The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Early stage dissolution characteristics of aluminosilicate glasses with blast furnace slag‐ and fly‐ash‐like compositions
Abstract
Supplementary cementitious materials ( SCM ) have been used by the cement industry for decades to partly replace the portland cement fraction of concrete binders. This is particularly important today in addressing CO 2 emissions from the cement manufacturing process. However, defining the reactivity of these mainly aluminosilicate‐based materials and their influence on portland cement hydration chemistry has challenged the research community and has limited SCM replacement levels in cementitious binders. In this study, aluminosilicate glasses as models for blast furnace slag and fly‐ash systems were synthesized and exposed to different activator solutions in a continuously stirred closed system reactor for a period up to 3 hours. Solution compositions were measured from the very first minutes of dissolution and correlated with results from complementary solid surface analysis. Initial Ca concentration maxima in the first 30 minutes of exposure to the activating solution was a common feature in most dissolution profiles with a subsequent rapid decline attributable to Ca‐reincorporation on the reacting surface. Surface‐specific analysis confirmed Ca and Al enrichment at the surface, suggesting the formation of a Ca‐modified aluminosilicate layer, supporting a dissolution‐reprecipitation mechanism for SCM reactivity. Differing chemistries are thought to be responsible for the Ca and Al reintegration on the reacting surface depending on the pH of the solution; near‐neutral conditions favor Ca‐readsorption and surface condensation reactions, whereas alkaline solutions favor Ca‐reintegration via covalently bound phases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Kinetics of Mineral Dissolution
Brantley, S. L. (2008) · Kinetics of Water-Rock Interaction · doi:10.1007/978-0-387-73563-4_5 · Cited by 349
Cited by
Supplementary cementitious materials: New sources, characterization, and performance insights
Juenger, M. C. G., Snellings, R., & Bernal, S. A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.008 · Cited by 1,260
Reactivity of supplementary cementitious materials (SCMs) in cement blends
Skibsted, J., & Snellings, R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105799 · Cited by 984
Self-citationRheology of alkali-activated materials: A review
Lu, C., Zhang, Z., Shi, C., Li, N., Jiao, D., & Yuan, Q. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104061 · Cited by 283
Metadata
- Authors
- Newlands, K. C., Foss, M., Matchei, T., Skibsted, J., & Macphee, D. E.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2017-02-23
- Volume
- 100
- Issue
- 5
- Pages
- 1941-1955
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2590608491
- Cited by
- 158
- References
- 2
- FWCI
- 8.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.