The DOI matches its Crossref record; 77 of the 77 references it cites were found in a registry or an index.
Microwave Sintering: Fundamentals and Modeling
Abstract
This paper reviews the basic physical notions underlying microwave sintering and the theoretical and numerical models of the microwave sintering process. The propagation and absorption of electromagnetic waves in materials, and the distribution of electromagnetic field in cavity resonators that serve as applicators for microwave processing are discussed and the electromagnetic modeling of such applicators is reviewed. The microwave absorption properties of ceramic and metal powder materials and the methods of their description are addressed. Self‐consistent electromagnetic and thermal models that are capable of predicting the temperature distribution in the microwave‐heated materials and dynamic effects such as thermal runaway instabilities are reviewed. The multiphysics simulations that combine electromagnetic, thermal, and sintering models and result in predicting densification, shrinkage, and grain structure evolution are discussed in detail. The significance of microwave nonthermal effects in sintering is demonstrated based on the experimental results, and the models of such effects are reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Computational electrodynamics, the finite-difference time-domain method
Rycroft, M. J. (1996) · Journal of Atmospheric and Terrestrial Physics · doi:10.1016/0021-9169(96)80449-1 · Cited by 9,418
Bruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
Electrodynamics of Continuous Media
Kemmer, N. (1961) · Physics Bulletin · doi:10.1088/0031-9112/12/6/014 · Cited by 4,884
A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials
Hashin, Z., & Shtrikman, S. (1962) · Journal of Applied Physics · doi:10.1063/1.1728579 · Cited by 3,267
Munir, Z. A., Anselmi-Tamburini, U., & Ohyanagi, M. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-6555-2 · Cited by 2,257
Finite element method in electromagnetics
Ming, J. J. (2002) · International Linear Collider · Cited by 2,017
Electromagnetic Mixing Formulas and Applications
Sihvola, A. (1999) · doi:10.1049/pbew047e · Cited by 1,838
Stratton, J. A. (2015) · Wiley eBooks · doi:10.1002/9781119134640 · Cited by 1,173
Effect of Porosity and Grain Size on the Microwave Dielectric Properties of Sintered Alumina
Penn, S. J., Alford, N. M., Templeton, A., Wang, X., Xu, M., Reece, M., & Schrapel, K. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb03066.x · Cited by 1,053
Microwave Processing of Materials
Clark, D. E. (1996) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.26.1.299 · Cited by 1,030
Chantrey, P. (1983) · Electronics and Power · doi:10.1049/ep.1983.0309 · Cited by 1,021
Munir, Z. A. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05040-4 · Cited by 1,019
Gavin, M. R. (1963) · Physics Bulletin · doi:10.1088/0031-9112/14/9/017 · Cited by 909
Full sintering of powdered-metal bodies in a microwave field
Roy, R., Agrawal, D., Cheng, J., & Gedevanishvili, S. (1999) · Nature · doi:10.1038/21390 · Cited by 867
Synthesis of Inorganic Solids Using Microwaves
Rao, K. J., Vaidhyanathan, B., Ganguli, M., & Ramakrishnan, P. A. (1999) · Chemistry of Materials · doi:10.1021/cm9803859 · Cited by 803
Theory of sintering: from discrete to continuum
Olevsky, E. A. (1998) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(98)00009-6 · Cited by 728
Self-citationThe Method of Moments in Electromagnetics
Gibson, W. C. (2007) · Chapman & Hall/CRC eBooks · doi:10.1201/9781420061468 · Cited by 692
An Overview of Microwave Processing and Dielectric Properties of Agri-food Materials
Venkatesh, M. S., & Raghavan, G. S. V. (2004) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2004.01.007 · Cited by 688
Engineers' Handbook of Industrial Microwave Heating
Meredith, R. (1998) · Institution of Engineering and Technology eBooks · doi:10.1049/pbpo025e · Cited by 643
Dielectric Materials and Applications.
Smyth, C. P. (1955) · Journal of the American Chemical Society · doi:10.1021/ja01611a117 · Cited by 622
Sinterability of Agglomerated Powders
LANGE, F. F. (1984) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1984.tb09620.x · Cited by 520
Master Sintering Curve: A Practical Approach to Sintering
Su, H., & Johnson, D. L. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb08097.x · Cited by 506
Electric current activated/assisted sintering (ECAS): a review of patents 1906–2008
Grasso, S., Sakka, Y., & Maizza, G. (2009) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/10/5/053001 · Cited by 468
On constrained sintering—I. Constitutive model for a sintering body
Bordia, R. K., & Scherer, G. W. (1988) · Acta Metallurgica · doi:10.1016/0001-6160(88)90189-7 · Cited by 366
Sintering of Low‐Density Glasses: I, Theory
SCHERER, G. W. (1977) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1977.tb14114.x · Cited by 347
Microwave Sintering of Ceramics
Katz, J. (1992) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.22.1.153 · Cited by 339
Gupta, M., & Wong, E. W. L. (2007) · Wiley eBooks · doi:10.1002/9780470822746 · Cited by 311
Ida, N. (2004) · Springer eBooks · doi:10.1007/978-0-387-68624-0 · Cited by 308
Consolidation enhancement in spark-plasma sintering: Impact of high heating rates
Olevsky, E. A., Kandukuri, S. Y., & Froyen, L. (2007) · Journal of Applied Physics · doi:10.1063/1.2822189 · Cited by 280
Self-citationConsiderations of Inhomogeneity Effects in Sintering
Evans, A. G. (1982) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1982.tb10340.x · Cited by 245
Impact of Thermal Diffusion on Densification During SPS
Olevsky, E. A., & Froyen, L. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02705.x · Cited by 241
Self-citationViscoelastic stresses and sintering damage in heterogeneous powder compacts
Hsueh, C., Evans, A. G., Cannon, R. M., & Brook, R. J. (1986) · Acta Metallurgica · doi:10.1016/0001-6160(86)90066-0 · Cited by 226
Advances in Induction and Microwave Heating of Mineral and Organic Materials
(2011) · InTech eBooks · doi:10.5772/562 · Cited by 224
A diffusional creep law for powder compacts
McMeeking, R. M., & Kuhn, L. T. (1992) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(92)90073-n · Cited by 216
On constrained sintering—II. Comparison of constitutive models
Bordia, R. K., & Scherer, G. W. (1988) · Acta Metallurgica · doi:10.1016/0001-6160(88)90190-3 · Cited by 201
Riedel, H., Zipse, H., & Svoboda, J. (1994) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(94)90499-5 · Cited by 198
Svoboda, J., Riedel, H., & Zipse, H. (1994) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(94)90498-7 · Cited by 186
Numerical simulation of solid state sintering; model and application
Kraft, T., & Riedel, H. (2004) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(03)00222-x · Cited by 185
Radically different effects on materials by separated microwave electric and magnetic fields
Cheng, J., Roy, R., & Agrawal, D. (2002) · Materials Research Innovations · doi:10.1007/s10019-002-8642-6 · Cited by 179
Microwave heating of conductive powder materials
Rybakov, K. I., Semenov, V. E., Egorov, S. V., Eremeev, A. G., Plotnikov, I. V., & Bykov, Y. V. (2006) · Journal of Applied Physics · doi:10.1063/1.2159078 · Cited by 176
Self-citationEvidence for the Microwave Effect During Hybrid Sintering
Wang, J., Binner, J. G. P., Vaidhyanathan, B., Joomun, N., Kilner, J. A., Dimitrakis, G. A., & Cross, T. E. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.00976.x · Cited by 162
Deformation of Interparticle Necks by Diffusion‐Controlled Creep
Bouvard, D., & McMeeking, R. M. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb07927.x · Cited by 153
Overview no. 117 The structure of constitutive laws for the sintering of fine grained materials
Cocks, A. C. F. (1994) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(94)90299-2 · Cited by 126
Constitutive models for the sintering of ceramic components—I. Material models
Du, Z.-Z., & Cocks, A. C. F. (1992) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(92)90183-f · Cited by 125
Enhanced diffusion in sapphire during microwave heating
Janney, M. A., Kimrey, H. D., Allen, W. R., & Kiggans, J. (1997) · Journal of Materials Science · doi:10.1023/a:1018568909719 · Cited by 114
Thermal Conductivity of Zinc Oxide: From Green to Sintered State
Olorunyolemi, T., Birnboim, A., Carmel, Y. C., et al. (2002) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2002.tb00253.x · Cited by 108
Svoboda, J., & Riedel, H. (1992) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(92)90448-n · Cited by 102
Effect of gravity on dimensional change during sintering—I. Shrinkage anisotropy
Olevsky, E. A., & German, R. M. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00368-7 · Cited by 102
Self-citationAnalysis of the Sintering Pressure
Raj, R. (1987) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1987.tb05743.x · Cited by 97
Isotropic Constitutive Model for Sintering Particle Packings
Jagota, A., Mikeska, K. R., & Bordia, R. K. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb07587.x · Cited by 96
Heating of metallic powders by microwaves: Experiment and theory
Buchelnikov, V. D., Louzguine, D. V., Xie, G., Li, S., Yoshikawa, N., Sato, M., Петрович, А. А., Bychkov, I. V., & Inoue, A. (2008) · Journal of Applied Physics · doi:10.1063/1.3009677 · Cited by 95
Neck growth kinetics during microwave sintering of copper
Demirskyi, D., Agrawal, D. K., & Ragulya, A. V. (2009) · Scripta Materialia · doi:10.1016/j.scriptamat.2009.12.036 · Cited by 90
Comparative Study of Microwave Sintering of Zinc Oxide at 2.45, 30, and 83 GHz
Birnboim, A., Gershon, D., Calame, J. P., Birman, A., Carmel, Y. C., Rodgers, J., Levush, B., Bykov, Y. V., Eremeev, A. G., Holoptsev, V. V., et al. (1998) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1998.tb02508.x · Cited by 87
Temperature runaway of microwave irradiated materials
Roussy, G., Bennani, A., & Thiébaut, J.-M. (1987) · Journal of Applied Physics · doi:10.1063/1.339666 · Cited by 86
The microwave ponderomotive effect on ceramic sintering
Rybakov, K. I., Olevsky, E. A., & Semenov, V. E. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.02.043 · Cited by 84
Self-citationA dielectric mixing law for porous ceramics based on fractal boundaries
Calame, J. P., Birman, A., Carmel, Y. C., et al. (1996) · Journal of Applied Physics · doi:10.1063/1.363357 · Cited by 69
Saremi‐Yarahmadi, S., Vaidhyanathan, B., & Wijayantha, K. G. U. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.08.004 · Cited by 64
FDTD simulation of microwave sintering of ceramics in multimode cavities
Iskander, M. F., Smith, R. L., Andrade, A. O. M., Kimrey, H. D., & Wal, L. M. (1994) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/22.293527 · Cited by 63
Proposed model for the sintering of a dielectric in a microwave field
Meek, T. T. (1987) · Journal of Materials Science Letters · doi:10.1007/bf01770909 · Cited by 54
Densification and creep in the final stage of sintering
Riedel, H., Kozák, V., & Svoboda, J. (1994) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(94)90407-3 · Cited by 53
Theory and experiments of electromagnetic loss mechanism for microwave heating of powdered metals
Luo, J., Hunyar, C., Feher, L. E., Link, G., Thumm, M. K. A., & Pozzo, P. (2004) · Applied Physics Letters · doi:10.1063/1.1713032 · Cited by 53
Influence of Multiple Heterogeneities on Sintering Rates
Hsueh, C., Evans, A. G., & McMeeking, R. M. (1986) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1986.tb04752.x · Cited by 51
Constitutive models for the sintering of ceramic components—II. Sintering of inhomogeneous bodies
Du, Z.-Z., & Cocks, A. C. F. (1992) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(92)90184-g · Cited by 45
Effect of radiation losses on hotspot formation and propagation in microwave heating
Reimbert, C. (1996) · IMA Journal of Applied Mathematics · doi:10.1093/imamat/57.2.165 · Cited by 44
Olevsky, E. A., Dudek, H. J., & Kaysser, W. A. (1996) · Acta Materialia · doi:10.1016/1359-6454(95)00179-4 · Cited by 43
Self-citationCalculating the Thermal Conductivity of Heated Powder Compacts
Birnboim, A., Olorunyolemi, T., & Carmel, Y. C. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb00835.x · Cited by 43
Numerical Simulation of Heat Transfer during Microwave Heating of Magnetite
Peng, Z., Hwang, J., Andriese, M. D., Bell, W., Huang, X., & Wang, X. (2011) · ISIJ International · doi:10.2355/isijinternational.51.884 · Cited by 36
Simulation of Microwave Sintering of Ceramic Bodies with Complex Geometry
Birnboim, A., & Carmel, Y. C. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb02197.x · Cited by 34
Creep During Sintering of Porous Compacts
Rahaman, M. N., Jonghe, L. C. D., & Hsueh, C. (1986) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1986.tb04694.x · Cited by 33
A continuum theory for the mechanical response of materials to the thermodynamic stress of sintering
Reid, C. R., & Oakberg, R. G. (1990) · Mechanics of Materials · doi:10.1016/0167-6636(90)90043-f · Cited by 27
Pore Shrinkage and Sintering Stress
Jonghe, L. C. D., & RAHAMAN, M. L. (1984) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1984.tb19669.x · Cited by 23
Densification by sintering incorporating phase transformations
Olevsky, E. A., Skorohod, V. V., & Petzow, G. (1997) · Scripta Materialia · doi:10.1016/s1359-6462(97)00137-1 · Cited by 19
Self-citationA microstructure based numerical simulation of microwave sintering of specialized SOFC materials
Darcovich, K., Whitfield, P. S., Amow, G., SHINAGAWA, K., & Miyahara, R. Y. (2005) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.03.038 · Cited by 15
Microwave sintering of nanostructured ceramic materials
Bykov, Y. V., Rybakov, K. I., & Semenov, V. E. (2011) · Nanotechnologies in Russia · doi:10.1134/s1995078011050053 · Cited by 15
Self-citationFinite Element Approach to Microwave Sintering of Oxide Materials
Duan, Y., Sorescu, D. C., & Johnson, J. K. (2006) · Cited by 8
Get'man, O. I., Panichkina, V. V., Radchenko, P. Y., Skorokhod, V. V., Andreeva, M. G., Eremeev, A. G., & Kholoptsev, V. V. (2009) · Powder Metallurgy and Metal Ceramics · doi:10.1007/s11106-009-9132-9 · Cited by 5
Vaidhyanathan, B., Saremi‐Yarahmadi, S., & Wijayantha, K. G. U. (2011) · Ceramic engineering and science proceedings · doi:10.1002/9781118095362.ch2 · Cited by 3
Cited by
Mishra, R. R., & Sharma, A. K. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.035 · Cited by 895
Sun, J., Wang, W., & Yue, Q. (2016) · Materials · doi:10.3390/ma9040231 · Cited by 792
High-entropy alloys: emerging materials for advanced functional applications
Wang, X., Guo, W., & Fu, Y. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09601f · Cited by 524
Kitchen, H. J., Vallance, S. R., Kennedy, J. L., Tapia-Ruiz, N., Carassiti, L., Harrison, A., Whittaker, A. G., Drysdale, T. D., Kingman, S. W., & Gregory, D. H. (2014) · Chemical Reviews · doi:10.1021/cr4002353 · Cited by 511
Metadata
- Authors
- Rybakov, K. I., Olevsky, E. A., & Krikun, E. V.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2013-03-30
- Volume
- 96
- Issue
- 4
- Pages
- 1003-1020
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2116739883
- Cited by
- 358
- References
- 77
- FWCI
- 10.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.