Upper‐regime parallel lamination as the result of turbulent sediment transport and low‐amplitude bed forms
The DOI matches its Crossref record.
Abstract
A series of laboratory experiments has been carried out in which parallel‐laminated deposits were produced from an upper‐regime plane bed. The laminae had thicknesses of a few mm and could be traced continuously over distances up to the length and width of the depositional area (0–3 m by 1–5m). Fluctuations in bed elevation were measured both during deposition and at equilibrium; much of the bed fluctuation occurs at time scales that are too long to be due directly to turbulence, as most theories for lamina formation would require. We suggest instead that extremely low‐amplitude bed forms are present even on apparently flat beds and that the migration of these bed forms produces laterally continuous lamination. All the lamination produced in the laboratory experiments was normally graded. Using high‐speed photography it was observed that the normal grading results from rapid deposition of a layer of loosely packed coarse sand several grain‐diameters thick followed by the slow sieving‐out of a well packed surface layer of finer sand. The initial deposition is the result of small‐scale turbulent fluctuations in boundary shear stress. The sieving‐out that follows results in a smooth surface whose low friction coefficient temporarily inhibits further deposition; we term this process ‘glazing’. The alignment of small‐scale turbulent scour‐and‐fill structures along the paths traced by migrating bedform troughs produces laterally continuous parallel lamination.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Fielding, C. R. (2006) · Sedimentary Geology · doi:10.1016/j.sedgeo.2006.05.009 · Cited by 361
Cartigny, M. J. B., Ventra, D., Postma, G., & van Den Berg, J. H. (2014) · Sedimentology · doi:10.1111/sed.12076 · Cited by 345
Fluvial Facies Models: Recent Developments
BRIDGE, J. S. (2011) · Facies Models Revisited · doi:10.2110/pec.06.84.0085 · Cited by 339
Compositionally and density stratified igneous terrain in Jezero crater, Mars
Wiens, R. C., Udry, A., Beyssac, O., Quantin-Nataf, C., Mangold, N., Cousin, A., Mandon, L., Bosak, T., Forni, O., McLennan, S. M., et al. (2022) · Science Advances · doi:10.1126/sciadv.abo3399 · Cited by 152
(1993) · Cited by 27
Metadata
- Authors
- PAOLA, C., WIELE, S. M., & REINHART, M. A.
- Venue
- Sedimentology
- Publisher
- Wiley
- Published
- 1989-02
- Volume
- 36
- Issue
- 1
- Pages
- 47-59
- ISSN
- 0037-0746 (ISSN-L)
- 1365-3091
- OpenAlex
- W2075345459
- Cited by
- 149
- References
- 0
- FWCI
- 15.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Upper‐regime parallel lamination as the result of turbulent sediment transport and low‐amplitude bed forms. https://app.cochat.ai/papers/10.1111/j.1365-3091.1989.tb00819.x
- The paper
- PAOLA, C., WIELE, S. M., & REINHART, M. A. (1989). Upper‐regime parallel lamination as the result of turbulent sediment transport and low‐amplitude bed forms. Sedimentology. https://doi.org/10.1111/j.1365-3091.1989.tb00819.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.