The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Processing and Mechanical Properties of Ti 3 SiC 2 : II, Effect of Grain Size and Deformation Temperature
Abstract
In this article, the second part of a two‐part study, we report on the mechanical behavior of Ti 3 SiC 2 . In particular, we have evaluated the mechanical response of fine‐grained (3–5 μm) Ti 3 SiC 2 in simple compression and flexure tests, and we have compared the results with those of coarse‐grained (100–200 μm) Ti 3 SiC 2 . These tests have been conducted in the 25°–1300°C temperature range. At ambient temperature, the fine‐ and coarse‐grained microstructures exhibit excellent damage‐tolerant properties. In both cases, failure is brittle up to ∼1200°C. At 1300°C, both microstructures exhibit plastic deformation (>20%) in flexure and compression. The fine‐grained material exhibits higher strength compared with the coarse‐grained material at all temperatures. Although the coarse‐grained material is not susceptible to thermal shock (up to 1400°C), the fine‐grained material thermally shocks gradually between 750° and 1000°C. The results presented herein provide evidence for two important aspects of the mechanical behavior of Ti 3 SiC 2 : (i) inelastic deformation entails basal slip and damage formation in the form of voids, grain‐boundary cracks, kinking, and delamination of individual grains, and (ii) the initiation of damage does not result in catastrophic failure, because Ti 3 SiC 2 can confine the spatial extent of the damage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Frank, F. C., & Stroh, A. N. (1952) · Proceedings of the Physical Society Section B · doi:10.1088/0370-1301/65/10/311 · Cited by 217
Cited by
The MN+1AXN phases: A new class of solids
Barsoum, M. W. (2000) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(00)00006-6 · Cited by 3,665
Self-citationElastic and Mechanical Properties of the MAX Phases
Barsoum, M. W., & Radovic, M. (2011) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-062910-100448 · Cited by 1,250
Self-citationProcessing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0.5N0.5
Barsoum, M. W., El-Raghy, T., & Ali, M. (2000) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0243-3 · Cited by 571
Self-citationProcessing of MAX phases: From synthesis to applications
Gonzalez‐Julian, J. (2021) · Journal of the American Ceramic Society · doi:10.1111/jace.17544 · Cited by 554
Fully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1 GPa
Barsoum, M. W., Zhen, T., Kalidindi, S. R., Radovic, M., & Murugaiah, A. (2003) · Nature Materials · doi:10.1038/nmat814 · Cited by 390
Self-citation
Metadata
- Authors
- El‐Raghy, T., Barsoum, M. W., Zavaliangos, A., & Kalidindi, S. R.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 1999-10
- Volume
- 82
- Issue
- 10
- Pages
- 2855-2860
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2109753147
- Cited by
- 392
- References
- 1
- FWCI
- 10.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Processing and Mechanical Properties of Ti 3 SiC 2 : II, Effect of Grain Size and Deformation Temperature. https://app.cochat.ai/papers/10.1111/j.1151-2916.1999.tb02167.x
- The paper
- El‐Raghy, T., Barsoum, M. W., Zavaliangos, A., & Kalidindi, S. R. (1999). Processing and Mechanical Properties of Ti 3 SiC 2 : II, Effect of Grain Size and Deformation Temperature. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1151-2916.1999.tb02167.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.