The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Synthesis and Characterization of Geopolymer from Bayer Red Mud with Thermal Pretreatment
Abstract
A composite geopolymeric material was synthesized from Bayer red mud combined with granulated blast‐furnace slag. Thermal pretreatment was applied to improve the solubility of red mud in alkaline solution to promote geopolymerization. The dissolution efficiencies of alumina and silica reached a maximum when red mud was calcined at 800°C, resulting in the highest compressive strength of binders. It was demonstrated that a higher solubility of calcined red mud led to a higher strength of the composite binders. The characteristic microstructures of hydration products were studied to illustrate the geopolymerization process by XRD , FTIR and SEM . The results showed that aluminosilicates were dissolved in the alkaline solution to form nanostructural particulates during the early dissolution process, and then accumulated to form highly dense geopolymeric matrices through solidification reaction. The coexistence of geopolymer and C–(A)–S–H is suggested to contribute to the good performance of the composite binders.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
The geopolymerisation of alumino-silicate minerals
Xu, H., & Van Deventer, J. S. J. (2000) · International Journal of Mineral Processing · doi:10.1016/s0301-7516(99)00074-5 · Cited by 1,876
Geopolymer Chemistry and Applications
Davidovits, J. (2008) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,692
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
Alkali-activated fly ash/slag cements
Puertas, F., Martı́nez-Ramı́rez, S., Alonso, S., & Vázquez, T. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00298-2 · Cited by 921
Bauxite residue issues: I. Current management, disposal and storage practices
Power, G., Gräfe, M., & Klauber, C. (2011) · Hydrometallurgy · doi:10.1016/j.hydromet.2011.02.006 · Cited by 746
Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers
Panias, D., Giannopoulou, I. P., & Perraki, T. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.12.064 · Cited by 726
Van Jaarsveld, J. G. S., Van Deventer, J. S. J., & Lorenzen, L. (1997) · Minerals Engineering · doi:10.1016/s0892-6875(97)00046-0 · Cited by 674
Designing Precursors for Geopolymer Cements
Duxson, P., & Provis, J. L. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02787.x · Cited by 662
(Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement
Lecomte, I., Henrist, C., Liégeois, M., Maseri, F., Rulmont, A., & Cloots, R. (2006) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.12.021 · Cited by 597
Bauxite residue issues: II. options for residue utilization
Klauber, C., Gräfe, M., & Power, G. (2011) · Hydrometallurgy · doi:10.1016/j.hydromet.2011.02.007 · Cited by 580
The surface chemistry of Bayer process solids: a review
Hind, A. R., Bhargava, S. K., & Grocott, S. C. (1999) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(98)00798-5 · Cited by 544
Bauxite residue issues: III. Alkalinity and associated chemistry
Gräfe, M., Power, G., & Klauber, C. (2011) · Hydrometallurgy · doi:10.1016/j.hydromet.2011.02.004 · Cited by 513
Microstructural changes in alkali activated fly ash/slag geopolymers with sulfate exposure
Ismail, I., Bernal, S. A., Provis, J. L., Hamdan, S., & van Deventer, J. S. J. (2013) · Materials and Structures · doi:10.1617/s11527-012-9906-2 · Cited by 417
Synthesis and heavy metal immobilization behaviors of slag based geopolymer
Yunsheng, Z., Wei, S., Qianli, C., & Lin, C. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.09.033 · Cited by 398
Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization
Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390
Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder
Yip, C. K., & van Deventer, J. S. J. (2003) · Journal of Materials Science · doi:10.1023/a:1025904905176 · Cited by 365
Review on treatment and utilization of bauxite residues in China
Liu, W., Yang, J., & Xiao, B. (2009) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2009.08.005 · Cited by 293
Self-citationAlkali-activated metakaolin-slag blends—performance and structure in dependence of their composition
Buchwald, A., Hilbig, H., & Kaps, C. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0525-6 · Cited by 281
The effect of silica availability on the mechanism of geopolymerisation
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.02.001 · Cited by 279
Coal fly ash-slag-based geopolymers: Microstructure and metal leaching
Izquierdo, M., Querol, X., Davidovits, J., Antenucci, D., Nugteren, H. W., & Fernández‐Pereira, C. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.11.063 · Cited by 265
Microstructure and Microchemistry of Fully‐Reacted Geopolymers and Geopolymer Matrix Composites
Kriven, W. M., Bell, J. L., & Gordon, M. (2006) · Ceramic Transactions Series · doi:10.1002/9781118406892.ch15 · Cited by 259
UTILIZATION OF ALUMINA RED MUD FOR SYNTHESIS OF INORGANIC POLYMERIC MATERIALS
Dimas, D. D., Giannopoulou, I. P., & Panias, D. (2009) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827500802498199 · Cited by 214
Utilization of bauxite waste in ceramic glazes
Yalçın, N., & Sevinç, V. (2000) · Ceramics International · doi:10.1016/s0272-8842(99)00083-8 · Cited by 197
Yang, J., & Xiao, B. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.10.005 · Cited by 182
Self-citationWang, K., Shah, S. P., & Mishulovich, A. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.08.003 · Cited by 178
Solubility of aluminosilicates in alkaline solutions and a thermodynamic equilibrium model
Gasteiger, H. A., Frederick, W. J., & Streisel, R. C. (1992) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00004a031 · Cited by 103
Recovering metals from red mud generated during alumina production
Piga, L., Pochetti, F., & Stoppa, L. (1993) · JOM · doi:10.1007/bf03222490 · Cited by 98
Yip, C. K., Lukey, G. C., & Dean, J. S. J. V. D. (2006) · Ceramic transactions /Ceramic transactions · doi:10.1002/9781118406892.ch13 · Cited by 57
Cited by
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Clean production and properties of geopolymer concrete; A review
Amran, Y. H. M., Alyousef, R., Alabduljabbar, H., & El-Zeadani, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119679 · Cited by 901
Synthesis and strength optimization of one-part geopolymer based on red mud
Ye, N., Yang, J., Liang, S., Hu, Y., Hu, J., Xiao, B., & Huang, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.099 · Cited by 363
Self-citationGeopolymer-zeolite composites: A review
Rożek, P., Król, M., & Mozgawa, W. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.152 · Cited by 361
One‐Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends
Ke, X., Bernal, S. A., Ye, N., Provis, J. L., & Yang, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13231 · Cited by 283
Self-citation
Metadata
- Authors
- Ye, N., Yang, J., Ke, X., Zhu, J., Li, Y., Xiang, C., Wang, H., Li, L., & Xiao, B.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2014-02-04
- Volume
- 97
- Issue
- 5
- Pages
- 1652-1660
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2007036703
- Cited by
- 257
- References
- 29
- FWCI
- 24.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.