The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
International Industry Practice on Power System Load Modeling
Abstract
Power system load modeling is a mature and generally well researched area which, as many other in electrical power engineering at the present time, is going through a period of renewed interest in both industry and academia. This interest is fueled by the appearance of new non-conventional types of loads (power electronic-based, or interfaced through power electronics) and requirements to operate modern electric power systems with increased penetration of non-conventional and mostly intermittent types of generation in a safe and secure manner. As a response to this renewed interest, in February 2010 CIGRE established working group C4.605: “Modelling and aggregation of loads in flexible power networks”. One of the first tasks of the working group was to identify current international industry practice on load modeling for static and dynamic power system studies. For that purpose, a questionnaire was developed and distributed during the summer/autumn of 2010 to more than 160 utilities and system operators in over 50 countries on five continents. This paper summarizes some of the key findings from about 100 responses to the questionnaire received by September 2011 and identifies prevalent types of load models used as well as typical values of their parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Load representation for dynamic performance analysis (of power systems)
Price, W. W., Chiang, H., Clark, H. K., Concordia, C., Lee, D. C., Hsu, J. C., Ihara, S., King, C., Lin, C., Mansour, Y., et al. (1993) · IEEE Transactions on Power Systems · doi:10.1109/59.260837 · Cited by 938
Model validation for the August 10, 1996 WSCC system outage
Kosterev, D. N., Taylor, C. W., & Mittelstadt, W. A. (1999) · IEEE Transactions on Power Systems · doi:10.1109/59.780909 · Cited by 871
Standard load models for power flow and dynamic performance simulation
(1995) · IEEE Transactions on Power Systems · doi:10.1109/59.466523 · Cited by 635
Load Representation in Power System Stability Studies
Concordia, C., & Ihara, S. (1982) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1982.317163 · Cited by 326
Cited by
Ferreira Costa, L., De Carne, G., Buticchi, G., & Liserre, M. (2017) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2017.2692381 · Cited by 303
Metadata
- Authors
- Milanovic, J. V., Yamashita, K., Martinez Villanueva, S., Djokic, S. Z., & Korunovic, L. M.
- Venue
- IEEE Transactions on Power Systems
- Published
- 2013-08
- Volume
- 28
- Issue
- 3
- Pages
- 3038-3046
- ISSN
- 0885-8950 (ISSN-L)
- 1558-0679
- OpenAlex
- W2108829714
- Cited by
- 306
- References
- 4
- FWCI
- 5.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: International Industry Practice on Power System Load Modeling. https://app.cochat.ai/papers/10.1109/tpwrs.2012.2231969
- The paper
- Milanovic, J. V., Yamashita, K., Martinez Villanueva, S., Djokic, S. Z., & Korunovic, L. M. (2013). International Industry Practice on Power System Load Modeling. IEEE Transactions on Power Systems. https://doi.org/10.1109/tpwrs.2012.2231969
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
