Cu Clip-Bonding Method With Optimized Source Inductance for Current Balancing in Multichip SiC MOSFET Power Module
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Cu clip-bonding is a promising packaging method for lower resistance, lower inductance, and higher reliability than wire-bonding. Previous studies only simply replace bond wires with Cu clips on an individual die. However, current sharing and thermal coupling issues among multichip modules are still big challenges in the clip-bonded silicon carbide (SiC)mosfetpower module. In this article, a novel source inductance optimization method is proposed. Extra modification paths (MPs) on Cu clips are used in this method. A clip-bonded half-bridge multichip SiC power module is designed and fabricated to verify the superiority of the method. In a simple straight layout, the distance between adjacent dies is large enough to avoid heat concentration and junction temperature differences resulting from the thermal coupling effect. The MPs structure on the Cu clip is designed to optimize the power source inductances. Parasitic circuit model and mathematical analysis are derived to demonstrate the features of proposed MPs. Simulations and experiments workbench are conducted to analyze drain current sharing performance. Derivation and simulation show the highest branch's inductance is reduced. Test results show the current imbalance and loss imbalance are relatively mitigated, which proves that the effect of power inductances imbalance is suppressed by the proposed optimization method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685 · cited 1×
“In recent years, wide bandgap semiconductor power devices with superior performance in switching speed and loss have attracted much attention [1].”
BackgroundA Review of SiC Power Module Packaging Technologies: Challenges, Advances, and Emerging Issues
Lee, H., Smet, V., & Tummala, R. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2951801 · Cited by 526
Power Cycling Reliability of Power Module: A Survey
Durand, C., Klingler, M., Coutellier, D., & Naceur, H. (2016) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2016.2516044 · Cited by 239
Yang, F., Lixin, J., Wang, L., Zhang, F., Wang, B., Zhao, C., Wang, J., Bayer, C., & Ferreira, J. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3106316 · Cited by 80
Self-citation
Cited by
Parallel Connection of Silicon Carbide MOSFETs—Challenges, Mechanism, and Solutions
Li, H., Zhao, S., Wang, X., Ding, L., & Mantooth, H. A. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3278270 · Cited by 135
Active Gate Driver for Dynamic Current Balancing of Parallel-Connected SiC MOSFETs
He, Y., Wang, X., Shao, S., & Zhang, J. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3243053 · Cited by 59
Mechanism and Control Strategies for Current Sharing in Multi-Chip Parallel Automotive Power Modules
Jiang, Y., Li, X., & Ma, K. (2024) · Electronics · doi:10.3390/electronics13234654 · Cited by 2
Compact Spatially Symmetric Double-Sided Embedded Packaging Method for Parallel SiC MOSFETs
Zhu, M., Wang, L., Pei, Y., Yang, F., Cheng, Z., & Gao, K. (2024) · 2024 25th International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept63120.2024.10668483 · Cited by 1
Self-citation
Metadata
- Authors
- Wang, L., Zhang, T., Yang, F., Ma, D., Zhao, C., Pei, Y., & Gan, Y.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2022-07
- Volume
- 37
- Issue
- 7
- Pages
- 7952-7964
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W4205595465
- Cited by
- 86
- References
- 4
- FWCI
- 4.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cu Clip-Bonding Method With Optimized Source Inductance for Current Balancing in Multichip SiC MOSFET Power Module. https://app.cochat.ai/papers/10.1109/tpel.2022.3141373
- The paper
- Wang, L., Zhang, T., Yang, F., Ma, D., Zhao, C., Pei, Y., & Gan, Y. (2022). Cu Clip-Bonding Method With Optimized Source Inductance for Current Balancing in Multichip SiC MOSFET Power Module. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2022.3141373
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.