Power Cycling Reliability of Power Module: A Survey
Open accessThe DOI matches its Crossref record; 91 of the 94 references it cites were found in a registry or an index.
Abstract
Electronic devices using semiconductors such as insulated-gate bipolar transistors, metal-oxide-semiconductor field-effect transistors, and diodes are extensively used in electrical traction applications such as locomotive, elevators, subways, and cars. The long-term reliability of such power modules is then highly demanded, and their main reliability criterion is their power cycling capability. Thus, a power cycling test is the most important reliability test for power modules. This test consists in periodically applying a current to a device mounted onto a heat sink. This leads to power loss in the entire module and results in a rise in the semiconductor temperature. In this paper, the different kinds of semiconductors and power modules used for traction applications are described. Experimental and simulation methods employed for power cycling tests are presented. Modules' weak points and fatigue processes are pointed out. Then, a detailed statistical review of publications from 1994 to 2015 dealing with power cycling is presented. This review gives a clear overview of all studies dealing with power cycling that were carried out until now. It reveals the principal trends in power electronic devices and highlights the main reliability issues for which an important lack of knowledge remains.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Comparison of 6H-SiC, 3C-SiC, and Si for power devices
Bhatnagar, M., & Baliga, B. J. (1993) · IEEE Transactions on Electron Devices · doi:10.1109/16.199372 · Cited by 1,120
Selected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039 · cited 2×
“Bond wires are often reported as the weakest component of power modules, responsible for device failures [15], [16], [37].”
BackgroundSemiconductor Power Devices: Physics, Characteristics, Reliability
Lutz, J., Schlangenotto, H., Scheuermann, U., & De Doncker, R. (2011) · Springer eBooks · doi:10.1007/978-3-642-11125-9 · Cited by 706
Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling
Smet, V., Forest, F., Huselstein, J.-J., Richardeau, F., Khatir, Z., Lefebvre, S., & Berkani, M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114313 · Cited by 620
Fast power cycling test of IGBT modules in traction application
Held, M., Jacob, P., Nicoletti, G., Scacco, P., & Poech, M.-H. (2002) · Proceedings of Second International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.1997.618742 · Cited by 585
(2008) · Cited by 578
Reliability of power cycling for igbt power semiconductor modules
Morozumi, A., Yamada, K., Miyasaka, T., Sumi, S., & Seki, Y. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.810661 · Cited by 256
Smet, V., Forest, F., Huselstein, J.-J., Rashed, A., & Richardeau, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196894 · Cited by 232
Power cycling induced failure mechanisms in solder layers
Herrmann, T., Feller, M., Lutz, J., Bayerer, R., & Licht, T. (2007) · 2007 European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417702 · Cited by 116
Hamidi, A., Beck, N., Thomas, K., & Herr, E. (1999) · Microelectronics Reliability · doi:10.1016/s0026-2714(99)00164-x · Cited by 106
Research works printed but not linked: 17
- liew, 0, Electromigration interconnect lifetime under AC and pulsed DC stress, Proc IEEE 27th Int Rel Symp, 215
- 2010, Halbleiterbauelemente—Mechanische und klimatische Prüfverfahren—Teil 34 Lastwechselprüfung
- 2013, Environmental test methods for semiconductor devices Part 1 Test methods 1000 through 1999
- 2007, Power Cycling
- khong, 2007, Fiabilité Prédictive de Composants de Puissance Soumis a des Tests de Fatigue Accélérée
- scheuermann, 0, Power cycling lifetime of advanced power modules for different temperature swings, Proc PCIM Eur, 59
- ong, 0, Heavy Al ribbon interconnect: An alternative solution for hybrid power packaging, Proc IMAPS Int J Microcircuits Electron Packag, 1
- guth, 0, New assembly and interconnects beyond sintering methods, Proc PCIM, 1
- stupar, 0, Lifetime model for solder layers, Proc ECPE Workshop, 1
- böttcher, 0, Laboratory setup for power cycling of IGBT modules with monitoring of ON-state voltage and thermal resistance for state of aging detection, Proc Int Exhib Conf Power Electron Intell Motion Renew Energy Manage PCIM, 1
- hutzler, 2014, Power Cycling Community 1995–2014, Bodo's Power Syst, 2014, 78
- thoben, 0, Modelling and experimental investigations on degradation of microcomponents in power cycling, Proc Ansys Paper, 1
- farassat, 2007, More performance at lower cost—Heavy aluminium ribbon bonding, 1
- 2014, Data sheet for power discrete device SO8-FL
- benzler, 0, New module generation for higher lifetime, Proc Bodo's Power Syst, 30
- jacques, 2010, Etude de la Fatigue Thermomécanique des Composants de Puissance de Type TRIAC Soumis a des Cycles Actifs de Températures
- bouarroudj-berkani, 2008, Etude de la thermo-mécanique de modules electroniques de puissance en ambiance de températures elevées pour des applications de traction de véhicules electriques et hybrides
Cited by
A Review of SiC Power Module Packaging Technologies: Challenges, Advances, and Emerging Issues
Lee, H., Smet, V., & Tummala, R. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2951801 · Cited by 526
“conventional power module package are wire bond lift-off, cracking or delamination of solder die (or substrate) attach, and chip metallization on the top side [37], [38].”
BackgroundOverview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261
“Thus, Rth_jc could be used as an indicator of the solder layer failures [113].”
Reliability of Power Electronic Systems for EV/HEV Applications
Blaabjerg, F., Wang, H., Vernica, I., Liu, B., & Davari, P. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3031041 · Cited by 249
“Power cycling testing of power modules is essential to understand the wear out of the power components, when they are in operation, and predict when failures might occur [13], for example, through degradation.”
BackgroundChoi, U.-M., Blaabjerg, F., & Jorgensen, S. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2690500 · Cited by 248
“Typically, in the PC test, high Tj (40 °C∼100 °C) and Tjm (60 °C∼120 °C) are applied to the DUT in order to obtain test results in a reasonable test time [16], [31].”
MethodA Review on IGBT Module Failure Modes and Lifetime Testing
Abuelnaga, A., Narimani, M., & Bahman, A. S. (2021) · IEEE Access · doi:10.1109/access.2021.3049738 · Cited by 246
“important for the verification of models generated from DC platforms [21], [28], [90], [91].”
Background
Metadata
- Authors
- Durand, C., Klingler, M., Coutellier, D., & Naceur, H.
- Affiliations
- Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielles et Humaines (FR)
- Robert Bosch (Germany) (DE)
- Centre National de la Recherche Scientifique (FR)
- Venue
- IEEE Transactions on Device and Materials Reliability
- Published
- 2016-03
- Volume
- 16
- Issue
- 1
- Pages
- 80-97
- ISSN
- 1530-4388 (ISSN-L)
- 1558-2574
- OpenAlex
- W2294980933
- Cited by
- 239
- References
- 94
- Citations by year
- 2026: 26 · 2025: 29 · 2024: 24 · 2023: 29 · 2022: 26 · 2021: 29 · 2020: 19 · 2019: 25 · 2018: 17 · 2017: 12 · 2016: 3
- FWCI
- 8.76
- Type
- journal article
- Language
- en
- Open access
- green
- uphf.hal.science
- Locations
- IEEE Transactions on Device and Materials Reliability (publishedVersion)
- HAL (submittedVersion, other-oa)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- power cycling reliability, power modules, power devices, traction applications, IGBT, metal-oxide-semiconductor field-effect transistors, power cycling test, fatigue process, heat sinks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Power Cycling Reliability of Power Module: A Survey. https://app.cochat.ai/papers/10.1109/tdmr.2016.2516044
- The paper
- Durand, C., Klingler, M., Coutellier, D., & Naceur, H. (2016). Power Cycling Reliability of Power Module: A Survey. IEEE Transactions on Device and Materials Reliability. https://doi.org/10.1109/tdmr.2016.2516044
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.