The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Long‐Term Monitoring and Identification of Bridge Structural Parameters
Open accessAbstract
Abstract: Vibration of a new concrete bridge was monitored and change in the bridge structural stiffness was identified accordingly over a 5‐year period. This three‐span 111‐m long bridge is instrumented with 13 acceleration sensors at both the superstructure and the columns. The sensor data are transmitted to a server computer wirelessly. Modal parameters of the bridge, that is, the frequencies and the modal shapes were identified by processing 1,707 vibration data sets collected under traffic excitations, based on which the bridge structural parameters, stiffness and mass, and the soil spring values were identified by employing the neural network technique. The identified superstructure stiffness at the beginning of the monitoring was 97% of the stiffness value based on the design drawings. In the identified modal frequencies, a variation from −10% to +10% was observed over the monitoring period. In the identified stiffness values of the bridge superstructure, a variation from −3% to +3% was observed over the monitoring period. Based on the statistical analysis of the collected data for each year, 5% decrease in the first modal frequency and 2% decrease in the superstructure stiffness were observed over the 5‐year monitoring period. Probability density functions were obtained for stiffness values each year. Stiffness threshold values for the collapse of the bridge under the operational loading can be determined. Then the number of years can be assessed for which the area under the proposed probability density functions is greater than the threshold value. So the information obtained in this study is valuable for studying aging and long‐term performance assessment of similar bridges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Los Alamos National Lab., N. (. S., Doebling, S., USDOE, W., Farrar, C., Prime, M., & Shevitz, D. (1996) · doi:10.2172/249299 · Cited by 2,899
Cited by
Emerging Artificial Intelligence Methods in Structural Engineering
Salehi, H., & Burgueño, R. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.05.084 · Cited by 1,068
Machine Learning Algorithms in Civil Structural Health Monitoring: A Systematic Review
Flah, M., Nunez, I., Ben Chaabene, W., & Nehdi, M. L. (2021) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-020-09471-9 · Cited by 533
Machine learning algorithms for damage detection under operational and environmental variability
Figueiredo, E., Park, G., Farrar, C. R., Worden, K., & Figueiras, J. (2011) · Structural Health Monitoring · doi:10.1177/1475921710388971 · Cited by 440
Smart structures: Part I—Active and semi-active control
Fisco, N. R., & Adeli, H. (2011) · Scientia Iranica · doi:10.1016/j.scient.2011.05.034 · Cited by 270
Structural Displacement Measurement Using an Unmanned Aerial System
Yoon, H., Shin, J., & Spencer, B. F. (2018) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12338 · Cited by 265
Metadata
- Authors
- Soyoz, S., & Feng, M. Q.
- Venue
- Computer-Aided Civil and Infrastructure Engineering
- Publisher
- Elsevier BV
- Published
- 2008-12-18
- Volume
- 24
- Issue
- 2
- Pages
- 82-92
- ISSN
- 1093-9687 (ISSN-L)
- 1467-8667
- OpenAlex
- W1984567329
- Cited by
- 171
- References
- 1
- FWCI
- 30.65
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Long‐Term Monitoring and Identification of Bridge Structural Parameters. https://app.cochat.ai/papers/10.1111/j.1467-8667.2008.00572.x
- The paper
- Soyoz, S., & Feng, M. Q. (2009). Long‐Term Monitoring and Identification of Bridge Structural Parameters. Computer-Aided Civil and Infrastructure Engineering. https://doi.org/10.1111/j.1467-8667.2008.00572.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.