The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Microstructural Design of Toughened Ceramics
Abstract
The fracture toughness of ceramics can be improved by the incorporation of a variety of discontinuous, elastic reinforcing phases that generate a crack‐bridging zone. Recent models of toughening by crack‐bridging processes are discussed and used to describe the behavior observed in whisker‐reinforced ceramics. The toughening response in ceramics reinforced with other types of discontinuous reinforcements is then considered (e.g., matrix and second‐phase platelike grains, elongated matrix grains, and grain‐size effects in noncubic matrices). It is shown that crack‐bridging toughening processes can be combined with other bridging mechanisms and with other toughening mechanisms (e.g., transformation toughening) to achieve synergistic effects. From these discussions, it is shown that the design of the toughened materials relies heavily on the control of the material properties and microstructural components influencing the toughening behavior to optimize the contributions of both the reinforcing phase and the matrix.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Cited by
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
Meza, L. R., Das, S., & Greer, J. R. (2014) · Science · doi:10.1126/science.1255908 · Cited by 1,498
Nanocomposites: synthesis, structure, properties and new application opportunities
Camargo, P. H. C., Satyanarayana, K. G., & Wypych, F. (2009) · Materials Research · doi:10.1590/s1516-14392009000100002 · Cited by 1,350
Mechanisms of fatigue-crack propagation in ductile and brittle solids
Ritchie, R. O. (1999) · International Journal of Fracture · doi:10.1023/a:1018655917051 · Cited by 962
Strong, tough and stiff bioinspired ceramics from brittle constituents
Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S. (2014) · Nature Materials · doi:10.1038/nmat3915 · Cited by 959
Lee, J., Mahendra, S., & Alvarez, P. J. J. (2010) · ACS Nano · doi:10.1021/nn100866w · Cited by 750
Metadata
- Authors
- Becher, P. F.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 1991-02
- Volume
- 74
- Issue
- 2
- Pages
- 255-269
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2114113587
- Cited by
- 997
- References
- 1
- FWCI
- 48.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructural Design of Toughened Ceramics. https://app.cochat.ai/papers/10.1111/j.1151-2916.1991.tb06872.x
- The paper
- Becher, P. F. (1991). Microstructural Design of Toughened Ceramics. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1151-2916.1991.tb06872.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.