The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Elastic and Mechanical Properties of the MAX Phases
Abstract
The more than 60 ternary carbides and nitrides, with the general formula M n+1 AX n—where n = 1, 2, or 3; M is an early transition metal; A is an A-group element (a subset of groups 13–16); and X is C and/or N—represent a new class of layered solids, where M n+1 X n layers are interleaved with pure A-group element layers. The growing interest in the M n+1 AX n phases lies in their unusual, and sometimes unique, set of properties that can be traced back to their layered nature and the fact that basal dislocations multiply and are mobile at room temperature. Because of their chemical and structural similarities, the MAX phases and their corresponding MX phases share many physical and chemical properties. In this paper we review our current understanding of the elastic and mechanical properties of bulk MAX phases where they differ significantly from their MX counterparts. Elastically the MAX phases are in general quite stiff and elastically isotropic. The MAX phases are relatively soft (2–8 GPa), are most readily machinable, and are damage tolerant. Some of them are also lightweight and resistant to thermal shock, oxidation, fatigue, and creep. In addition, they behave as nonlinear elastic solids, dissipating 25% of the mechanical energy during compressive cycling loading of up to 1 GPa at room temperature. At higher temperatures, they undergo a brittle-to-plastic transition, and their mechanical behavior is a strong function of deformation rate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The MN+1AXN phases: A new class of solids
Barsoum, M. W. (2000) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(00)00006-6 · Cited by 3,665
Self-citationOverview No. 104 The physical and mechanical properties of NiAl
Miracle, D. B. (1993) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(93)90001-9 · Cited by 1,066
Layered Machinable and Electrically Conductive Ti2AlC and Ti3AlC2 Ceramics: a Review
Wang, X. H., & Zhou, Y. C. (2010) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(10)60064-3 · Cited by 655
Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0.5N0.5
Barsoum, M. W., El-Raghy, T., & Ali, M. (2000) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0243-3 · Cited by 571
Self-citationCalculated elastic properties of M2AlC (M=Ti, V, Cr, Nb and Ta)
Sun, Z., Li, S., Ahuja, R., & Schneider, J. M. (2004) · Solid State Communications · doi:10.1016/j.ssc.2003.12.008 · Cited by 499
Wills, R. B. H., McGlasson, W. B., Graham, D., & Joyce, D. C. (2017) · Postharvest: an introduction to the physiology and handling of fruit, vegetables and ornamentals · doi:10.1079/9781845932275.0052 · Cited by 481
The MAX Phases: Unique New Carbide and Nitride Materials
Barsoum, M., & El-Raghy, T. (2001) · American Scientist · doi:10.1511/2001.4.334 · Cited by 433
Self-citationEl‐Raghy, T., Barsoum, M. W., Zavaliangos, A., & Kalidindi, S. R. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb02167.x · Cited by 392
Self-citationFully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1 GPa
Barsoum, M. W., Zhen, T., Kalidindi, S. R., Radovic, M., & Murugaiah, A. (2003) · Nature Materials · doi:10.1038/nmat814 · Cited by 390
Self-citationElectrical transport, thermal transport, and elastic properties ofM2AlC(M=Ti, Cr, Nb, and V)
Hettinger, J. D., Lofland, S. E., Finkel, P., Meehan, T., Palma, J., Harrell, K., Gupta, S., Ganguly, A., El-Raghy, T., & Barsoum, M. W. (2005) · Physical Review B · doi:10.1103/physrevb.72.115120 · Cited by 302
Self-citation
Cited by
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Tang, Q., Zhou, Z., & Shen, P. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308463r · Cited by 2,254
Applications of 2D MXenes in energy conversion and storage systems
Pang, J., Mendes, R. G., Bachmatiuk, A., Zhao, L., Ta, H. Q., Gemming, T., Liu, H., Liu, Z., & Rummeli, M. H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00324f · Cited by 1,951
Advances in the Synthesis of 2D MXenes
Wei, Y., Zhang, P., Soomro, R. A., Zhu, Q., & Xu, B. (2021) · Advanced Materials · doi:10.1002/adma.202103148 · Cited by 1,216
MXene: a promising photocatalyst for water splitting
Guo, Z., Zhou, J., Zhu, L., & Sun, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04414j · Cited by 744
Metadata
- Authors
- Barsoum, M. W., & Radovic, M.
- Venue
- Annual Review of Materials Research
- Publisher
- Annual Reviews
- Published
- 2011-08-04
- Volume
- 41
- Issue
- 1
- Pages
- 195-227
- ISSN
- 1531-7331 (ISSN-L)
- 1545-4118
- OpenAlex
- W2154674568
- Cited by
- 1,250
- References
- 20
- FWCI
- 1.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Elastic and Mechanical Properties of the MAX Phases. https://app.cochat.ai/papers/10.1146/annurev-matsci-062910-100448
- The paper
- Barsoum, M. W., & Radovic, M. (2011). Elastic and Mechanical Properties of the MAX Phases. Annual Review of Materials Research. https://doi.org/10.1146/annurev-matsci-062910-100448
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.