The DOI matches its Crossref record.
Automatic Distributed Voltage Control Algorithm in Smart Grids Applications
Abstract
The widespread use of distributed generation (DG), which is installed in medium-voltage distribution networks, impacts the future development of modern electrical systems that must evolve towards smart grids. A fundamental topic for smart grids is automatic distributed voltage control (ADVC). The voltage is now regulated at the MV busbar acting on the on-load tap changer of the HV/MV transformer. This method does not guarantee the correct voltage value in the network nodes when the distributed generators deliver their power. In contrast, the ADVC allows control of the voltage acting on a single generator; therefore, a better voltage profile can be obtained. In this paper, an approach based on sensitivity theory is shown to control the node voltages regulating the reactive power injected by the generators. After the theoretical analysis, a numerical example is presented to validate the theory. The proposed voltage regulation method has been developed in collaboration with Enel Distribuzione S.p.A. (the major Italian DSO), and it will be applied in the Smart Grids POI-P3 pilot project, which is financed by the Italian Economic Development Ministry. Before the real field application in the pilot project, a real-time digital simulation has been used to validate the algorithm presented. Moving in this direction, Enel Distribuzione S.p.A. built a new test center in Milan equipped with a real-time digital simulator (from RTDS Technologies).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Intergrid: A Future Electronic Energy Network?
Boroyevich, D., Cvetkovic, I., Burgos, R., & Dong, D. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2276937 · Cited by 262
Improving Hosting Capacity of Rooftop PVs by Quadratic Control of an LV-Central BSS
Astero, P., & Söder, L. (2019) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2017.2754943 · Cited by 76
Linear method for steady-state analysis of radial distribution systems
Di Fazio, A. R., Russo, M., Valeri, S., & De Santis, M. (2018) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2018.02.001 · Cited by 63
Qureshi, M. U., Grijalva, S., Reno, M. J., Deboever, J., Zhang, X., & Broderick, R. J. (2019) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2018.2833748 · Cited by 46
“On the other hand, [26] uses sensitivity theory to perform voltage regulation”
Method
Metadata
- Authors
- Brenna, M., De Berardinis, E., Delli Carpini, L., Foiadelli, F., Paulon, P., Petroni, P., Sapienza, G., Scrosati, G., & Zaninelli, D.
- Venue
- IEEE Transactions on Smart Grid
- Published
- 2013-06
- Volume
- 4
- Issue
- 2
- Pages
- 877-885
- ISSN
- 1949-3053 (ISSN-L)
- 1949-3061
- OpenAlex
- W2136700349
- Cited by
- 190
- References
- 0
- FWCI
- 7.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.