Vertical bone augmentation with 3D‐synthetic monetite blocks in the rabbit calvaria
Open accessThe DOI matches its Crossref record.
Abstract
Introduction: Long‐term success of osteointegrated dental implants requires sufficient volume of healthy bone at the recipient sites. However, this is frequently lacking as a result of trauma, tooth loss, or infection. Onlay autografting is amongst the most predictable techniques for craniofacial vertical bone augmentation, however, complications related to donor site morbidity are common and alternatives to onlay autografts are desirable. Aim: To develop and evaluate a new synthetic onlay block for vertical bone augmentation. Material and methods: Sixteen synthetic monetite monolithic discs‐shaped blocks were prepared using a 3D‐printing technique. The blocks were computer‐designed, and had a diameter of 9.0 mm, a thickness of either 4.0 mm (n = 8) or 3.0 mm (n = 8) and one 0.5‐mm wide central hole that enabled their surgical fixation with osteosynthesis screws. The blocks were randomly allocated to each side of the calvaria (right or left) of eight New Zealand rabbits and fixed with screws to achieve vertical bone augmentation. Eight weeks after the surgical intervention, the animals were sacrificed and the calvaria were retrieved for histological analysis. The following parameters were analysed: the interaction between the graft and the original bone surface, the amount of bone ingrowth within the graft and the gain in bone height achieved by the procedure. Wilcoxon t‐test was used to evaluate significant differences between the two types of monetite bone block grafts. Results: The blocks were easy to handle and no damage or fracture was registered while being screw‐fixated to the calvarial bone. As a result, the surgical procedure was easy and quick. After a healing of 8 weeks, the synthetic blocks were strongly fused to the calvarial bone surface. Upon histological observation, the monetite blocks appeared to be infiltrated by newly formed bone, without histological signs of necrosis, osteolysis or foreign body reaction. Histomorphometry revealed that bone augmentation occurred within and over the monetite block. The 4.0‐ and 3.0‐mm high blocks were filled with newly formed bone with 35% and 41% of their respective volumes. These observations indicated that craniofacial bone augmentations of at least 4 mm could be achieved with synthetic monetite blocks. Conclusion: Within the limits of our study, this novel material may be able to eliminate the need for autologous bone transplantation for the augmentation of large vertical bone defects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Horizontal bone augmentation by means of guided bone regeneration
Benic, G. I., & Hämmerle, C. H. F. (2014) · Periodontology 2000 · doi:10.1111/prd.12039 · Cited by 511
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1678-3 · Cited by 377
Recent advances in 3D printing of porous ceramics: A review
Hwa, L. C., Rajoo, S., Noor, A. M., Ahmad, N., & Uday, M. B. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2017.08.002 · Cited by 343
Powder-based 3D printing for bone tissue engineering
Brunello, G., Sivolella, S., Meneghello, R., Ferroni, L., Gardin, C., Piattelli, A., Zavan, B., & Bressan, E. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.03.009 · Cited by 296
Metadata
- Authors
- Torres, J., Tamimi, F., Alkhraisat, M. H., Prados‐Frutos, J. C., Rastikerdar, E., Gbureck, U., Barralet, J. E., & López‐Cabarcos, E.
- Venue
- Journal of Clinical Periodontology
- Publisher
- Wiley
- Published
- 2011-10-04
- Volume
- 38
- Issue
- 12
- Pages
- 1147-1153
- ISSN
- 0303-6979 (ISSN-L)
- 1600-051X
- OpenAlex
- W1986020948
- Cited by
- 80
- References
- 0
- FWCI
- 3.12
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Vertical bone augmentation with 3D‐synthetic monetite blocks in the rabbit calvaria. https://app.cochat.ai/papers/10.1111/j.1600-051x.2011.01787.x
- The paper
- Torres, J., Tamimi, F., Alkhraisat, M. H., Prados‐Frutos, J. C., Rastikerdar, E., Gbureck, U., Barralet, J. E., & López‐Cabarcos, E. (2011). Vertical bone augmentation with 3D‐synthetic monetite blocks in the rabbit calvaria. Journal of Clinical Periodontology. https://doi.org/10.1111/j.1600-051x.2011.01787.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.