The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Master Sintering Curve: A Practical Approach to Sintering
Abstract
One of the ultimate objectives for sintering studies is to be able to predict densiflcation results under different thermal histories for a given processing method. It has been reported that the geometric parameters related to sintering often are functions only of density for a given powder and green‐body process, provided that one diffusion mechanism dominates in the sintering process. Based on this report, the concept of a master sintering curve has been developed that characterizes the sintering behavior for a given powder and green‐body process regardless of the heating profiles. The formulation and construction of the master sintering curve are given in this paper. A model experiment on sintering of alumina is used and analyzed to demonstrate this new concept. Examples of the master sintering curves obtained from other powder systems (ZnO, nickel, A1 2 O 3 (5 vol% TiO 2 ), and A1 2 O 3 (5 vol% ZrO 2 )) are presented. When this new method is used, densification behavior can be predicted under arbitrary temperature‐time excursions following a minimal set of preliminary experiments, and these predictions can be used in planning sintering strategies. Moreover, deviations from the assumption of a single mechanism can be observed readily.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sintering Crystalline Solids. I. Intermediate and Final State Diffusion Models
COBLE, R. L. (1961) · Journal of Applied Physics · doi:10.1063/1.1736107 · Cited by 1,152
Kingery, W. D., & Berg, M. (1955) · Journal of Applied Physics · doi:10.1063/1.1721874 · Cited by 883
A first report on sintering diagrams
Ashby, M. F. (1974) · Acta Metallurgica · doi:10.1016/0001-6160(74)90167-9 · Cited by 604
Johnson, D. L. (1969) · Journal of Applied Physics · doi:10.1063/1.1657030 · Cited by 496
Self-citationSelf-diffusion in sintering of metallic particles
Kuczynski, G. C. (1949) · JOM · doi:10.1007/bf03398090 · Cited by 393
Wang, J., & Raj, R. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb05175.x · Cited by 358
Combined‐Stage Sintering Model
Hansen, J. D., Rusin, R. P., Teng, M., & Johnson, D. L. (1992) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1992.tb05549.x · Cited by 292
Self-citationOn constrained sintering—II. Comparison of constitutive models
Bordia, R. K., & Scherer, G. W. (1988) · Acta Metallurgica · doi:10.1016/0001-6160(88)90190-3 · Cited by 201
Effect of Heating Rate on Sintering and Coarsening
Chu, M., Rahaman, M. N., Jonghe, L. C. D., & Brook, R. J. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb04090.x · Cited by 163
Computer Simulation of Final‐Stage Sintering: I, Model Kinetics, and Microstructure
Hassold, G. N., Chen, I., & Srolovitz, D. J. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06686.x · Cited by 139
Cited by
Theory of sintering: from discrete to continuum
Olevsky, E. A. (1998) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(98)00009-6 · Cited by 728
Microwave Sintering: Fundamentals and Modeling
Rybakov, K. I., Olevsky, E. A., & Krikun, E. V. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12278 · Cited by 358
Densification and grain growth during sintering of nanosized particles
Fang, Z. Z., & Wang, H. (2008) · International Materials Reviews · doi:10.1179/174328008x353538 · Cited by 332
Reiterer, M. W., Ewsuk, K. G., & Argüello, J. G. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01041.x · Cited by 60
A comparative study of different sintering models for Al2O3
VAN NGUYEN, C., SISTLA, S. K., VAN KEMPEN, S., GIANG, N. A., BEZOLD, A., BROECKMANN, C., & LANGE, F. (2016) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.15257 · Cited by 49
Metadata
- Authors
- Su, H., & Johnson, D. L.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 1996-12
- Volume
- 79
- Issue
- 12
- Pages
- 3211-3217
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2124752280
- Cited by
- 506
- References
- 15
- FWCI
- 2.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Master Sintering Curve: A Practical Approach to Sintering. https://app.cochat.ai/papers/10.1111/j.1151-2916.1996.tb08097.x
- The paper
- Su, H., & Johnson, D. L. (1996). Master Sintering Curve: A Practical Approach to Sintering. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1151-2916.1996.tb08097.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.