The DOI matches its Crossref record; 106 of the 106 references it cites were found in a registry or an index.
Drying shrinkage in alkali-activated binders – A critical review
Abstract
Abstract Alkali-activated binders have been proposed and have emerged as an alternative to ordinary Portland cement (OPC) binders with acceptable mechanical and durability performances in addition to positive environmental impacts. These alternative binders use a wide range of aluminosilicate precursors, with differing availabilities, reactivities, costs and CO2 emissions. Despite all the studies published on improving the characteristics of these materials in the last decades, some aspects of alkali-activated binders require further investigations. For instance, shrinkage in alkali-activated binders due to the different chemical processes being involved is more complicated than OPC composites and it plays a key role in long-term performance. However, information on the shrinkage behavior of these binder systems is scattered and fragmented. Therefore, this review critically surveys the drying shrinkage behavior of alkali-activated binders with slag, fly ash and metakaolin. The mechanisms of the drying shrinkage and the factors that affect shrinkage are discussed. Different solutions to limit the shrinkage are also presented. Then, an analysis is conducted based on the literature, and the main chemical elements affecting the drying shrinkage of alkali-activated materials are proposed. Finally, the feasibility of using the developed empirical models for predicting the drying shrinkage of OPC concretes is also investigated for alkali activated binders. This review shows that alkali-activated slag binders generally have the higher rate of the drying shrinkage compared to other alkali activated binders, albeit, reinforcing the plain compositions with fibers, using expanding admixtures, curing at elevated temperatures, using a combination of slag with fly ash or metakaolin reduces successfully the drying shrinkage. Moreover, utilizing ternary diagrams, it is revealed that the molar ratio of Ca/Si has the greatest impact on the rate of drying shrinkage in the alkali-activated binders.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Yip, C. K., Lukey, G. C., & van Deventer, J. S. J. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.042 · Cited by 1,274
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Zhang, C., Khorshidi, H., Najafi, E., & Ghasemi, M. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135390 · Cited by 300
Zhang, B., Zhu, H., Cheng, Y., Huseien, G. F., & Shah, K. W. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125993 · Cited by 258
Preparation and Reaction Mechanism Characterization of Alkali-activated Coal Gangue–Slag Materials
Ma, H., Zhu, H., Yi, C., Fan, J., Chen, H., Xu, X., & Wang, T. (2019) · Materials · doi:10.3390/ma12142250 · Cited by 91
Shi, D., Yao, Y., Ye, J., & Zhang, W. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.288 · Cited by 65
Metadata
- Authors
- Mastali, M., Kinnunen, P., Dalvand, A., Mohammadi Firouz, R., & Illikainen, M.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 190
- Pages
- 533-550
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2892995733
- Cited by
- 468
- References
- 106
- FWCI
- 27.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Drying shrinkage in alkali-activated binders – A critical review. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2018.09.125
- The paper
- Mastali, M., Kinnunen, P., Dalvand, A., Mohammadi Firouz, R., & Illikainen, M. (2018). Drying shrinkage in alkali-activated binders – A critical review. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2018.09.125
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.