The DOI matches its Crossref record.
A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations
Open accessAbstract
Objectives: Additive manufacturing (AM) technologies can be used to fabricate 3D‐printed interim dental restorations. The aim of this review is to report the manufacturing workflow, its chemical composition, and the mechanical properties that may support their clinical application. Overview: These new 3D‐printing provisional materials are typically composed of monomers based on acrylic esters or filled hybrid material. The most commonly used AM methods to manufacture dental provisional restorations are stereolithography (SLA) and material jetting (MJ) technologies. To the knowledge of the authors, there is no published article that analyzes the chemical composition of these new 3D‐printing materials. Because of protocol disparities, technology selected, and parameters of the printers and material used, it is notably difficult to compare mechanical properties results obtained in different studies. Conclusions: Although there is a growing demand for these high‐tech restorations, additional information regarding the chemical composition and mechanical properties of these new provisional printed materials is required. Clinical Significance: Additive manufacturing technologies are a current option to fabricate provisional dental restorations; however, there is very limited information regarding its chemical composition and mechanical properties that may support their clinical application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Piedra-Cascón, W., Krishnamurthy, V. R., Att, W., & Revilla-León, M. (2021) · Journal of Dentistry · doi:10.1016/j.jdent.2021.103630 · Cited by 387
Self-citationVat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Kim, D., Shim, J.-S., Lee, D., Shin, S.-H., Nam, N.-E., Park, K.-H., Shim, J.-S., & Kim, J.-E. (2020) · Polymers · doi:10.3390/polym12112762 · Cited by 253
Metadata
- Authors
- Revilla‐León, M., Meyers, M. J., Zandinejad, A., & Özcan, M.
- Venue
- Journal of Esthetic and Restorative Dentistry
- Publisher
- Wiley
- Published
- 2018-10-27
- Volume
- 31
- Issue
- 1
- Pages
- 51-57
- ISSN
- 1496-4155 (ISSN-L)
- 1708-8240
- OpenAlex
- W2898403014
- Cited by
- 204
- References
- 0
- FWCI
- 16.90
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.