The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Design Considerations of a Centralized Load Controller Using Thermostatically Controlled Appliances for Continuous Regulation Reserves
Abstract
This paper presents design considerations for a centralized load controller to control thermostatically controlled appliances (TCAs) for continuous regulation reserves (CRRs). The controller logics for setting up the baseline load, generating priority lists, issuing dispatch commands, and tuning the simplified forecaster model using measurement data are described. To study the impacts of different control parameter settings on control performance and device lifetimes, a system consisting of 1000 heating, ventilating, and air-conditioning (HVAC) units in their heating modes is modeled to provide a CRR 24 hours a day. Four cases are modeled to evaluate the impact of forecasting errors, minimum HVAC turn-off times, response delays, and consumer overrides. The results demonstrate that a centralized TCA load controller can provide robust, good quality CRRs with reduced communication needs for the two-way communication network and inexpensive load control devices. Most importantly, because the controller precisely controls the aggregated HVAC load shapes while maintaining load diversity, the controllable and measurable load services that it provides can be used for many other demand response applications, such as peak shaving, load shifting, and arbitrage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Callaway, D. S. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.12.012 · Cited by 759
An Evaluation of the HVAC Load Potential for Providing Load Balancing Service
Lu, N. (2012) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2012.2183649 · Cited by 739
Self-citationOperational Impacts of Wind Generation on California Power Systems
Makarov, Y. V., Loutan, C., Ma, J., & de Mello, P. (2009) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2009.2016364 · Cited by 614
Schweppe, F., Tabors, R., Kirtley, J., Outhred, H., Pickel, F., & Cox, A. (1980) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1980.319745 · Cited by 378
An Evaluation of the Water Heater Load Potential for Providing Regulation Service
Kondoh, J., Lü, N., & Hammerstrom, D. J. (2010) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2010.2090909 · Cited by 265
A State-Queueing Model of Thermostatically Controlled Appliances
Lu, N., & Chassin, D. P. (2004) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2004.831700 · Cited by 246
Self-citationHuang, K.-Y., & Huang, Y.-C. (2004) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2004.831705 · Cited by 145
Scheduling direct load control to minimize system operation cost
Chen, J., Lee, F. N., Breipohl, A. M., & Adapa, R. (1995) · IEEE Transactions on Power Systems · doi:10.1109/59.476068 · Cited by 133
Wang, D., Parkinson, S. C., Miao, W., Jia, H., Crawford, C. A., & Djilali, N. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.12.005 · Cited by 120
Loads Providing Ancillary Services: Review of International Experience
Heffner, G., Goldman, C. A., & Kintner-Meyer, M. C. (2007) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/941062 · Cited by 112
Nyeng, P., & Østergaard, J. (2011) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2011.2116811 · Cited by 61
Comfort-Constrained Distributed Heat Pump Management
Parkinson, S. C., Wang, D., Crawford, C. A., & Djilali, N. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.10.112 · Cited by 60
Direct load control using fuzzy dynamic programming
Yang, H., & Huang, K.-Y. (1999) · IEE Proceedings - Generation Transmission and Distribution · doi:10.1049/ip-gtd:19990317 · Cited by 52
A Procedure for Coordinating Direct-Load-Control Strategies to Minimize System Production Costs
Le, K., E., R., Hunter, M., & Jones, K. (1983) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1983.317793 · Cited by 47
Operational Cost Savings of Direct Load Control
Lee, F. N., & Breipohl, A. M. (1984) · IEEE Power Engineering Review · doi:10.1109/mper.1984.5526033 · Cited by 22
Cited by
A Survey on Demand Response Programs in Smart Grids: Pricing Methods and Optimization Algorithms
Vardakas, J. S., Zorba, N., & Verikoukis, C. V. (2015) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2014.2341586 · Cited by 953
Kumari, A., Gupta, R., Tanwar, S., & Kumar, N. (2020) · Journal of Parallel and Distributed Computing · doi:10.1016/j.jpdc.2020.05.004 · Cited by 172
Cappers, P., MacDonald, J., Goldman, C., & Ma, O. (2013) · Energy Policy · doi:10.1016/j.enpol.2013.08.003 · Cited by 99
A hierarchical framework-based coordinated optimization of building HVAC systems and EVs
Zhao, H., Xu, Z., Wu, J., Liu, F., & Guan, X. (2025) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2024.3446908 · Cited by 8
Metadata
- Authors
- Lu, N., & Zhang, Y.
- Venue
- IEEE Transactions on Smart Grid
- Published
- 2013-06
- Volume
- 4
- Issue
- 2
- Pages
- 914-921
- ISSN
- 1949-3053 (ISSN-L)
- 1949-3061
- OpenAlex
- W2090359259
- Cited by
- 265
- References
- 15
- FWCI
- 9.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.