Piezoelectric Materials for High Temperature Sensors
The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Abstract
Piezoelectric materials that can function at high temperatures without failure are desired for structural health monitoring and/or nondestructive evaluation of the next generation turbines, more efficient jet engines, steam, and nuclear/electrical power plants. The operational temperature range of smart transducers is limited by the sensing capability of the piezoelectric material at elevated temperatures, increased conductivity and mechanical attenuation, variation of the piezoelectric properties with temperature. This article discusses properties relevant to sensor applications, including piezoelectric materials that are commercially available and those that are under development. Compared to ferroelectric polycrystalline materials, piezoelectric single crystals avoid domain‐related aging behavior, while possessing high electrical resistivities and low losses, with excellent thermal property stability. Of particular interest is oxyborate [ ReCa 4 O ( BO 3 ) 3 ] single crystals for ultrahigh temperature applications (>1000°C). These crystals offer piezoelectric coefficients d eff , and electromechanical coupling factors k eff , on the order of 3–16 pC/N and 6%–31%, respectively, significantly higher than those values of α‐quartz piezocrystals (~2 pC/N and 8%). Furthermore, the absence of phase transitions prior to their melting points ~1500°C, together with ultrahigh electrical resistivities (>10 6 Ω·cm at 1000°C) and thermal stability of piezoelectric properties (< 20% variations in the range of room temperature ~1000°C), allow potential operation at extreme temperature and harsh environments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Ultrahigh strain and piezoelectric behavior in relaxor based ferroelectric single crystals
Park, S.-E., & Shrout, T. R. (1997) · Journal of Applied Physics · doi:10.1063/1.365983 · Cited by 4,157
Dielectric polarizabilities of ions in oxides and fluorides
Shannon, R. D. (1993) · Journal of Applied Physics · doi:10.1063/1.353856 · Cited by 2,798
(1971) · Elsevier eBooks · doi:10.1016/b978-0-12-379550-2.x5001-7 · Cited by 2,732
Elastic properties of zinc-blende and wurtzite AlN, GaN, and InN
Wright, A. F. (1997) · Journal of Applied Physics · doi:10.1063/1.366114 · Cited by 1,027
Thin Film Piezoelectrics for MEMS
Trolier-McKinstry, S., & Muralt, P. (2004) · Journal of Electroceramics · doi:10.1023/b:jecr.0000033998.72845.51 · Cited by 1,023
Piezoelectric Crystals and Their Applications to Ultrasonics
Mason, W. P., & Baerwald, H. (1951) · Physics Today · doi:10.1063/1.3067231 · Cited by 933
Properties of materials: anisotropy, symmetry, structure
(2005) · Choice Reviews Online · doi:10.5860/choice.42-6504 · Cited by 869
Current status and prospects of lead-free piezoelectric ceramics
Takenaka, T., & Nagata, H. (2005) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.03.125 · Cited by 868
Piezoelectric Sensors and Sensor Materials
Tressler, J. F., Alkoy, S., & Newnham, R. E. (1998) · Journal of Electroceramics · doi:10.1023/a:1009926623551 · Cited by 714
Materials for high temperature piezoelectric transducers
Damjanovic, D. (1998) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(98)80009-0 · Cited by 477
A Lead‐Free High‐Curie‐Point Ferroelectric Ceramic, CaBi2Nb2O9
Yan, H., Zhang, H., Ubic, R., Reece, M. J., Liu, J., Shen, Z., & Zhang, Z. (2005) · Advanced Materials · doi:10.1002/adma.200401860 · Cited by 440
Extensional piezoelectric coefficients of gallium nitride and aluminum nitride
Guy, I. L., Muensit, S., & Goldys, E. M. (1999) · Applied Physics Letters · doi:10.1063/1.125560 · Cited by 273
Gautschi, G. (2002) · Springer eBooks · doi:10.1007/978-3-662-04732-3 · Cited by 269
Li, F., Zhang, S., Xu, Z., Wei, X., Luo, J., & Shrout, T. R. (2010) · Journal of Applied Physics · doi:10.1063/1.3466978 · Cited by 268
Self-citationHigh Curie temperature piezocrystals in the BiScO3-PbTiO3 perovskite system
Zhang, S., Randall, C. A., & Shrout, T. R. (2003) · Applied Physics Letters · doi:10.1063/1.1619207 · Cited by 211
Self-citationCharacterization of high temperature piezoelectric crystals with an ordered langasite structure
Zhang, S., Zheng, Y., Kong, H., Xin, J., Frantz, E., & Shrout, T. R. (2009) · Journal of Applied Physics · doi:10.1063/1.3142429 · Cited by 185
Self-citationWang, C., & Wang, J. (2006) · Applied Physics Letters · doi:10.1063/1.2388253 · Cited by 120
Electromechanical properties of Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 single crystals
Li, F., Zhang, S. J., Lin, D., Luo, J. T., Xu, Z., Wei, X., & Shrout, T. R. (2011) · Journal of Applied Physics · doi:10.1063/1.3530617 · Cited by 109
Self-citationPiezoelectric Materials at Elevated Temperature
Schulz, M. J., Sundaresan, M. J., Mcmichael, J., Clayton, D., Sadler, R. L., & Nagel, B. (2003) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x03038577 · Cited by 102
Piezoelectric and electromechanical properties of ultrahigh temperature CaBi2Nb2O9 ceramics
Wang, C., Wang, J., Zhang, S. J., & Shrout, T. R. (2009) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.200802259 · Cited by 97
Self-citationThe temperature coefficient of capacitance
Cockbain, A. G., & Harrop, P. (1968) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/1/9/302 · Cited by 91
Reaney, I. M., & Damjanović, D. (1996) · Journal of Applied Physics · doi:10.1063/1.363301 · Cited by 75
Characterization of Neodymium Calcium Oxyborate Piezoelectric Crystal with Monoclinic Phase
Yu, F., Zhang, S. J., Zhao, X., Yuan, D., Wang, C., & Shrout, T. R. (2010) · Crystal Growth & Design · doi:10.1021/cg9015756 · Cited by 74
Self-citationAnisotropic Thermal Diffusivity and Conductivity of La‐Doped Strontium Niobate Sr 2 Nb 2 O 7
Sparks, T. D., Fuierer, P. A., & Clarke, D. R. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03533.x · Cited by 73
Synthesis and characterization of Sr3TaGa3Si2O14 single crystals
Takeda, H., Sato, J., Kato, T., Kawasaki, K., Morikoshi, H., Shimamura, K., & Fukuda, T. (2000) · Materials Research Bulletin · doi:10.1016/s0025-5408(00)00201-4 · Cited by 66
Yu, F., Zhang, S. J., Zhao, X., Yuan, D., Qin, L., Wang, Q., & Shrout, T. R. (2011) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2011.1881 · Cited by 64
Self-citationWang, C., Zhao, L., Wang, J., Zhang, S. J., & Shrout, T. R. (2008) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.200802225 · Cited by 60
Self-citationInvestigation of the dielectric and piezoelectric properties of ReCa 4 O(BO 3 ) 3 crystals
Yu, F., Zhang, S. J., Zhao, X., Guo, S., Duan, X., Yuan, D., & Shrout, T. R. (2011) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/44/13/135405 · Cited by 46
Self-citationTakeda, H., Tanaka, S., Izukawa, S., Shimizu, H., Nishida, T., & Shiosaki, T. (2006) · Proceedings/Proceedings - IEEE Ultrasonics Symposium · doi:10.1109/ultsym.2005.1602915 · Cited by 42
Takenaka, T., & Nagata, H. (2006) · Ferroelectrics · doi:10.1080/00150190600695982 · Cited by 27
Takeda, H., Kato, T., Chani, V. I., Morikoshi, H., Shimamura, K., & Fukuda, T. (1999) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(99)00203-0 · Cited by 26
Effect of aluminum substitution in La3Ga5SiO14 crystals on their structure and piezoelectricity
Takeda, H., Kumatoriya, M., & Shiosaki, T. (2001) · Applied Physics Letters · doi:10.1063/1.1426274 · Cited by 25
Takeda, H., Nakao, H., Izukawa, S., Shimizu, H., Nishida, T., Okamura, S., & Shiosaki, T. (2005) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2004.12.108 · Cited by 20
Cited by
Transferring lead-free piezoelectric ceramics into application
Rödel, J., Webber, K. G., Dittmer, R., Jo, W., Kimura, M., & Damjanovic, D. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.12.013 · Cited by 1,323
Piezoelectric and ferroelectric materials and structures for energy harvesting applications
Bowen, C. R., Kim, H. A., Weaver, P. M., & Dunn, S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42454e · Cited by 1,223
Zhang, S., Li, F., Jiang, X., Kim, J., Luo, J., & Geng, X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.10.002 · Cited by 875
Self-citationRecent progress of the Computational 2D Materials Database (C2DB)
Gjerding, M. N., Taghizadeh, A., Rasmussen, A., Ali, S., Bertoldo, F., Deilmann, T., Knøsgaard, N. R., Kruse, M., Larsen, A. H., Manti, S., et al. (2021) · 2D Materials · doi:10.1088/2053-1583/ac1059 · Cited by 575
Cao, M., Wang, X., Zhang, M., Cao, W., Fang, X., & Yuan, J. (2020) · Advanced Materials · doi:10.1002/adma.201907156 · Cited by 441
Metadata
- Authors
- Zhang, S., & Yu, F.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2011-08-29
- Volume
- 94
- Issue
- 10
- Pages
- 3153-3170
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2129343984
- Cited by
- 921
- References
- 34
- FWCI
- 15.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.