The DOI matches its Crossref record.
New Cementitious Materials Based on Alkali‐Activated Fly Ash: Performance at High Temperatures
Open accessAbstract
This paper reports on a comparative study of the mechanical performance at different temperatures of a commercial Portland cement, used as a control, and a new cementitious material made from an 8M‐NaOH activated fly ash and containing no OPC. Two types of mechanical tests were conducted: (i) high temperature mechanical tests, to determine the strength and fracture toughness of the two materials between 25° and 600°C, and (ii) post‐thermal treatment tests, to evaluate the residual strength after 1 h of exposure to different temperatures (200°, 400°, 600°, 800°, and 1000°C). In both cases, the results showed that the new cementitious material performed significantly better at high temperatures than the Portland cement control. Differential thermogravimetry (DTG)/TG, Fourier transform infrared (FTIR), and X‐ray diffraction analyses were also conducted to analyze the mineralogical and microstructural variations taking place in the material as a result of high temperature exposure. The results of these tests were correlated with the mechanical behaviour observed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Self-citationGeopolymer foam concrete: An emerging material for sustainable construction
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.081 · Cited by 879
Drying shrinkage in alkali-activated binders – A critical review
Mastali, M., Kinnunen, P., Dalvand, A., Mohammadi Firouz, R., & Illikainen, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.125 · Cited by 468
Mechanical properties of alkali-activated concrete: A state-of-the-art review
Ding, Y., Dai, J.-G., & Shi, C.-J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.121 · Cited by 448
Aiken, T. A., Kwasny, J., Sha, W., & Soutsos, M. N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.011 · Cited by 338
Metadata
- Authors
- Fernández‐Jiménez, A., Palomo, A., Pastor, J. Y., & Martín, A.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2008-10
- Volume
- 91
- Issue
- 10
- Pages
- 3308-3314
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2051102166
- Cited by
- 199
- References
- 0
- FWCI
- 12.26
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: New Cementitious Materials Based on Alkali‐Activated Fly Ash: Performance at High Temperatures. https://app.cochat.ai/papers/10.1111/j.1551-2916.2008.02625.x
- The paper
- Fernández‐Jiménez, A., Palomo, A., Pastor, J. Y., & Martín, A. (2008). New Cementitious Materials Based on Alkali‐Activated Fly Ash: Performance at High Temperatures. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1551-2916.2008.02625.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.