Colloidal Processing and Thermal Treatment of Binderless Hierarchically Porous Zeolite 13X Monoliths for CO 2 Capture
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Adsorbents with high surface area are potential candidates for efficient postcombustion CO 2 capture. Binderless zeolite 13X monoliths with a hierarchical porosity and high CO 2 uptake have been produced by slip casting followed by pressureless thermal treatment. The zeolite powder displayed an isoelectric point at pH 4.7 and electrostatically stabilized suspensions could be prepared at alkaline pH. The volume fraction‐dependent steady shear viscosity could be fitted to a modified Krieger–Dougherty model with a maximum volume fraction of 0.66. The narrow temperature range where monoliths could be produced without significant loss of the microporous surface area was identified and related to the phase behavior of the 13X material. Slip casting of concentrated suspensions followed by thermal treatment of the powder bodies at a temperature of 800°C without holding time resulted into strong hierarchically porous zeolite 13X monolith that displayed a CO 2 uptake larger than 29 wt%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Advances in principal factors influencing carbon dioxide adsorption on zeolites
Bonenfant, D., Kharoune, M., Niquette, P., Mimeault, M., & Hausler, R. (2008) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/9/1/013007 · Cited by 351
Cited by
Schwieger, W., Machoke, A. G., Weissenberger, T., Inayat, A., Selvam, T., Klumpp, M., & Inayat, A. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00599j · Cited by 575
Zeolites as Selective Adsorbents for CO2 Separation
Boer, D. G., Langerak, J., & Pescarmona, P. P. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c03605 · Cited by 481
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Self-citationPetrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Self-citation
Metadata
- Authors
- Akhtar, F., & Bergström, L.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2010-09-03
- Volume
- 94
- Issue
- 1
- Pages
- 92-98
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W1786106738
- Cited by
- 65
- References
- 2
- FWCI
- 7.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Colloidal Processing and Thermal Treatment of Binderless Hierarchically Porous Zeolite 13X Monoliths for CO 2 Capture. https://app.cochat.ai/papers/10.1111/j.1551-2916.2010.04044.x
- The paper
- Akhtar, F., & Bergström, L. (2011). Colloidal Processing and Thermal Treatment of Binderless Hierarchically Porous Zeolite 13X Monoliths for CO 2 Capture. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1551-2916.2010.04044.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.