The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Mechanical Behavior of Alumina–Silicon Carbide „Nanocomposites”
Abstract
The fracture behavior of Al 2 O 3 containing 5 vol% 0.15μm SiC particles was investigated using indentation techniques. A significant increase in strength was achieved by the addition of SiC particles to the base Al 2 O 3 . Specifically, the strength increased from 560 MPa for Al 2 O 3 to 760 MPa for the composite samples (average values for unindented hotpressed bars tested in four‐point bending). After annealing for 2 h at 1300°C, the average strength of the composite samples increased to about 1000 MPa. Toughness was estimated using indentation‐strength data. While there was a slight increase in toughness, the increase was not sufficient to account for the increase in the unindented strength on SiC particle addition. It is suggested that the observed strengthening and apparent toughening were due to a machining‐induced compressive surface stress.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Anstis, G. R., Chantikul, P., Lawn, B. R., & Marshall, D. B. (1981) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1981.tb10320.x · Cited by 5,653
Formulas for Stress and Strain
Roark, R. J., Young, W. C., & Plunkett, R. (1976) · Journal of Applied Mechanics · doi:10.1115/1.3423917 · Cited by 1,927
Role of Grain Size in the Strength and R‐Curve Properties of Alumina
Chantikul, P., Bennison, S. J., & Lawn, B. R. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb07607.x · Cited by 347
Cited by
Porous silica and carbon derived materials from rice husk pyrolysis char
Shen, Y., Zhao, P., & Shao, Q. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.01.005 · Cited by 281
Finite element analysis of the damage and healing behavior of self-healing ceramic materials
Ozaki, S., Osada, T., & Nakao, W. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.08.026 · Cited by 62
Finite element analysis of the fracture statistics of self-healing ceramics
Ozaki, S., Nakamura, M., & Osada, T. (2020) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2020.1800368 · Cited by 16
Metadata
- Authors
- Zhao, J., Stearns, L. C., Harmer, M. P., Chan, H. M., Miller, G. A., & Cook, R. F.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 1993-02
- Volume
- 76
- Issue
- 2
- Pages
- 503-510
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2090462753
- Cited by
- 344
- References
- 3
- FWCI
- 14.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical Behavior of Alumina–Silicon Carbide „Nanocomposites”. https://app.cochat.ai/papers/10.1111/j.1151-2916.1993.tb03814.x
- The paper
- Zhao, J., Stearns, L. C., Harmer, M. P., Chan, H. M., Miller, G. A., & Cook, R. F. (1993). Mechanical Behavior of Alumina–Silicon Carbide „Nanocomposites”. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1151-2916.1993.tb03814.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.