Ultralow sub-500nA operating current high-performance TiN\Al2O3\HfO2\Hf\TiN bipolar RRAM achieved through understanding-based stack-engineering
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
We demonstrate sub-500nA switching and tunable set voltage by inserting thin Al2O3layer in TiN\HfO2\Hf\TiN RRAM cell. Stack engineering clearly led to novel insights into the switching phenomenology: (i) O-scavenging is key in the forming process and stack-asymmetry management; (ii) dielectric-stack thinning allows lower forming current; (iii) `natural' (asymmetry-induced) reset switching takes place close to the TiN anode; (iv) reset resistance is limited by material-barrier properties at TiN interface.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“a low-energy consumption for switching (~10fJ per state transition with zero-static consumption when idle50)”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [50]
Citations
Cites
Influence of Al2O3 crystallization on band offsets at interfaces with Si and TiNx
Afanas'ev, V. V., Houssa, M., Stesmans, A. L., Merckling, C., Schram, T., & Kittl, J. A. (2011) · Applied Physics Letters · doi:10.1063/1.3623439 · Cited by 61
Self-citationPantisano, L., Afanas'ev, V. V., Cimino, S., Adelmann, C., Goux, L., Chen, Y. Y., Kittl, J. A., Wouters, D. J., & Jurczak, M. (2011) · Microelectronic Engineering · doi:10.1016/j.mee.2011.03.057 · Cited by 42
Self-citation
Research works printed but not linked: 4
- lee, 2010, IEDM
- wang, 2010, IEDM
- govoreanu, 2011, IEDM
- degraeve, 2010, IEDM
Cited by
Overview of emerging nonvolatile memory technologies
Meena, J. S., Sze, S. M., Chand, U., & Tseng, T.-Y. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-526 · Cited by 801
“have explained that using a stacked RRAM structure has been shown to be one of the most promising methods to improve the memory characteristics [124].”
MethodHardware implementation of memristor-based artificial neural networks
Aguirre, F., Sebastian, A., Le Gallo, M., Song, W., Wang, T., Yang, J. J., Lu, W., Chang, M.-F., Ielmini, D., Yang, Y., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45670-9 · Cited by 564
“…non-volatile states (up to ~100 47,48 , and even ~1000 49 ), ii) a low-energy consumption for switching(~10fJperstatetransitionwithzero-staticconsumptionwhen idle 50 ), and iii) a scalable structure appropriate for matrix integration (often referred to as crossbar 51 ) and even 3D stacking 52 .”
Power-efficient neural network with artificial dendrites
Li, X., Tang, J., Zhang, Q., Gao, B., Yang, J. J., Song, S., Wu, W., Zhang, W., Yao, P., Deng, N., et al. (2020) · Nature Nanotechnology · doi:10.1038/s41565-020-0722-5 · Cited by 255
Nanoionic memristive phenomena in metal oxides: the valence change mechanism
Dittmann, R., Menzel, S., & Waser, R. (2021) · Advances in Physics · doi:10.1080/00018732.2022.2084006 · Cited by 194
Technological Exploration of RRAM Crossbar Array for Matrix-Vector Multiplication
Xia, L., Gu, P., Li, B., Tang, T., Yin, X., Huangfu, W., Yu, S., Cao, Y., Wang, Y., & Yang, H. (2016) · Journal of Computer Science and Technology · doi:10.1007/s11390-016-1608-8 · Cited by 183
“Some researchers use the technology at the device level to improve the performance of RRAM, such as using emerging oxide material with special characteristic[15,18-19] and optimizing the thickness of oxide layer[20-21].”
Background
Metadata
- Authors
- Goux, L., Fantini, A., Kar, G., Chen, Y.-Y., Jossart, N., Degraeve, R., Clima, S., Govoreanu, B., Lorenzo, G., Pourtois, G., Wouters, D. J., Kittl, J. A., Altimime, L., & Jurczak, M.
- Affiliations
- IMEC (BE)
- Venue
- 2012 Symposium on VLSI Technology (VLSIT)
- Publisher
- IEEE
- Published
- 2012-06
- Pages
- 159-160
- OpenAlex
- W2130388397
- Cited by
- 67
- References
- 2
- Citations by year
- 2026: 2 · 2024: 3 · 2023: 2 · 2022: 5 · 2021: 2 · 2020: 4 · 2019: 1 · 2018: 4 · 2017: 7 · 2016: 7 · 2015: 13 · 2014: 14 · 2013: 3
- FWCI
- 12.25
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Symposium on VLSI Technology (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- resistive random access memory, Al2O3 interlayer, tin anode
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.