Failure Mode and Effects Analysis by Using the House of Reliability-Based Rough VIKOR Approach
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Failure mode and effects analysis (FMEA) is a widely used reliability analysis tool for identifying and eliminating known or potential failures in system, design, and process. In traditional FMEA, failure modes are evaluated by FMEA team members with respect to three risk factors: severity (S), occurrence (O), and detectability (D), and ranked via their risk priority number (RPN), which is obtained by multiplying the crisp values of S, O, and D. However, traditional RPN has been considerably criticized due to the following shortcomings: not considering the different weights of risk factors; the identical value of RPN for different combinations of S, O, and D; the diversity and uncertainty of evaluation information given by FMEA team members and without considering the dependence among different failure modes. Although significant efforts have been made in FMEA literatures to overcome these shortcomings, there are still some deficiencies. In this paper, a new risk priority model is presented for FMEA by using the house of reliability (HoR)-based rough VIsekriterijumska optimizacija i KOmpromisno Resenje (VIKOR) approach. In the proposed model, the HoR is introduced to identify the dependence among different failure modes and the link between failure modes and the risk factors of O, D and the subcriteria of S. Rough number is introduced to manipulate the subjectivity and vagueness in decision making and VIKOR approach is used to determine the risk priority order of failure modes in a comprehensive way. Finally, an illustrative case in transmission system of a vertical machining center has demonstrated the effectiveness and practicality of the proposed model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fuzzy logic prioritization of failures in a system failure mode, effects and criticality analysis
Bowles, J. B., & Peláez, C. E. (1995) · Reliability Engineering & System Safety · doi:10.1016/0951-8320(95)00068-d · Cited by 687 · cited 3×
“Bowles and Peláez [38] proposed a fuzzy logic-based approach for prioritizing FMs in a system FMECA.”
MethodInfluentialRisk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean
Wang, Y.-M., Chin, K.-S., Poon, G. K. K., & Yang, J.-B. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.11.028 · Cited by 630
Modified failure mode and effects analysis using approximate reasoning
Pillay, A., & Wang, J. (2003) · Reliability Engineering & System Safety · doi:10.1016/s0951-8320(02)00179-5 · Cited by 581 · cited 1×
“ploy the corrective actions to reduce the loss of failures, decrease the probability of failure rates, and avoid hazardous accidents [3].”
BackgroundFuzzy rule-based Bayesian reasoning approach for prioritization of failures in FMEA
Yang, Z., Bonsall, S., & Wang, J. (2008) · IEEE Transactions on Reliability · doi:10.1109/tr.2008.928208 · Cited by 346
Cited by
Liu, H.-C., Chen, X.-Q., Duan, C.-Y., & Wang, Y.-M. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.06.055 · Cited by 262
An integrated approach for fuzzy failure modes and effects analysis using fuzzy AHP and fuzzy MAIRCA
Boral, S., Howard, I., Chaturvedi, S. K., McKee, K., & Naikan, V. N. A. (2020) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.104195 · Cited by 215
“Since its appearance, it has been used in a variety of industries, including military [2], nuclear [3], aerospace [4], automobile [5], manufacturing [6–8], healthcare [9], etc.”
BackgroundLi, Y., Liu, P., & Li, G. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109196 · Cited by 50
A Concept of Risk Prioritization in FMEA Analysis for Fluid Power Systems
Fabis-Domagala, J., Domagala, M., & Momeni, H. (2021) · Energies · doi:10.3390/en14206482 · Cited by 31
“• expected cost [12]; • corrective actions [13]; • maintainability criticality index [14]; • division of the main risk factors into subfactors [15].”
BackgroundKusumawardani, R., & Widyatmoko, A. A. (2024) · Spektrum Industri · doi:10.12928/si.v22i2.199 · Cited by 4
Metadata
- Authors
- Wang, Z., Gao, J.-M., Wang, R.-X., Chen, K., Gao, Z.-Y., & Zheng, W.
- Venue
- IEEE Transactions on Reliability
- Published
- 2018-03
- Volume
- 67
- Issue
- 1
- Pages
- 230-248
- ISSN
- 0018-9529 (ISSN-L)
- 1558-1721
- OpenAlex
- W2776176331
- Cited by
- 105
- References
- 4
- FWCI
- 9.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Failure Mode and Effects Analysis by Using the House of Reliability-Based Rough VIKOR Approach. https://app.cochat.ai/papers/10.1109/tr.2017.2778316
- The paper
- Wang, Z., Gao, J.-M., Wang, R.-X., Chen, K., Gao, Z.-Y., & Zheng, W. (2018). Failure Mode and Effects Analysis by Using the House of Reliability-Based Rough VIKOR Approach. IEEE Transactions on Reliability. https://doi.org/10.1109/tr.2017.2778316
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.