The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Experimental Determination of the ZIP Coefficients for Modern Residential, Commercial, and Industrial Loads
Abstract
This paper presents the experimental determination of the ZIP coefficients model to represent (static) modern loads under varying voltage conditions. ZIP are the coefficients of a load model comprised of constant impedance Z, constant current I, and constant power P loads. A ZIP coefficient load model is used to represent power consumed by a load as a function of voltage. A series of surveys was performed on typical residential, commercial, and industrial customers in New York City. Household appliances and industrial equipment found in the different locations were tested in the laboratory by varying the voltage from 1.1-p.u. voltage to 0 and back to 1.1 pu in steps of 3 V to obtain the individual P- V, Q- V, and I- V characteristics. Customer load tables were built using seasonal factors and duty cycles to form weighted contributions for each device in every customer class. The loads found in several residential classes were assembled and tested in the lab. It was found that modern appliances behave quite differently than older appliances even from only 10 years back. Models of the different customer classes were validated against actual recordings of load variations under voltage reduction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power System Stability and Control
Kundur, P. (1994) · Cited by 19,639
Load representation for dynamic performance analysis (of power systems)
Price, W. W., Chiang, H., Clark, H. K., Concordia, C., Lee, D. C., Hsu, J. C., Ihara, S., King, C., Lin, C., Mansour, Y., et al. (1993) · IEEE Transactions on Power Systems · doi:10.1109/59.260837 · Cited by 938
Standard load models for power flow and dynamic performance simulation
(1995) · IEEE Transactions on Power Systems · doi:10.1109/59.466523 · Cited by 635
Load Representation in Power System Stability Studies
Concordia, C., & Ihara, S. (1982) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1982.317163 · Cited by 326
Díaz-Aguiló, M., Sandraz, J., Macwan, R., de León, F., Czarkowski, D., Comack, C., & Wang, D. M. (2013) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2013.2271095 · Cited by 142
Self-citationMulti-State Load Models for Distribution System Analysis
Schneider, K. P., Fuller, J., & Chassin, D. P. (2011) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2011.2132154 · Cited by 118
Cited by
Arif, A., Wang, Z., Wang, J., Mather, B., Bashualdo, H., & Zhao, D. (2018) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2017.2700436 · Cited by 500
Zografopoulos, I., Ospina, J., Liu, X., & Konstantinou, C. (2021) · IEEE Access · doi:10.1109/access.2021.3058403 · Cited by 314
Bi-level volt-var optimization to coordinate smart inverters with voltage control devices
Jha, R. R., Dubey, A., Liu, C.-C., & Schneider, K. P. (2019) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2018.2890613 · Cited by 169
Linear method for steady-state analysis of radial distribution systems
Di Fazio, A. R., Russo, M., Valeri, S., & De Santis, M. (2018) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2018.02.001 · Cited by 63
Analyzing Distribution Transformer Degradation with Increased Power Electronic Loads
Mitra, B., Singhal, A., Kundu, S., & Ogle, J. P. (2023) · 2023 IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT) · doi:10.1109/isgt51731.2023.10066387 · Cited by 13
Metadata
- Authors
- Bokhari, A., Alkan, A., Dogan, R., Diaz-Aguilo, M., de Leon, F., Czarkowski, D., Zabar, Z., Birenbaum, L., Noel, A., & Uosef, R. E.
- Venue
- IEEE Transactions on Power Delivery
- Published
- 2014-06
- Volume
- 29
- Issue
- 3
- Pages
- 1372-1381
- ISSN
- 0885-8977 (ISSN-L)
- 1937-4208
- OpenAlex
- W2024353911
- Cited by
- 366
- References
- 6
- FWCI
- 8.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.