The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Additive Manufacturing of Dense Alumina Ceramics
Abstract
In this study, a new process for additive manufacturing ( AM ) of dense and strong ceramic objects is described. The lithography‐based ceramic manufacturing ( LCM ) technique is based on the selective curing of a photosensitive slurry by a dynamic mask exposure process. The LCM technique is able to produce strong, dense and accurate alumina ceramics without virtually any geometrical limitations. With over 99.3% of a theoretical alumina density, four‐point bending strength of 427 MP a, and very smooth surfaces, the LCM process distinguishes itself from other AM techniques for ceramics and provides parts with very similar mechanical properties as conventionally formed alumina.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Schieker, M., & Seitz, H. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4716-5 · Cited by 499
Ceramic components manufacturing by selective laser sintering
Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.085 · Cited by 351
Direct Inkjet Printing of Dental Prostheses Made of Zirconia
Ebert, J., Özkol, E., Zeichner, A., Uibel, K., Weiss, Ö., Koops, U., Telle, R., & Fischer, H. (2009) · Journal of Dental Research · doi:10.1177/0022034509339988 · Cited by 281
Net shaped high performance oxide ceramic parts by selective laser melting
Yves-Christian, H., Jan, W., Wilhelm, M., Konrad, W., & Reinhart, P. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.086 · Cited by 276
Lithography‐Based Additive Manufacturing of Cellular Ceramic Structures
Felzmann, R., Gruber, S., Mitteramskogler, G., Tesavibul, P., Boccaccini, A. R., Liska, R., & Stampfl, J. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201200010 · Cited by 203
Badev, A., Abouliatim, Y., Chartier, T., Lecamp, L., Lebaudy, P., Chaput, C., & Delage, C. (2011) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2011.05.010 · Cited by 169
Special materials used in FDM rapid prototyping technology application
Nováková-Marcinčínová, Ľ., Novák-Marcinčin, J., Barna, J., & Török, J. (2012) · IEEE International Conference on Intelligent Engineering Systems (INES) · doi:10.1109/ines.2012.6249805 · Cited by 90
Fabrication of Functionally Graded Materials Via Inkjet Color Printing
Wang, J., & Shaw, L. L. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01206.x · Cited by 81
State-of-the-art review on selective laser melting of ceramics
Yeong, W. Y., Yap, C. Y., Mapar, M., et al. (2013) · CRC Press eBooks · doi:10.1201/b15961-14 · Cited by 38
Cited by
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
Halloran, J. W. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031841 · Cited by 544
Chen, Z., Li, J., Liu, C., Liu, Y., Zhu, J., & Lao, C. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.03.024 · Cited by 304
A review on 3D printed matrix polymer composites: its potential and future challenges
Saroia, J., Wang, Y., Wei, Q., Lei, M., Li, X., Guo, Y., & Zhang, K. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04534-z · Cited by 253
Additive manufacturing of lunar regolith structures
Altun, A. A., Ertl, F., Marechal, M., Makaya, A., Sgambati, A., & Schwentenwein, M. (2021) · Open Ceramics · doi:10.1016/j.oceram.2021.100058 · Cited by 88
Self-citation
Metadata
- Authors
- Schwentenwein, M., & Homa, J.
- Venue
- International Journal of Applied Ceramic Technology
- Publisher
- Wiley
- Published
- 2014-09-19
- Volume
- 12
- Issue
- 1
- Pages
- 1-7
- ISSN
- 1546-542X (ISSN-L)
- 1744-7402
- OpenAlex
- W2055550070
- Cited by
- 465
- References
- 9
- FWCI
- 20.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive Manufacturing of Dense Alumina Ceramics. https://app.cochat.ai/papers/10.1111/ijac.12319
- The paper
- Schwentenwein, M., & Homa, J. (2015). Additive Manufacturing of Dense Alumina Ceramics. International Journal of Applied Ceramic Technology. https://doi.org/10.1111/ijac.12319
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
