Roughness Encoding for Discrimination of Surfaces in Artificial Active-Touch
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
A 2 × 2 array of four microelectromechanical system (MEMS) tactile microsensors is integrated with readout electronics in the distal phalanx of an anthropomorphic robotic finger. A total of 16 sensing elements are available in a 22.3-mm area (i.e., 72 units/cm ) of the artificial finger, thus achieving a density comparable with human Merkel mechanoreceptors. The MEMS array is covered by a polymeric packaging with biomimetic fingerprints enhancing the sensitivity in roughness encoding. This paper shows the ability of the sensor array to encode roughness for discrimination of surfaces, without requiring dedicated proprioceptive sensors for end-effector velocity. Three fine surfaces with 400-, 440-, and 480- μm spatial periods are quantitatively evaluated. Core experiments consisted in active-touch exploration of surfaces by the finger executing a stereotyped human-like movement. A time-frequency analysis on pairs of tactile array outputs shows a clustering of the fundamental frequency, thus yielding 97.6% worst-case discrimination accuracy with a k -nearest-neighbor (k-NN) classifier. Hence, surfaces differing down to 40 μm are identified in active-touch by both hardware and processing methods based on exteroceptive tactile information. Finally, active-touch results with five textiles (which differ in texture or orientation) are shown as a preliminary qualitative assessment of discrimination in a more realistic tactile-stimulation scenario.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Application of the cross wavelet transform and wavelet coherence to geophysical time series
Grinsted, A., Moore, J. C., & Jevrejeva, S. (2004) · Nonlinear Processes in Geophysics · doi:10.5194/npg-11-561-2004 · Cited by 6,285 · cited 1×
“Data analysis is performed via the MATLAB wavelet-coherence package (for underlying theory and an application example, see [39]); the default Morlet wavelet function and 100 scales per octave were selected.”
MethodCoding and use of tactile signals from the fingertips in object manipulation tasks
Johansson, R. S., & Flanagan, J. R. (2009) · Nature Reviews Neuroscience · doi:10.1038/nrn2621 · Cited by 2,063
Johansson, R. S., & Vallbo, A. B. (1979) · The Journal of Physiology · doi:10.1113/jphysiol.1979.sp012619 · Cited by 1,291
Consumer design priorities for upper limb prosthetics
Biddiss, E., Beaton, D., & Chau, T. (2007) · Disability and Rehabilitation: Assistive Technology · doi:10.1080/17483100701714733 · Cited by 519 · cited 1×
“Digital Object Identifier 10.1109/TRO.2011.2116930 of sensory feedback [ 4 ].”
BackgroundInfluentialDouble nerve intraneural interface implant on a human amputee for robotic hand control
Rossini, P. M., Micera, S., Benvenuto, A., Carpaneto, J., Cavallo, G., Citi, L., Cipriani, C., Denaro, L., Denaro, V., Di Pino, G., et al. (2010) · Clinical Neurophysiology · doi:10.1016/j.clinph.2010.01.001 · Cited by 396
Self-citationBiomimetic tactile sensor array
Wettels, N., Santos, V. J., Johansson, R. S., & Loeb, G. E. (2008) · Advanced Robotics · doi:10.1163/156855308x314533 · Cited by 348 · cited 1×
“impedance measurements via embedded electrodes [15], [16].”
Peters, R. M., Hackeman, E., & Goldreich, D. (2009) · The Journal of Neuroscience · doi:10.1523/jneurosci.3684-09.2009 · Cited by 231 · cited 1×
“To achieve biomimetism [36], the fingerprints had 400 μm between-ridge distance; their curvature radius was set to 4.8 mm in the center of the sensor array [see the red ridge in Fig.”
MethodInfluential
Cited by
Robotic tactile perception of object properties: A review
Luo, S., Bimbo, J., Dahiya, R., & Liu, H. (2017) · Mechatronics · doi:10.1016/j.mechatronics.2017.11.002 · Cited by 425
Piezoelectric Energy Harvesting Solutions
Caliò, R., Rongala, U., Camboni, D., Milazzo, M., Stefanini, C., De Petris, G., & Oddo, C. (2014) · Sensors · doi:10.3390/s140304755 · Cited by 390
Self-citationBayesian Exploration for Intelligent Identification of Textures
Fishel, J. A., & Loeb, G. E. (2012) · Frontiers in Neurorobotics · doi:10.3389/fnbot.2012.00004 · Cited by 358
Oddo, C. M., Raspopovic, S., Artoni, F., Mazzoni, A., Spigler, G., Petrini, F., Giambattistelli, F., Vecchio, F., Miraglia, F., Zollo, L., et al. (2016) · eLife · doi:10.7554/elife.09148 · Cited by 332
Self-citationToward an AI Era: Advances in Electronic Skins
Fu, X., Cheng, W., Wan, G., Yang, Z., & Tee, B. C. K. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00049 · Cited by 172
Multimodal Feature-Based Surface Material Classification
Strese, M., Schuwerk, C., Iepure, A., & Steinbach, E. (2017) · IEEE Transactions on Haptics · doi:10.1109/toh.2016.2625787 · Cited by 162
Control of prosthetic hands via the peripheral nervous system
Ciancio, A. L., Cordella, F., Barone, R., Romeo, R. A., Bellingegni, A. D., Sacchetti, R., Davalli, A., Di Pino, G., Ranieri, F., Di Lazzaro, V., et al. (2016) · Frontiers in Neuroscience · doi:10.3389/fnins.2016.00116 · Cited by 131
Learning tactile skills through curious exploration
Pape, L., Oddo, C. M., Controzzi, M., Cipriani, C., Förster, A., Carrozza, M. C., & Schmidhuber, J. (2012) · Frontiers in Neurorobotics · doi:10.3389/fnbot.2012.00006 · Cited by 51
“The tip of the robotic finger holds a 2 × 2 array of 3D micro-electromechanical system (MEMS) tactile sensors (see also Oddo et al., 2011b) created with silicon microstructuring technologies.”
BackgroundInfluentialSelf-citationOddo, C. M., Beccai, L., Wessberg, J., Wasling, H. B., Mattioli, F., & Carrozza, M. C. (2011) · Sensors · doi:10.3390/s110605596 · Cited by 49
Self-citationMethods for robotic tool-mediated haptic surface recognition
Romano, J. M., & Kuchenbecker, K. J. (2014) · 2014 IEEE Haptics Symposium (HAPTICS) · doi:10.1109/haptics.2014.6775432 · Cited by 48
Metadata
- Authors
- Oddo, C. M., Controzzi, M., Beccai, L., Cipriani, C., & Carrozza, M. C.
- Venue
- IEEE Transactions on Robotics
- Published
- 2011-06
- Volume
- 27
- Issue
- 3
- Pages
- 522-533
- ISSN
- 1552-3098 (ISSN-L)
- 1941-0468
- OpenAlex
- W2134663441
- Cited by
- 142
- References
- 7
- FWCI
- 4.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.