A Hybrid Modular Multilevel Converter With Novel Three-Level Cells for DC Fault Blocking Capability
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
A novel hybrid, modular multilevel converter is presented that utilizes a combination of half-bridge and novel three-level cells where the three-level cells utilize a clamp circuit which, under dc side faults, is capable of blocking fault current thereby avoiding overcurrents in the freewheel diodes. This dc fault blocking capability is demonstrated through simulation and is shown to be as good as the modular multilevel converter which utilizes full-bridge cells but with the added benefits of: lower conduction losses; fewer diode and semiconductor switching devices, and; fewer shoot-through modes. The semiconductor count and conduction loss of the proposed converter are reduced to around 66.5% and 72% of that of modular multilevel converter based on the full-bridge cells respectively, yielding lower semiconductor cost and improved efficiency. Dc fault ride-through operation is realized without exposing the semiconductors to significant fault currents and overvoltages due to the full dc fault blocking capability of the converter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modular Multilevel Converters for HVDC Applications: Review on Converter Cells and Functionalities
Nami, A., Liang, J., Dijkhuizen, F., & Demetriades, G. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2327641 · Cited by 1,042
Marquardt, R. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5544594 · Cited by 773
Design and Operation of a Hybrid Modular Multilevel Converter
Zeng, R., Xu, L., Yao, L., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2320822 · Cited by 455
Self-citationModular Multilevel Converter topologies with DC-Short circuit current limitation
Marquardt, R. (2011) · 8th International Conference on Power Electronics - ECCE Asia · doi:10.1109/icpe.2011.5944451 · Cited by 413 · cited 3×
“of power devices in HB and TL cells [23], [24].”
Background
Cited by
Li, R., Xu, L., & Yao, L. (2017) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2016.2590501 · Cited by 350
Self-citationMerlin, M. M. C., Soto-Sanchez, D., Judge, P. D., Chaffey, G., Clemow, P., Green, T. C., Trainer, D. R., & Dyke, K. J. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2723948 · Cited by 142
Optimized Design and Control for Hybrid MMC With Reduced Capacitance Requirements
Dong, P., Lyu, J., & Cai, X. (2018) · IEEE Access · doi:10.1109/access.2018.2869400 · Cited by 37
Peng, C., & Li, R. (2020) · 2020 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec39645.2020.9124395 · Cited by 4
“In the symmetrical output type, there are full bridge topology (FBSM) [9] [14], unipolar-voltage full bridge submodule (UFBSM) [15], three level clamp-circuit-based topology (CCSM) [16], five-level cross connected double submodule (CCDSM) [17] and serial connected double submodule (SCDSM) [15].”
BackgroundSelf-citation
Metadata
- Authors
- Li, R., Fletcher, J. E., Xu, L., Holliday, D., & Williams, B. W.
- Venue
- IEEE Transactions on Power Delivery
- Published
- 2015-08
- Volume
- 30
- Issue
- 4
- Pages
- 2017-2026
- ISSN
- 0885-8977 (ISSN-L)
- 1937-4208
- OpenAlex
- W2009591842
- Cited by
- 115
- References
- 4
- FWCI
- 7.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.