The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Accuracy and Reliability of Methods to Measure Marginal Adaptation of Crowns and FDPs: A Literature Review
Open accessAbstract
Purpose: To review methods used to investigate marginal adaptation of crowns and fixed dental prostheses (FDPs), and to discuss testing variables employed and their influence on results. Methods: Online libraries including PubMed, Scopus, and Ovid were searched for articles evaluating the marginal adaptation of crowns and FDPs using a combination of the keywords: “marginal accuracy,” “marginal fit,” “marginal gap,” “marginal discrepancy,” “fitting accuracy,” “crown,” and “FPD.” Peer‐reviewed publications in English in the period 1970 to December 2011 were collected, evaluated by their abstract, and included if they met the inclusion criteria. The criteria involved studies evaluating marginal adaptation of crowns and FDPs through clear experimental protocols. Exclusion criteria involved longitudinal prospective and retrospective clinical evaluations, studies using subjective tactile sensation, and other predefined criteria. Results: A total of 277 papers were identified; only 183 met the inclusion criteria. Direct view technique was used by 47.5% of the articles followed by cross‐sectioning (23.5%), and impression replica (20.2%) techniques. The marginal gap values reported by these techniques varied among individual crown systems and across different systems because of variations in study type (in vivo vs. in vitro), sample size and measurements per specimen, finish line design, and stage at which the marginal gap was measured. Conclusion: There was a substantial lack of consensus relating to marginal adaptation of various crown systems due to differences in testing methods and experimental protocols employed. Direct view technique was the most commonly used method of reproducible results. Also, conducting an experimental set‐up of testing a minimum of 30 specimens at 50 measurements per specimen should produce reliable results. Additionally, using a combination of two measurement methods can be useful in verification of results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The estimation of cement film thickness by an in vivo technique
McLean, J. W., & von, F. (1971) · British Dental Journal · doi:10.1038/sj.bdj.4802708 · Cited by 1,383
Considerations in measurement of marginal fit
Holmes, J. R., Bayne, S. C., Holland, G. A., & Sulik, W. D. (1989) · The Journal of Prosthetic Dentistry · doi:10.1016/0022-3913(89)90170-4 · Cited by 769
Clinical complications in fixed prosthodontics
Goodacre, C. J., Bernal, G., Rungcharassaeng, K., & Kan, J. Y. K. (2003) · The Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(03)00214-2 · Cited by 588
Effect of in vivo crown margin discrepancies on periodontal health
Felton, D. A., Kanoy, B. E., Bayne, S. C., & Wirthman, G. P. (1991) · The Journal of Prosthetic Dentistry · doi:10.1016/0022-3913(91)90225-l · Cited by 430
Syrek, A., Reich, G., Ranftl, D., Klein, C., Cerny, B., & Brodesser, J. (2010) · Journal of Dentistry · doi:10.1016/j.jdent.2010.03.015 · Cited by 390
Reich, S., Wichmann, M. G., Nkenke, E., & Proeschel, P. (2005) · European Journal Of Oral Sciences · doi:10.1111/j.1600-0722.2004.00197.x · Cited by 364
Marginal and internal fit of all‐ceramic CAD/CAM crown‐copings on chamfer preparations
BINDL, A., & MÖRMANN, W. H. (2005) · Journal of Oral Rehabilitation · doi:10.1111/j.1365-2842.2005.01446.x · Cited by 363
Örtorp, A., Jönsson, D., Mouhsen, A., & von Steyern, P. V. (2010) · Dental Materials · doi:10.1016/j.dental.2010.11.015 · Cited by 337
Groten, M., Axmann, D., Pröbster, L., & Weber, H. (2000) · The Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(00)70087-4 · Cited by 308
Clinical fit of Procera AllCeram crowns
Boening, K. W., Wolf, B. H., Schmidt, A. E., Kästner, K., & Walter, M. H. (2000) · Journal of Prosthetic Dentistry · doi:10.1067/mpr.2000.109125 · Cited by 286
Fit of zirconia fixed partial denture: a systematic review
ABDUO, J., LYONS, K., & SWAIN, M. (2010) · Journal of Oral Rehabilitation · doi:10.1111/j.1365-2842.2010.02113.x · Cited by 249
Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology
Quante, K., Ludwig, K., & Kern, M. (2008) · Dental Materials · doi:10.1016/j.dental.2008.02.011 · Cited by 244
Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system
Baig, M. R., Tan, K. B.-C., & Nicholls, J. I. (2010) · The Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(10)60128-x · Cited by 236
The effect of cement thickness on the fracture strength of all‐ceramic crowns
Tuntiprawon, M., & Wilson, P. R. (1995) · Australian Dental Journal · doi:10.1111/j.1834-7819.1995.tb05607.x · Cited by 232
Clinical marginal and internal gaps of Procera AllCeram crowns
KOKUBO, Y., OHKUBO, C., TSUMITA, M., MIYASHITA, A., VULT VON STEYERN, P., & FUKUSHIMA, S. (2005) · Journal of Oral Rehabilitation · doi:10.1111/j.1365-2842.2005.01458.x · Cited by 216
In vitro marginal fit of three all-ceramic crown systems
Yeo, I.-S., Yang, J.-H., & Lee, J.-B. (2003) · The Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2003.08.005 · Cited by 213
Marginal and internal fits of fixed dental prostheses zirconia retainers
Beuer, F., Aggstaller, H., Edelhoff, D., Gernet, W., & Sorensen, J. (2009) · Dental Materials · doi:10.1016/j.dental.2008.04.018 · Cited by 199
Adaptation of all-ceramic fixed partial dentures
Borba, M., Cesar, P. F., Griggs, J. A., & Bona, Á. D. (2011) · Dental Materials · doi:10.1016/j.dental.2011.08.004 · Cited by 193
Gonzalo, E., Suárez, M. J., Serrano, B., & Lozano, J. F. L. (2009) · The Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(09)60198-0 · Cited by 179
Marginal fit of porcelain-fused-to-metal and two types of ceramic crown
Hung, S. H., Hung, K.-S., Eick, J. D., & Chappell, R. P. (1990) · The Journal of Prosthetic Dentistry · doi:10.1016/0022-3913(90)90260-j · Cited by 172
Kohorst, P., Brinkmann, H., Li, J., Borchers, L., & Stiesch, M. (2009) · European Journal Of Oral Sciences · doi:10.1111/j.1600-0722.2009.00622.x · Cited by 168
Preparation design and margin distortion in porcelain-fused-to-metal restorations
Shillingburg, H. T., Hobo, S., & Fisher, D. W. (1973) · Journal of Prosthetic Dentistry · doi:10.1016/0022-3913(73)90007-3 · Cited by 166
Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques
Witkowski, S., Komine, F., & Gerds, T. A. (2006) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2006.05.013 · Cited by 165
Periodontal tissue responses after insertion of artificial crowns and fixed partial dentures
Knoernschild, K. L., & Campbell, S. D. (2000) · The Journal of Prosthetic Dentistry · doi:10.1067/mpr.2000.110262 · Cited by 162
Evaluation of the marginal fit of three margin designs of resin composite crowns using CAD/CAM
Tsitrou, E. A., Northeast, S. E., & van Noort, R. (2007) · Journal of Dentistry · doi:10.1016/j.jdent.2006.04.008 · Cited by 159
Marginal adaptation of three different zirconium dioxide three-unit fixed dental prostheses
Att, W., Komine, F., Gerds, T. A., & Strub, J. R. (2009) · Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(09)60047-0 · Cited by 154
Tan, P. L. B., Gratton, D. G., Diaz-Arnold, A. M., & Holmes, D. C. (2008) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2008.00302.x · Cited by 147
Influence of firing cycles on the margin distortion of 3 all-ceramic crown systems
Balkaya, M. C., Cinar, A., & Pamuk, S. (2005) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2005.02.003 · Cited by 146
Effect of Sintering on the Marginal and Internal Fit of CAD/CAM-fabricated Zirconia Frameworks
Kunii, J., HOTTA, Y., Tamaki, Y., Ozawa, A., Kobayashi, Y., Fujishima, A., Miyazaki, T., & Fujiwara, T. (2007) · Dental Materials Journal · doi:10.4012/dmj.26.820 · Cited by 145
Wolfart, S., Wegner, S. M., Al-Halabi, A., et al. (2004) · PubMed · Cited by 142
Fit of single tooth zirconia copings: comparison between various manufacturing processes
Grenade, C., Mainjot, A. K. J., & Vanheusden, A. J. (2011) · Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(11)60040-1 · Cited by 138
Micro-CT evaluation of the marginal fit of different In-Ceram alumina copings.
Pelekanos, S., Koumanou, M., Koutayas, S. O., Zinelis, S., & Eliades, G. (2009) · The European journal of esthetic dentistry · Cited by 135
Vigolo, P., & Fonzi, F. (2008) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2008.00366.x · Cited by 135
Effect of crown margins on periodontal conditions in regularly attending patients
Bader, J. D., Rozier, R. G., McFall, W. T., & Ramsey, D. L. (1991) · The Journal of Prosthetic Dentistry · doi:10.1016/0022-3913(91)90053-y · Cited by 122
In vitro evaluation of the "replica technique" in the measurement of the fit of Procera crowns.
Rahme, H. Y., Tehini, G. E., Adib, S. M., Ardo, A. S., & Rifai, K. T. (2008) · PubMed · Cited by 118
Influence of Cervical Finish Line Type on the Marginal Adaptation of Zirconia Ceramic Crowns
Çömlekoğlu, E., Dundar, M. M., Özcan, M., Gungor, M., Gökçe, B., & Artunç, C. (2009) · Operative Dentistry · doi:10.2341/08-076-l · Cited by 109
Beuer, F., Aggstaller, H., Richter, J., Edelhoff, D., & GERNET, W. (2009) · Quintessence International · Cited by 107
Effect of preparation angles on the precision of zirconia crown copings fabricated by CAD/CAM system
Beuer, F., Edelhoff, D., GERNET, W., & Naumann, M. (2008) · Dental Materials Journal · doi:10.4012/dmj.27.814 · Cited by 107
Clinical and SEM evaluation of all‐ceramic chair‐side CAD/CAM‐generated partial crowns
Bindl, A., & Mörmann, W. (2003) · European Journal Of Oral Sciences · doi:10.1034/j.1600-0722.2003.00022.x · Cited by 103
Gassino, G., Monfrin, S. B., Scanu, M., Spina, G., & Preti, G. (2004) · PubMed · Cited by 102
Reich, S., Uhlen, S., Gozdowski, S., & Lohbauer, U. (2010) · Clinical Oral Investigations · doi:10.1007/s00784-010-0414-x · Cited by 93
Influence of the veneering process on the marginal fit of zirconia fixed dental prostheses
Kohorst, P., Brinkmann, H., Dittmer, M. P., Borchers, L., & Stiesch, M. (2010) · Journal of Oral Rehabilitation · doi:10.1111/j.1365-2842.2009.02053.x · Cited by 91
Fonseca, J. C., Henriques, G. E. P., Sobrinho, L. C., & de Góes, M. F. (2003) · Dental Materials · doi:10.1016/s0109-5641(03)00014-9 · Cited by 87
Clinical fit of four‐unit zirconia posterior fixed dental prostheses
Reich, S., Kappe, K., Teschner, H., & Schmitt, J. (2008) · European Journal Of Oral Sciences · doi:10.1111/j.1600-0722.2008.00580.x · Cited by 86
Clinical marginal and internal gaps of zirconia all-ceramic crowns
Kokubo, Y., Tsumita, M., Kano, T., Sakurai, S., & Fukushima, S. (2010) · Journal of Prosthodontic Research · doi:10.1016/j.jpor.2010.09.001 · Cited by 80
Stresses and distortions within zirconia-fixed dental prostheses due to the veneering process
Dittmer, M. P., Borchers, L., Stiesch, M., & Kohorst, P. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.04.025 · Cited by 80
Marginal accuracy and geometry of cast titanium copings
Blackman, R. B., Baez, R. J., & Barghi, N. (1992) · Journal of Prosthetic Dentistry · doi:10.1016/0022-3913(92)90068-l · Cited by 75
Influence of marginal configuration and porcelain addition on the fit of In-Ceram crowns
SHEARER, B. G., Gough, M. B., & Setchell, D. J. (1996) · Biomaterials · doi:10.1016/0142-9612(95)00302-9 · Cited by 74
Boeckler, A. F., Stadler, A., & Setz, J. M. (2005) · The Journal of Contemporary Dental Practice · doi:10.5005/jcdp-6-4-26 · Cited by 68
Marginal accuracy and internal fit of machine-milled and cast titanium crowns
Han, H.-S., Yang, H.-S., Lim, H., & Park, Y.-J. (2011) · Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(11)60120-0 · Cited by 67
Komine, F., Gerds, T. A., Witkowski, S., & Strub, J. R. (2005) · Acta Odontologica Scandinavica · doi:10.1080/00016350500264313 · Cited by 66
Two imaging techniques for 3D quantification of pre-cementation space for CAD/CAM crowns
Rungruanganunt, P., Kelly, J. R., & Adams, D. J. (2010) · Journal of Dentistry · doi:10.1016/j.jdent.2010.08.015 · Cited by 62
Marginal fidelity of crowns fabricated from six proprietary provisional materials
Tjan, A. H. L., Castelnuovo, J., & Shiotsu, G. (1997) · Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(97)70140-9 · Cited by 59
Marginal fit of 14‐unit zirconia fixed dental prosthesis retainers
Beuer, F., Neumeier, P., & Naumann, M. (2009) · Journal of Oral Rehabilitation · doi:10.1111/j.1365-2842.2008.01908.x · Cited by 57
Bottıno, M. A., Valandro, L. F., Buso, L., & Ozcan, M. (2007) · Quintessence International · Cited by 52
Influence of finish line design on marginal adaptation of electroformed metal-ceramic crowns
Shiratsuchi, H., Komine, F., Kakehashi, Y., & Matsumura, H. (2006) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2006.01.009 · Cited by 43
Fit of Porcelain Fused-to-metal Crown and Bridge Castings
Eden, G. T., Franklin, O., Powell, J. M., Ohta, Y., & Dickson, G. (1979) · Journal of Dental Research · doi:10.1177/00220345790580120501 · Cited by 43
Bronson, M. R., Lindquist, T. J., & Dawson, D. V. (2005) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2005.00048.x · Cited by 39
Precision of Fit of Two Margin Designs for Metal‐Ceramic Crowns
Limkangwalmongkol, P., Chiche, G. J., & Blatz, M. B. (2007) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2007.00186.x · Cited by 38
Comparison of methods of clinical evaluation of the marginal fit of complete cast gold crowns
Assif, D., Antopolski, B., Helft, M., & Kaffe, I. (1985) · Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(85)80062-7 · Cited by 37
Marginal Fit of Electroformed Ceramometal Crowns
Holmes, J. R., Pilcher, E. S., Rivers, J. A., et al. (1996) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.1996.tb00284.x · Cited by 36
Evaluation of high-temperature distortion of high-palladium metal-ceramic crowns
Papazoglou, E., Brantley, W. A., & Johnston, W. M. (2001) · Journal of Prosthetic Dentistry · doi:10.1067/mpr.2001.113707 · Cited by 33
Ayad, M. F. (2008) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2008.00398.x · Cited by 31
Marginal distortion of cast restorations induced by cementation
Moore, J. A., Barghi, N., Brukl, C. E., & Kaiser, D. A. (1985) · Journal of Prosthetic Dentistry · doi:10.1016/0022-3913(85)90545-1 · Cited by 26
Bhowmik, H., & Parkhedkar, R. (2011) · The Journal of Advanced Prosthodontics · doi:10.4047/jap.2011.3.4.196 · Cited by 20
Polansky, R., Heschl, A., Arnetzl, G. V., Haas, M., & Wegscheider, W. (2010) · international journal of stomatology & occlusion medicine · doi:10.1007/s12548-010-0052-6 · Cited by 6
Comparison of the fit of Procera crowns made from stone with those made from polyurethane resin.
Rahme, H. Y., Adib, S. M., Zebouni, E., Bechara, B., & Rifai, K. T. (2009) · PubMed · Cited by 3
Cited by
Marginal and internal fit of fixed prosthodontic constructions: a literature review
Heboyan, A. G. (2019) · International Journal of Dental Research and Reviews · doi:10.28933/ijdrr-2019-06-1105 · Cited by 35
In vitro microscopic evaluation of metal- and zirconium-oxide-based crowns’ marginal fit
Heboyan, A., Marya, A., Syed, A. U. Y., Khurshid, Z., Zafar, M. S., Rokaya, D., & Anastasyan, M. (2022) · Pesquisa Brasileira em Odontopediatria e Clínica Integrada · doi:10.1590/pboci.2022.010 · Cited by 15
Metadata
- Authors
- Nawafleh, N. A., Mack, F., Evans, J., Mackay, J., & Hatamleh, M. M.
- Venue
- Journal of Prosthodontics
- Publisher
- Wiley
- Published
- 2013-01-04
- Volume
- 22
- Issue
- 5
- Pages
- 419-428
- ISSN
- 1059-941X (ISSN-L)
- 1532-849X
- OpenAlex
- W1904073975
- Cited by
- 346
- References
- 67
- FWCI
- 11.27
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.