The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Assessment of Perturb and Observe MPPT Algorithm Implementation Techniques for PV Pumping Applications
Open accessAbstract
The energy utilization efficiency of commercial photovoltaic (PV) pumping systems can be significantly improved by employing simple perturb and observe (P&O) maximum power point tracking algorithms. Two such P&O implementation techniques, reference voltage perturbation and direct duty ratio perturbation, are commonly utilized in the literature but no clear criteria for the suitable choice of method or algorithm parameters have been presented. This paper presents a detailed theoretical and experimental comparison of the two P&O implementation techniques on the basis of system stability, performance characteristics, and energy utilization for standalone PV pumping systems. The influence of algorithm parameters on system behavior is investigated and the various advantages and drawbacks of each technique are identified for different weather conditions. Practical results obtained using a 1080-Wp PV array connected to a 1-kW permanent magnet dc motor-centrifugal pump set show very good agreement with the theoretical analysis and numerical simulations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ogata, K., & Brewer, J. W. (1971) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3426465 · Cited by 6,358
Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques
Esram, T., & Chapman, P. L. (2007) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874230 · Cited by 5,425
Optimization of Perturb and Observe Maximum Power Point Tracking Method
Femia, N., Petrone, G., Spagnuolo, G., & Vitelli, M. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.850975 · Cited by 3,002
Maximum photovoltaic power tracking: an algorithm for rapidly changing atmospheric conditions
Hussein, K. H. (1995) · IEE Proceedings - Generation, Transmission and Distribution · doi:10.1049/ip-gtd:19951577 · Cited by 1,764
Development of a microcontroller-based, photovoltaic maximum power point tracking control system
Koutroulis, E., Kalaitzakis, K. C., & Voulgaris, N. C. (2001) · IEEE Transactions on Power Electronics · doi:10.1109/63.903988 · Cited by 1,417
Review of the maximum power point tracking algorithms for stand-alone photovoltaic systems
Salas, V., Olías, E., Barrado, A., & Lázaro, A. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2005.10.023 · Cited by 1,183
Liberty, S. (1972) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1972.1100013 · Cited by 1,040
Comparative study of maximum power point tracking algorithms
Hohm, D. P., & Ropp, M. E. (2003) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.459 · Cited by 865
Dynamic Behavior of a Class of Photovoltaic Power Systems
Wasynezuk, O. (1983) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1983.318109 · Cited by 362
A Maximum Power Point Tracking System With Parallel Connection for PV Stand-Alone Applications
Gules, R., De Pellegrin Pacheco, J., Hey, H. L., & Imhoff, J. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.924033 · Cited by 354
Fuzzy logic implementation for photovoltaic maximum power tracking
Mahmoud, A. M., Mashaly, H. M., Kandil, S. A., Khashab, H. E., & Nashed, M. N. F. (2002) · doi:10.1109/roman.2000.892487 · Cited by 92
Cited by
A comprehensive review on solar PV maximum power point tracking techniques
Ram, J. P., Babu, T. S., & Rajasekar, N. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.076 · Cited by 511
Maximum power point tracking (MPPT) techniques: Recapitulation in solar photovoltaic systems
Verma, D., Nema, S., Shandilya, A. M., & Dash, S. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.068 · Cited by 420
A current and future study on non-isolated DC–DC converters for photovoltaic applications
Taghvaee, M. H., Radzi, M. A. M., Moosavain, S. M., Hizam, H., & Hamiruce Marhaban, M. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.09.023 · Cited by 313
Raghavendra, K. V. G., Zeb, K., Muthusamy, A., Krishna, T. N. V., Kumar, S. V. S. V. P., Kim, D.-H., Kim, M.-S., Cho, H.-G., & Kim, H.-J. (2019) · Electronics · doi:10.3390/electronics9010031 · Cited by 269
Sharma, D. K., & Purohit, G. (2012) · 2012 IEEE 5th India International Conference on Power Electronics (IICPE) · doi:10.1109/iicpe.2012.6450411 · Cited by 52
Metadata
- Authors
- Elgendy, M. A., Zahawi, B., & Atkinson, D. J.
- Venue
- IEEE Transactions on Sustainable Energy
- Published
- 2012-01
- Volume
- 3
- Issue
- 1
- Pages
- 21-33
- ISSN
- 1949-3029 (ISSN-L)
- 1949-3037
- OpenAlex
- W2023183205
- Cited by
- 820
- References
- 11
- FWCI
- 13.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.