Metadata
- Authors
- Kanale, A., & Baliga, B. J.
- Affiliations
- North Carolina State University (US)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2021-07
- Volume
- 36
- Issue
- 7
- Pages
- 8243-8252
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W3111828312
- Cited by
- 18
- References
- 13
- Citations by year
- 2026: 4 · 2025: 2 · 2024: 4 · 2023: 5 · 2022: 2 · 2021: 1
- FWCI
- 0.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- SiC power MOSFETs, short-circuit withstand capability, saturation drain current, on-resistance, trade-off curves, gate bias
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.