The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Wavelet Analysis and Envelope Detection For Rolling Element Bearing Fault Diagnosis—Their Effectiveness and Flexibilities
Abstract
The components which often fail in a rolling element bearing are the outer-race, the inner-race, the rollers, and the cage. Such failures generate a series of impact vibrations in short time intervals, which occur at Bearing Characteristic Frequencies (BCF). Since BCF contain very little energy, and are usually overwhelmed by noise and higher levels of macro-structural vibrations, they are difficult to find in their frequency spectra when using the common technique of Fast Fourier Transforms (FFT). Therefore, Envelope Detection (ED) is always used with FFT to identify faults occurring at the BCF. However, the computation of ED is complicated, and requires expensive equipment and experienced operators to process. This, coupled with the incapacity of FFT to detect nonstationary signals, makes wavelet analysis a popular alternative for machine fault diagnosis. Wavelet analysis provides multi-resolution in time-frequency distribution for easier detection of abnormal vibration signals. From the results of extensive experiments performed in a series of motor-pump driven systems, the methods of wavelet analysis and FFT with ED are proven to be efficient in detecting some types of bearing faults. Since wavelet analysis can detect both periodic and nonperiodic signals, it allows the machine operator to more easily detect the remaining types of bearing faults which are impossible by the method of FFT with ED. Hence, wavelet analysis is a better fault diagnostic tool for the practice in maintenance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564
Chui, C. K., & Heil, C. (1992) · Computers in Physics · doi:10.1063/1.4823126 · Cited by 4,732
McFadden, P. D., & Smith, J. D. (1984) · Tribology International · doi:10.1016/0301-679x(84)90076-8 · Cited by 813
APPLICATION OF WAVELETS TO GEARBOX VIBRATION SIGNALS FOR FAULT DETECTION
Wang, W. J., & McFadden, P. D. (1996) · Journal of Sound and Vibration · doi:10.1006/jsvi.1996.0226 · Cited by 470
Wavelet Analysis of Vibration: Part 1—Theory
Newland, D. E. (1994) · Journal of Vibration and Acoustics · doi:10.1115/1.2930443 · Cited by 300
Wavelet decomposition of vibrations for detection of bearing-localized defects
James Li, C., & Ma, J. (1997) · NDT & E International · doi:10.1016/s0963-8695(96)00052-7 · Cited by 180
Wavelet Analysis of Vibration: Part 2—Wavelet Maps
Newland, D. E. (1994) · Journal of Vibration and Acoustics · doi:10.1115/1.2930444 · Cited by 178
Prediction of Machine Deterioration Using Vibration Based Fault Trends and Recurrent Neural Networks
Tse, P. W., & Atherton, D. P. (1999) · Journal of Vibration and Acoustics · doi:10.1115/1.2893988 · Cited by 178
Self-citationAn Introduction to Machinery Analysis and Monitoring
Mitchell, J. S., & Saunders, H. (1982) · Journal of Mechanical Design · doi:10.1115/1.3256342 · Cited by 171
Mori, K., Kasashima, N., Yoshioka, T., & Ueno, Y. (1996) · Wear · doi:10.1016/0043-1648(95)06817-1 · Cited by 168
Cited by
Antoni, J., & Randall, R. B. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.002 · Cited by 1,333
Peng, Z. K., & Chu, F. L. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00075-x · Cited by 1,192
Condition monitoring of wind turbines: Techniques and methods
García Márquez, F. P., Tobias, A. M., Pinar Pérez, J. M., & Papaelias, M. (2012) · Renewable Energy · doi:10.1016/j.renene.2012.03.003 · Cited by 878
Peng, Z. K., Tse, P. W., & Chu, F. L. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.01.006 · Cited by 840
Self-citationDiez-Olivan, A., Del Ser, J., Galar, D., & Sierra, B. (2019) · Information Fusion · doi:10.1016/j.inffus.2018.10.005 · Cited by 633
A roller bearing fault diagnosis method based on EMD energy entropy and ANN
Yu, Y., YuDejie, & Junsheng, C. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.11.002 · Cited by 559
Application of EMD method and Hilbert spectrum to the fault diagnosis of roller bearings
Yu, D., Cheng, J., & Yang, Y. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00099-2 · Cited by 533
Bin, G. F., Gao, J. J., Li, X. J., & Dhillon, B. S. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.08.002 · Cited by 499
Multi-Layer domain adaptation method for rolling bearing fault diagnosis
Li, X., Zhang, W., Ding, Q., & Sun, J.-Q. (2019) · Signal Processing · doi:10.1016/j.sigpro.2018.12.005 · Cited by 477
Prognostics and Health Management: A Review of Vibration Based Bearing and Gear Health Indicators
Wang, D., Tsui, K.-L., & Miao, Q. (2018) · IEEE Access · doi:10.1109/access.2017.2774261 · Cited by 455
A summary of fault modelling and predictive health monitoring of rolling element bearings
El-Thalji, I., & Jantunen, E. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.02.008 · Cited by 447
Motor Bearing Fault Diagnosis Using Trace Ratio Linear Discriminant Analysis
Jin, X., Zhao, M., Chow, T. W. S., & Pecht, M. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273471 · Cited by 423
Deep residual learning-based fault diagnosis method for rotating machinery
Zhang, W., Li, X., & Ding, Q. (2019) · ISA Transactions · doi:10.1016/j.isatra.2018.12.025 · Cited by 416
An enhanced Kurtogram method for fault diagnosis of rolling element bearings
Wang, D., Tse, P. W., & Tsui, K. L. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.10.003 · Cited by 409
Self-citationLi, X., Zhang, W., & Ding, Q. (2019) · Signal Processing · doi:10.1016/j.sigpro.2019.03.019 · Cited by 383
A fault diagnosis approach for roller bearing based on IMF envelope spectrum and SVM
Yang, Y., Yu, D., & Cheng, J. (2007) · Measurement · doi:10.1016/j.measurement.2006.10.010 · Cited by 334
Intelligent condition monitoring of a gearbox using artificial neural network
Rafiee, J., Arvani, F., Harifi, A., & Sadeghi, M. H. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.08.005 · Cited by 330
Purushotham, V., Narayanan, S., & Prasad, S. A. N. (2005) · NDT & E International · doi:10.1016/j.ndteint.2005.04.003 · Cited by 297
A physics-informed deep learning approach for bearing fault detection
Shen, S., Lu, H., Sadoughi, M., Hu, C., Nemani, V., Thelen, A., Webster, K., Darr, M., Sidon, J., & Kenny, S. (2021) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2021.104295 · Cited by 293
Li, X., Zhang, W., & Ding, Q. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.05.021 · Cited by 271
Van, M., & Kang, H.-J. (2016) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1177/0954406215573976 · Cited by 46
Fault diagnosis of rolling bearings based on marginal Fisher analysis
Jiang, L., Shi, T., & Xuan, J. (2014) · Journal of Vibration and Control · doi:10.1177/1077546312463747 · Cited by 30
Metadata
- Authors
- Tse, P. W., Peng, Y. H., & Yam, R.
- Venue
- Journal of Vibration and Acoustics
- Publisher
- ASME International
- Published
- 2001-03-01
- Volume
- 123
- Issue
- 3
- Pages
- 303-310
- ISSN
- 0739-3717 (ISSN-L)
- 1048-9002
- 1528-8927
- OpenAlex
- W2021909145
- Cited by
- 422
- References
- 11
- FWCI
- 16.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.