Crack Detection and Quantification in Beams Using Wavelets
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A new method has been proposed to detect the location and also to quantify the crack using the deflection response of the damaged beams alone. The deflection is measured at a particular point for various locations of a concentrated load on the beam. This static deflection profile is used as the input signal for wavelet (Symlet) analysis. Due to variation in deflection at some points, compared to their adjacent points, peaks are seen in the wavelet coefficient (WC) plot. These peak points are identified as damage points along the length of the beam. The peaks can also be seen at sensor point and supports. These can be eliminated by performing wavelet analysis for the deflection profile measured at another point. In a real damaged structure, it is very difficult to measure deflection at several points, as a large amount of instrumentation needs to be installed to measure the response. This practical difficulty can be avoided by minimizing the number of measuring points in the field as explained in the present work. A parametric study has been carried out by varying the damage, location of damage, intensity of load, flexural rigidity, and length of the beam. It has been observed that the WCs change with variations in damage, location of damage, intensity of load, flexural rigidity, and length of the beam. A generalized curve has been proposed to quantify the damage in a fixed beam by taking envelop of all maximum WCs of the deflection response measured at damage points.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detection of structural damage through changes in frequency: a review
Salawu, O. S. (1997) · Engineering Structures · doi:10.1016/s0141-0296(96)00149-6 · Cited by 2,080
Cited by
Signal Processing Techniques for Vibration-Based Health Monitoring of Smart Structures
Amezquita-Sanchez, J. P., & Adeli, H. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-014-9135-7 · Cited by 487
Smart structures: Part I—Active and semi-active control
Fisco, N. R., & Adeli, H. (2011) · Scientia Iranica · doi:10.1016/j.scient.2011.05.034 · Cited by 270
Smart structures: Part II — Hybrid control systems and control strategies
Fisco, N. R., & Adeli, H. (2011) · Scientia Iranica · doi:10.1016/j.scient.2011.05.035 · Cited by 177
A Wavelet‐Based Adaptive Pole Assignment Method for Structural Control
Amini, F., & Samani, M. Z. (2014) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12072 · Cited by 70
“Further research has been pursued to improve the efficiency of wavelet analysis in structural control problems (Kim and Adeli, 2005b,b,c,d; Basu and Nagarajaiah, 2008; Umesha et al., 2009; Amini et al., 2013).”
BackgroundA Test Method for Damage Diagnosis of Suspension Bridge Suspender Cables
An, Y., Spencer, B. F., & Ou, J. (2015) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12144 · Cited by 66
“, 2014; Story and Fry, 2014), wavelet-based methods (Umesha et al., 2009; Jiang et al., 2012; Katicha et al., 2014; Su et al. 2014), and statistical pattern recognition algorithms (Sohn et al.”
Metadata
- Authors
- Umesha, P. K., Ravichandran, R., & Sivasubramanian, K.
- Venue
- Computer-Aided Civil and Infrastructure Engineering
- Publisher
- Elsevier BV
- Published
- 2009-09-14
- Volume
- 24
- Issue
- 8
- Pages
- 593-607
- ISSN
- 1093-9687 (ISSN-L)
- 1467-8667
- OpenAlex
- W2047046209
- Cited by
- 62
- References
- 1
- FWCI
- 25.45
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Crack Detection and Quantification in Beams Using Wavelets. https://app.cochat.ai/papers/10.1111/j.1467-8667.2009.00618.x
- The paper
- Umesha, P. K., Ravichandran, R., & Sivasubramanian, K. (2009). Crack Detection and Quantification in Beams Using Wavelets. Computer-Aided Civil and Infrastructure Engineering. https://doi.org/10.1111/j.1467-8667.2009.00618.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.