A High Power Density Wide Range DC–DC Converter for Universal Electric Vehicle Charging
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
This article presents a single stage isolated bidirectional DC–DC converter comprising of LCL-T resonant network for universal electric vehicle (EV) charging. Fixed frequency operation along with phase-shift control enables easier design of passive components, while achieving high efficiency across wide output voltage range. Furthermore, to increase the switching frequency and consequently the power density, gallium nitride (GaN) switches are explored in the proposed solution. In order to facilitate use of commercially available 650 V GaN transistors, a multi-level inverter and a reconfigurable rectifier architecture is utilized along with LCL-T resonant network, accommodating an input voltage of 800 V, generated from an universal three phase ac input supply, and an output voltage ranging from 150 V to 950 V catering to large variation of battery voltages from different vehicle manufacturers. The constant input voltage-to-output current gain property of LCL-T network, along with an efficient phase-shift modulation proposed in this paper enable soft switching of all transistors with minimum circulating currents over constant current (CC), constant power (CP), and constant voltage (CV) modes of battery charging. Experimental results are provided for a single-phase DC–DC converter prototype utilizing 650 V GaN transistors operating from an 800 V DC bus and providing a very wide output voltage from 150 V to 950 V at 6.6 kW maximum power at a constant switching frequency of 500 kHz. The prototype achieves two peak efficiency points of 98.2% and maintains$>$97% efficiency across the entire output voltage range at a power density of 120 W/in3(7.3 kW/L).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effects of eddy currents in transformer windings
Dowell, P. L. (1966) · Proceedings of the Institution of Electrical Engineers · doi:10.1049/piee.1966.0236 · Cited by 1,438
An LLC Resonant DC–DC Converter for Wide Output Voltage Range Battery Charging Applications
Musavi, F., Craciun, M., Gautam, D. S., Eberle, W., & Dunford, W. G. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2241792 · Cited by 498
A High-Efficiency High-Density Wide-Bandgap Device-Based Bidirectional On-Board Charger
Li, B., Li, Q., Lee, F. C., Liu, Z., & Yang, Y. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2845846 · Cited by 259 · cited 1×
“To support higher power demand for fast charging, generally three phase 480 V ac input is being used with a front end PFC stage providing regulated or semi regulated 800 V bus [3], [4].”
Method
Cited by
Bidirectional Onboard Chargers for Electric Vehicles: State-of-the-Art and Future Trends
Wouters, H., & Martinez, W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3319996 · Cited by 280
Wang, Z., Su, X., Zeng, N., & Jiang, J. (2024) · Energies · doi:10.3390/en17102434 · Cited by 41
“…switching of all the transistors in constant-current, constant-power, and constant-voltage charging modes, with a minimum of circulating current [58]. isolated bidirectional for the simple design of passive components and soft switching of all the constant-current, constant-power, and…”
BackgroundDutta, S., & Bauman, J. (2024) · IEEE Access · doi:10.1109/access.2024.3435463 · Cited by 37
“9 shows an LCL-T isolated DC/DC converter for onboard charging with reduced capacitor RMS current stress, which focuses on efficiency improvement for 800 V charging [49].”
BackgroundMethodInfluentialDutta, S., & Bauman, J. (2024) · 2024 IEEE Transportation Electrification Conference and Expo (ITEC) · doi:10.1109/itec60657.2024.10598874 · Cited by 2
Metadata
- Authors
- Mukherjee, S., Ruiz, J. M., & Barbosa, P.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2023-02
- Volume
- 38
- Issue
- 2
- Pages
- 1998-2012
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W4309160732
- Cited by
- 133
- References
- 3
- FWCI
- 7.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A High Power Density Wide Range DC–DC Converter for Universal Electric Vehicle Charging. https://app.cochat.ai/papers/10.1109/tpel.2022.3217092
- The paper
- Mukherjee, S., Ruiz, J. M., & Barbosa, P. (2023). A High Power Density Wide Range DC–DC Converter for Universal Electric Vehicle Charging. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2022.3217092
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.